All Practice Exams

100+ Free Red Seal Auto Body Technician Practice Questions

Pass your Red Seal Auto Body and Collision Technician (Interprovincial Standards Examination) exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
100+ Questions
100% Free

Loading practice questions...

2026 Statistics

Key Facts: Red Seal Auto Body Technician Exam

120

Exam Questions

Red Seal

70%

Passing Score

Red Seal

7

Major Work Activities

RSOS Auto Body

23.3%

Structural Repairs (largest MWA)

RSOS Auto Body

~$100-170

Provincial Exam Fee (CAD)

Provincial authorities

100

Free Practice Questions

OpenExamPrep

The Red Seal Auto Body and Collision Technician exam is the Interprovincial Standards Examination administered through Canada's Red Seal Program and delivered by provincial and territorial apprenticeship authorities. It is a 120-question, four-option multiple-choice exam built from the Red Seal Occupational Standard (RSOS) for Auto Body and Collision Technician, requiring 70% to pass. Questions are weighted across seven Major Work Activities: common occupational skills (12.5%), frame and structural repairs (23.3%), non-structural outer panel repairs (20%), mechanical/electrical/fuel repairs (10.8%), interior and restraint repairs (10%), refinishing procedures (18.3%), and detailing/cleaning (5%). Candidates typically complete an apprenticeship or qualify as a trade challenger, and fees vary by province (about $100-170 CAD). Earning the Red Seal endorsement allows a technician to work across Canada without re-examination. This free prep includes 100 research-based practice questions with explanations and an AI tutor.

