PracticeStudy GuidesBlogFlashcardsEspañol
All Practice Exams

200+ Free ASNT NDT Level II Practice Questions

Pass your ASNT NDT Level II exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
Not publicly disclosed Pass Rate
200+ Questions
100% Free
1 / 200
Question 1
Score: 0/0

Which discontinuity is most likely to produce a clear relevant indication during magnetic particle testing?

A
B
C
D
to track
2026 Statistics

Key Facts: ASNT NDT Level II Exam

90

Written Questions

50 general + 40 specific

4 hours

Written Time Limit

2h + 2h

$800

Initial Fee

ASNT public page

5 years

Certification Validity

ASNT public page

30 days

Retest Wait

ASNT public page

70%-80%

Typical Cut-Score Range

ASNT psychometrics FAQ

As of March 12, 2026, ASNT's public NDT Level II exam page lists a 50-question, 2-hour general exam and a 40-question, 2-hour specific exam for each selected method. ASNT also states that certifications are valid for 5 years, retests require a 30-day wait, and exam cut scores are psychometrically set rather than published as one fixed number. The main current public update is ASNT's revised exam-topic rollout that began in late 2025, plus ASNT's note that 529 plan funds can now be used for qualifying credentialing expenses.

Sample ASNT NDT Level II Practice Questions

Try these sample questions to test your ASNT NDT Level II exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 200+ question experience with AI tutoring.

1Which discontinuity is most likely to produce a clear relevant indication during magnetic particle testing?
A.A surface-breaking crack in ferromagnetic steel that lies roughly perpendicular to the magnetic field
B.A deep internal void in aluminum
C.A smooth thickness change in nonmagnetic stainless steel
D.A lamination in brass far below the surface
Explanation: Magnetic particle testing is most effective on ferromagnetic materials and on surface or near-surface discontinuities. A crack that cuts across the magnetic field creates strong flux leakage, which attracts particles into a visible indication.
2Why is magnetic particle testing generally not used on aluminum parts?
A.Aluminum has too much electrical resistance for inspection current
B.Aluminum is not ferromagnetic and cannot hold the required magnetic flux for MT
C.Aluminum surfaces are always too rough for particle mobility
D.Aluminum cannot be cleaned well enough for nondestructive testing
Explanation: MT depends on establishing magnetic flux in the test object, so the material must be ferromagnetic. Aluminum is nonferromagnetic, which means it will not produce the flux leakage pattern needed to attract magnetic particles.
3When current is passed directly through a round bar between head stocks, what field is primarily produced and which discontinuities are best detected?
A.A longitudinal field that best reveals circumferential cracks
B.An alternating field that best reveals surface porosity only
C.A circular field that best reveals longitudinal discontinuities
D.A residual field that best reveals transverse cracks
Explanation: Direct current through the part creates a circular magnetic field around the current path. On a round bar, that field is perpendicular to longitudinal seams or cracks, so those indications are most likely to form clearly.
4A shaft is magnetized with a coil shot. Which field and discontinuity orientation are most associated with that setup?
A.A longitudinal field that best reveals longitudinal seams
B.A circular field that best reveals circumferential cracks
C.No useful field unless dry powder is used
D.A longitudinal field that best reveals circumferential cracks
Explanation: A coil produces a longitudinal magnetic field through the part. Circumferential cracks on a shaft cut across that field, so they create stronger leakage fields and are easier to detect.
5Why are two magnetization directions commonly required in magnetic particle testing?
A.Because a single field direction may miss discontinuities that run nearly parallel to that field
B.Because two directions are needed to make visible particles fluorescent
C.Because the first shot only cleans the surface and the second does the inspection
D.Because residual magnetism cannot form after only one shot
Explanation: Flux leakage is strongest when a discontinuity is roughly perpendicular to the field. Using two directions increases the chance of finding cracks or seams with different orientations on the same part.
6Wet fluorescent magnetic particles are often preferred for very fine fatigue cracking because they:
A.Are intended only for residual method inspections
B.Move more freely and usually provide higher sensitivity under UV-A
C.Eliminate the need to control magnetic field direction
D.Work equally well on nonferromagnetic alloys
Explanation: Wet fluorescent particles have good mobility and produce bright indications under proper UV-A viewing conditions. That combination usually makes them more sensitive than dry visible media for tight, fine surface cracks.
7Which situation most strongly favors dry visible powder instead of wet fluorescent particles?
A.A polished bearing race inspected in a dark booth for fine grinding cracks
B.A smooth aerospace part where maximum sensitivity is the top priority
C.A rough weldment inspected outdoors where wet media is impractical
D.A nonferromagnetic casting with internal shrinkage
Explanation: Dry powder is often chosen for rough surfaces, field work, or hotter parts where wet suspension is inconvenient. Wet fluorescent media is usually favored when maximum sensitivity on smooth surfaces is needed.
8An indication repeatedly forms at a sharp change in section, and follow-up checks show no cracking. How is that indication most likely classified?
A.A relevant crack indication
B.A subsurface inclusion
C.A false indication caused only by lack of magnetization
D.A nonrelevant indication caused by geometry or section change
Explanation: Nonrelevant indications come from real flux leakage, but the leakage is caused by geometry or material variation rather than a defect. Sharp fillets, keyways, and section changes commonly produce this kind of response.
9Residual magnetization method is least effective when the part material has which property?
A.Low retentivity and a tendency to lose most magnetism after current stops
B.High permeability and good particle mobility
C.A smooth machined surface
D.Discontinuities open to the surface
Explanation: Residual method depends on the part retaining enough magnetism after the current is removed. If the material has low retentivity, there may be too little residual field left to create useful particle indications.
10What is a central conductor commonly used for in magnetic particle testing?
A.Producing longitudinal magnetization in a flat plate
B.Producing circular magnetization in a hollow part without sending current through the part wall
C.Measuring UV-A intensity at the inspection surface
D.Demagnetizing small hand tools after inspection
Explanation: A current-carrying conductor placed through the bore of a hollow part creates a circular magnetic field around that conductor. This is useful for finding longitudinal discontinuities on the inside or outside of rings, sleeves, and similar parts.

