How long is the ACP Revit for Architectural Design exam?

Autodesk gives candidates 120 minutes to complete the ACP Revit for Architectural Design certification exam. It is closed-book and taken without access to the Revit interface.

How many questions are on the exam?

Autodesk does not publish a fixed scored-question count on the official exam objectives document. All items are selected-response and designed to be answered without the software.

What passing score do I need?

Autodesk does not disclose the passing score to candidates. Exams are scored with a pass or fail result, and passing standards vary by certification.

How much experience does Autodesk recommend?

Autodesk recommends roughly 400 hours (minimum) to 1,200 hours (recommended) of real-world Revit experience, equivalent to about two years of regular use, before taking the ACP exam.

Where can I take the exam?

The exam is delivered at Pearson VUE test centers or online through OnVUE proctoring, so candidates can test in person or remotely.

What is the largest content area?

Modeling is the largest domain at 31% of the exam, followed by Documentation at 24% and Collaboration and coordination at 22%. Project standards and Information analysis are 11% each.

All Practice Exams

100+ Free ACP Revit Architecture Practice Questions

Autodesk Certified Professional in Revit for Architectural Design practice questions are available now; exam metadata is being verified.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

Not published Pass Rate

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

To make a particular view show only one specific design option instead of the primary, you:

Set the design option in the view's Visibility/Graphics > Design Options tab

Create a scope box

Delete the other options

Change the view phase

to track

Same family resources

Explore More Autodesk Certifications

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

2026 Statistics

Key Facts: ACP Revit Architecture Exam

120 min

Exam Duration

Autodesk Certification

Exam Domains

ACP Revit Architecture Exam Objectives

31%

Modeling Weighting

ACP Revit Architecture Exam Objectives

400-1,200 hr

Recommended Experience

Autodesk Certification

Pass / Fail

Score Reporting

Autodesk Certification

~$200

Exam Fee (USD)

Autodesk Certification

The ACP in Revit for Architectural Design is a professional-level, closed-book, selected-response exam delivered in 120 minutes at Pearson VUE or via OnVUE, with no access to Revit during testing. Autodesk distributes the content across five domains led by Modeling at 31%, followed by Documentation 24%, Collaboration and coordination 22%, and Project standards and Information analysis at 11% each. Results are pass or fail.

Sample ACP Revit Architecture Practice Questions

Try these sample questions to test your ACP Revit Architecture exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1In a wall type's Edit Assembly dialog, which layer function should be assigned to the primary load-bearing layer so Revit applies the correct wall-join cleanup priority?

A.Structure [1]

B.Substrate [2]

C.Thermal/Air Layer [3]

D.Finish 1 [4]

Explanation: Layer function priorities control how layers join at wall intersections, with Structure [1] having the highest priority so structural layers connect cleanly through. Assigning the load-bearing layer the Structure function ensures the core material wraps correctly.

2Which tool lets you add a continuous horizontal profile such as a base molding to the exterior face of a wall type within Edit Assembly?

A.Reveal

B.Sweep

C.Split Region

D.Modify Vertical Structure

Explanation: Wall Sweeps add a projecting profile (like a base or cornice molding) along a wall using a loaded profile family. They are defined in the Edit Assembly dialog under Modify Vertical Structure > Sweeps.

3When creating a curtain wall, what element divides the curtain grid into individual panels?

A.Mullions

B.Reveals

C.Curtain grid lines

D.Reference planes

Explanation: Curtain grid lines subdivide a curtain wall into a grid of cells; each cell holds a curtain panel. Mullions are then placed on the grid lines, but it is the grid lines themselves that define the panel boundaries.

4A sloped roof is needed on a footprint sketch. Which sketch property must be applied to the boundary lines that should pitch upward?

A.Defines Origin

B.Center of Rotation

C.Slope Arrow only

D.Defines Roof Slope

Explanation: In Roof by Footprint, selecting a boundary line and enabling Defines Slope (Defines Roof Slope) makes that edge pitch at the specified angle. Edges without this property stay horizontal at the eave.

5Which command attaches the top of a wall to the underside of a sloped roof so the wall follows the roof geometry?

A.Attach Top/Base

B.Join Geometry

C.Wall Joins

D.Coping

Explanation: Attach Top/Base lets you select a wall and then a target such as a roof or floor so the wall's top profile conforms to that element. This avoids manually editing the wall profile when the roof slope changes.

6When configuring a multistory stair, which parameter automatically duplicates a single stair run between connected levels?

A.Desired Number of Risers

B.Multistory Top Level

C.Actual Tread Depth

D.Begin with Riser

Explanation: Setting the Multistory Top Level property tells Revit to repeat the stair across all levels between the base and that top level, provided the level-to-level heights match. This creates a continuous multistory stair efficiently.

7To make a railing follow the slope of its host stair so it steps and ramps with the run, which railing setting is used?

A.Tread/Stringer Offset

B.Baluster Placement pattern

C.Host (the stair) plus Place on Host

D.Top Rail Type

Explanation: When a railing is hosted on a stair (placed on host), it automatically follows the stair's slope and landings. Selecting the railing and using Pick New Host or placing it directly on the stair establishes this hosting relationship.

8Which tool creates a vertical shaft opening that cuts through multiple floors, roofs, and ceilings at once?

A.By Face opening

B.Wall opening

C.Vertical opening (Dormer)

D.Shaft opening

Explanation: The Shaft opening tool cuts a single sketched opening through every floor, roof, and ceiling within a defined base and top constraint. It is ideal for elevator shafts and stairwells that must penetrate several levels.

9What distinguishes an architectural column from a structural column in Revit?

A.Architectural columns are non-load-bearing and used for finish/enclosure

B.Architectural columns carry analytical load data

C.Architectural columns can only be round

D.Architectural columns cannot be tagged

Explanation: Architectural columns are non-structural elements used to model enclosures, pilasters, and finishes; they can inherit the material of attached walls. Structural columns carry analytical/structural data and are placed from the Structure tab.

10Which command merges the geometry of two overlapping elements so they share a clean face and remove duplicate material between them?

A.Align

B.Join Geometry

C.Cut Geometry

D.Unjoin Geometry

Explanation: Join Geometry combines overlapping solids of joined elements, removing the visible line and shared volume between them so they read as a continuous assembly. It also controls cut order between joined elements.

About the ACP Revit Architecture Practice Questions

Verified exam format metadata for Autodesk Certified Professional in Revit for Architectural Design is pending. The practice questions above remain available while official exam length, timing, passing score, fee, and administrator details are reviewed.

100+ Free ACP Revit Architecture Practice Questions

Explore More Autodesk Certifications

Autodesk Certified Professional (ACP): AutoCAD

Autodesk Certified Professional (ACP): Civil 3D for Infrastructure Design

Autodesk Certified Professional (ACP): Fusion 360

Autodesk Certified Professional (ACP): Inventor

Autodesk Certified Professional (ACP): Revit for Electrical Design

Autodesk Certified Professional (ACP): Revit for Mechanical Design (MEP)

Key Facts: ACP Revit Architecture Exam

Sample ACP Revit Architecture Practice Questions

About the ACP Revit Architecture Practice Questions