Sample Red Seal Auto Body Technician Practice Questions

Try these sample questions to test your Red Seal Auto Body Technician exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1According to WHMIS 2015, what does a pictogram showing a flame over a circle indicate?
A.Flammable and combustible materials
B.Oxidizing materials
C.Corrosive materials to metals and skin
D.Biohazardous infectious materials
Explanation: A pictogram with a flame over a circle represents oxidizing hazards. Oxidizers can feed a fire by producing oxygen, making them highly dangerous around flammable substances. Flammable materials use a standard flame pictogram without a circle.
2Which type of respirator is required when spraying isocyanate-based polyurethane clearcoats?
A.A standard N95 particulate dust mask
B.A half-mask respirator with organic vapor cartridges only
C.A supplied-air respirator (SAR) or an approved fresh air system
D.A dual-cartridge respirator with HEPA particulate filters
Explanation: Isocyanates are highly sensitizing agents found in polyurethane paints and clearcoats. Because they have poor warning properties (you cannot smell them until you are already overexposed), a supplied-air respirator (SAR) is required for spraying operations in a booth to ensure breathing air is completely uncontaminated.
3Where should lifting pads be positioned when raising a unibody vehicle on a two-post frame contact lift?
A.Directly under the floorboards to distribute weight
B.At the OEM-designated pinch weld reinforced lift points
C.Under the front suspension lower control arms
D.Under the rear axle assembly
Explanation: Unibody vehicles are designed with reinforced pinch weld areas along the rocker panels for lifting. Placing lift pads anywhere else, such as the thin floorboards, can cause severe structural deformation and vehicle instability. Control arms and rear axles are suspension components and should not be used as frame-contact lift points.
4What is the correct procedure for disposing of solvent-soaked wiping rags in a collision shop?
A.Discard them in the standard open workshop trash bin
B.Place them in an approved, self-closing airtight metal container
C.Store them in a cardboard box until the end of the shift
D.Wash them in water and reuse them for cleaning dust
Explanation: Solvent-soaked rags are highly susceptible to spontaneous combustion due to the heat generated by the oxidation of solvents and thinners. Storing them in an approved, self-closing metal container limits the available oxygen, containing any potential ignition or chemical reaction.
5Which class of fire extinguisher is designated for fighting electrical fires?
A.Class A
B.Class B
C.Class C
D.Class D
Explanation: Class C fire extinguishers are designed for energized electrical equipment. Class A is for ordinary combustibles (wood, paper), Class B is for flammable liquids (grease, gasoline), and Class D is for combustible metals (magnesium, sodium). Using a Class A (typically water-based) extinguisher on an electrical fire carries a high risk of electric shock.
6How often should pneumatic tools, such as air grinders and DA sanders, be oiled to maintain performance and prevent internal corrosion?
A.Once a month
B.Once a week
C.Daily before use or at the beginning of each shift
D.Only when the tool starts to make noise or bind
Explanation: Air tools require regular lubrication because compressed air contains moisture that can corrode internal steel parts. Applying a few drops of air tool oil into the air inlet daily before use ensures smooth operation of the air motor and prevents vanes from sticking or wearing prematurely.
7When performing a positive-pressure fit check on a dual-cartridge respirator, how is it done?
A.Cover the cartridge inlets with your hands and inhale gently
B.Exhale gently while covering the exhalation valve opening with your palm
C.Tighten the headstraps until the facepiece collapses slightly
D.Spray a testing aerosol around the edges while breathing normally
Explanation: A positive-pressure fit check is performed by blocking the exhalation valve and exhaling gently. If the facepiece bulges slightly and no air leaks out around the edges, a proper seal is achieved. Blocking the cartridge inlets and inhaling is a negative-pressure check.
8What is the main purpose of using a wall-mounted air regulator filter/dryer system in a paint shop?
A.To increase the velocity of the air flowing to the spray guns
B.To remove oil, water, and solid contaminants from the compressed air line
C.To automatically mix air tool lubricant into the spray gun air line
D.To regulate the temperature of the air entering the spray booth
Explanation: Air compressors heat air, which condenses into water as it cools in the lines. Additionally, compressor pumps can bypass oil. A wall filter/dryer removes these contaminants, which would otherwise cause severe paint defects like fish-eyes, blistering, and water spots.
9If a worker splashes chemical paint thinner into their eyes, what is the minimum duration they must flush their eyes at an eyewash station?
A.3 to 5 minutes
B.15 to 20 minutes
C.At least 60 minutes
D.Flush until the pain stops completely
Explanation: For chemical splashes, safety standards (including CCOHS) require washing the eyes immediately with clean water for at least 15 to 20 minutes to ensure all corrosive or irritating chemicals are completely diluted and washed away, followed by immediate medical attention.
10Which organization in Canada regulates the transportation and disposal of hazardous waste materials, such as spent paints and solvents, from a collision repair facility?
A.Employment and Social Development Canada (ESDC)
B.The provincial or territorial ministry of the environment
C.WorkSafeBC or provincial occupational safety boards
D.Health Canada
Explanation: In Canada, while general transport rules fall under TDG (Federal), the specific regulation of hazardous waste disposal (waste manifests, licensing of waste haulers, and processing) is managed by provincial and territorial ministries of the environment.

About the Red Seal Auto Body Technician Exam

The Red Seal Auto Body and Collision Technician Interprovincial Standards Examination certifies journeyperson technicians across Canada. The exam has 120 four-option multiple-choice questions drawn from the Red Seal Occupational Standard's seven Major Work Activities, and you need 70% to earn the Red Seal endorsement, which is recognized in every province and territory.

Assessment

120 four-option multiple-choice questions covering seven Major Work Activities, single correct answer each; 70% to pass; this practice bank provides 100 research-based selected-response items

Time Limit

Up to 4 hours (varies by province)

Passing Score

70%

Exam Fee

~$100-170 CAD; varies by province (e.g., ~$150 + HST in Ontario) (Employment and Social Development Canada / Red Seal Program, delivered by provincial and territorial apprenticeship authorities)

Red Seal Auto Body Technician Exam Content Outline

12.5%

Performs Common Occupational Skills

Workshop safety, hand and power tools, hoisting and rigging, and material management