About the ASNT NDT Level II Exam

ASNT NDT Level II is a method-specific certification path for nondestructive testing personnel working in industrial inspection. Public ASNT exam information lists separate written general and specific exams for MT, PT, RT, UT, and VT, so this practice bank blends those method families and common application judgment into one 200-question study set.

Assessment

Method-specific written package: one 50-question general exam plus one 40-question specific exam for the selected MT, PT, RT, UT, or VT method; practical and employer-based requirements may also apply outside this practice bank

Time Limit

4 hours total (2 hours general + 2 hours specific)

Passing Score

ASNT does not publish one fixed public pass percentage; psychometric cut scores typically fall in the 70%-80% range

Exam Fee

$800 initial exam package (ASNT Certification Services LLC)

ASNT NDT Level II Exam Content Outline

50 questions / 2 hours when selected

Magnetic Particle Testing (MT) General Exam

Principles of magnetism, magnetic-field production, magnetization techniques, field indicators, media selection, discontinuity interpretation, product technology, and demagnetization.

50 questions / 2 hours when selected

Liquid Penetrant Testing (PT) General Exam

Penetrant materials and process sequence, surface preparation, developer choice, dwell and development timing, indication interpretation, and procedure-driven setup.

50 questions / 2 hours when selected

Radiographic Testing (RT) General Exam

Radiation basics and protection, exposure technique, image quality, film or detector evaluation, discontinuity recognition, product technology, and procedure use.

50 questions / 2 hours when selected

Ultrasonic Testing (UT) General Exam

Sound propagation, transducers, straight- and angle-beam techniques, calibration, discontinuity detection, weld and base-material applications, and evaluation logic.