23.3%

Repairs Frame and Structural Components

Damage analysis, 3D frame measuring, anchoring, unibody pulling, structural welding, and sectioning

20.0%

Repairs Non-Structural Outer Body Panels and Related Components

Outer metal panels, doors, fenders, bumper covers, plastic repairs, glass, and adhesives

10.8%

Repairs Mechanical, Electrical and Alternative-Fuel System Components

Wheel alignment, suspension/steering components, cooling, electrical, ADAS, and hybrid/EV safety

10.0%

Repairs Interior Components and Services Restraint Systems

Interior trim, seat service, passive restraints (SRS), clock spring, airbags, and pre-tensioners

18.3%

Performs Refinishing Procedures

Surface prep, sanding, masking, primer/sealer, waterborne paints, clearcoat, and defects

5.0%

Performs Detailing and Cleaning

Compounding, polishing paint finishes, dirt nib removal, interior/exterior cleaning, and QC

How to Pass the Red Seal Auto Body Technician Exam

What You Need to Know

  • Passing score: 70%
  • Assessment: 120 four-option multiple-choice questions covering seven Major Work Activities, single correct answer each; 70% to pass; this practice bank provides 100 research-based selected-response items
  • Time limit: Up to 4 hours (varies by province)
  • Exam fee: ~$100-170 CAD; varies by province (e.g., ~$150 + HST in Ontario)

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

Red Seal Auto Body Technician Study Tips from Top Performers

1Weight your study toward structural repairs (23.3%) and outer panels (20.0%) - together they represent nearly half of the exam questions.
2Understand unibody anchoring and measuring: study 3D electronic measuring systems, tram gauges, datum lines, and pulling/anchoring setups.
3Know structural welding rules: GMAW (MIG) welding parameters, squeeze-type resistance spot welding (STRSW), silicon bronze brazing, and why you should never heat UHSS/Boron steels.
4Master refinishing chemistry: paint mixing ratios, flash times, waterborne basecoat application, solvent-borne clearcoats, and how to identify and prevent defects like solvent popping or fish-eyes.
5Review passive restraint safety: depowering SRS (airbags), handling clock springs, locating collision sensors, and post-collision replacement criteria.
6Complete all 100 practice questions and review every miss with the AI tutor before writing the actual exam.

Frequently Asked Questions

How many questions are on the Red Seal Auto Body and Collision Technician exam and how long is it?

The Red Seal Auto Body and Collision Technician Interprovincial exam has 120 four-option multiple-choice questions, each with one correct answer. You are typically allowed up to about four hours (this varies by province), and you need 70% to pass.

What score do I need to pass the Red Seal Auto Body exam?

You need 70% to pass and earn the Red Seal endorsement. Because the exam spans seven Major Work Activities from structural framing to electrical and paint refinishing, balanced preparation across every area is important.

How are the Red Seal Auto Body exam questions weighted?

The questions follow the Red Seal Occupational Standard: frame and structural repairs 23.3%, non-structural outer panels 20%, refinishing procedures 18.3%, common skills 12.5%, mechanical/electrical 10.8%, interior/restraints 10%, and detailing/cleaning 5%.

How much does the Red Seal Auto Body and Collision Technician exam cost?

The fee is set by your province or territory and generally falls around $100-170 CAD (for example, about $150 plus HST in Ontario). Your provincial apprenticeship office confirms the exact cost when you register.

Who is eligible to write the Red Seal Auto Body exam?

Candidates usually complete an auto body and collision technician apprenticeship (technical training plus on-the-job hours) or qualify as a trade challenger with sufficient verified experience. You apply to write the exam through your provincial or territorial apprenticeship authority.

Is this free Red Seal Auto Body practice as good as paid prep?

Our 100 practice questions cover the same seven Major Work Activities as the official Red Seal Occupational Standard, with a teaching explanation for every answer plus free daily AI tutor interactions. All content is free forever and updated for 2026.