50 questions / 2 hours when selected

Visual Testing (VT) General Exam

Purpose and scope, tools and optics, lighting and vision, direct and indirect techniques, surface conditions, discontinuity recognition, documentation, and product technology.

40 questions / 2 hours

Specific Exam for the Selected Method

Procedure and code use, product forms, common discontinuity patterns in welds, castings, and forgings, technique selection, and application judgment for the chosen sector.

How to Pass the ASNT NDT Level II Exam

What You Need to Know

  • Passing score: ASNT does not publish one fixed public pass percentage; psychometric cut scores typically fall in the 70%-80% range
  • Assessment: Method-specific written package: one 50-question general exam plus one 40-question specific exam for the selected MT, PT, RT, UT, or VT method; practical and employer-based requirements may also apply outside this practice bank
  • Time limit: 4 hours total (2 hours general + 2 hours specific)
  • Exam fee: $800 initial exam package

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

ASNT NDT Level II Study Tips from Top Performers

1Choose your method focus first. Real ASNT Level II testing is method-specific, so your highest return comes from mastering the chosen MT, PT, RT, UT, or VT general-exam topics before spreading effort too widely.
2Treat the specific exam as more than code memorization. Practice reading procedures, matching the method to welds or product forms, and explaining why one setup is better than another.
3Build method fundamentals until the physics feels automatic. Magnetism, capillary action, radiation geometry, wave behavior, and visual conditions should not require last-minute recall tricks.
4Use timed 50-question and 40-question sets. The public ASNT timing format is part of the challenge, especially when questions require setup judgment instead of pure definition recall.
5Keep a defect notebook by product form. Track which discontinuities are surface-breaking, planar, volumetric, or orientation-sensitive so you can quickly eliminate weak answer choices.
6Review procedure compliance language carefully. Many misses come from skipping calibration, dwell, surface-prep, or documentation details that a Level II technician is expected to control.
7If you are pursuing RT, do not neglect radiation safety fundamentals. Those are foundational public exam topics and can cost easy points if you focus only on image interpretation.
8Pair written practice with hands-on method review whenever possible. Level II decisions are easier when the equipment, setup sequence, and inspection workflow are familiar.

Frequently Asked Questions

Is ASNT NDT Level II one single exam?

Not exactly. ASNT's public program information shows that Level II written testing is method-specific: you choose MT, PT, RT, UT, or VT and then take a general exam plus a specific exam for that method. Depending on the certification path and employer program, practical or employer-administered components may also apply.

How many questions are on the ASNT NDT Level II written exams?

ASNT's public NDT Level II page lists a 50-question general exam and a 40-question specific exam for the selected method. Each written exam has its own 2-hour time limit, so the standard written package totals 90 questions across 4 hours.

What score do I need to pass ASNT NDT Level II?

ASNT does not publish one universal fixed public pass percentage for NDT Level II. Its psychometrics FAQ explains that cut scores are determined statistically and that ASNT exam cut scores typically fall in the 70% to 80% range.

How much does the ASNT NDT Level II exam cost in 2026?

ASNT's public Level II page lists the initial exam package at $800. The same page also lists recertification at $400 and retesting at $300.

How long is ASNT NDT Level II certification valid?

ASNT's public page lists a 5-year certification period for NDT Level II. Candidates should review the applicable renewal or recertification path before the credential expires because continued qualification depends on ASNT program rules in force at that time.

What changed for ASNT NDT Level II in 2025 and 2026?

The main public program update is ASNT's revised exam-topic rollout that started in late 2025 and continues into 2026. ASNT also notes on its certification pages that 529 plan funds can now be used for credentialing expenses such as exam fees, training, books, and continuing education.

What is the retake policy for ASNT NDT Level II?

ASNT's public NDT Level II page states that the waiting period for a retest is 30 days. That makes it important to review weak areas by method and by specific-application content before scheduling another attempt.