Which iron-carbon phase has a face-centered cubic (FCC) crystal structure and exists at elevated temperatures in plain carbon steels?
Asnt Ndt Iii Basic Materials Processes
Question · Medium
Which heat treatment process is used primarily to soften a metal, relieve internal stresses, and refine grain structure by slow cooling from above the upper critical temperature?
Question · Easy
Organization that issues the Level III credential after a 135-question Basic examination and at least one method examination.
Certification programs
Guess the Term
Introduction & Exam Overview
1.1 Current Exam Facts
Study guide
Which welding process uses a continuously fed bare wire electrode and a shielding gas, and is sometimes called MIG welding?
Read the clue and guess the term in 6 tries.
Game
Which casting process uses a wax pattern that is melted out of a ceramic shell before molten metal is poured?
Another sitting of a failed ASNT Level III exam, requested by submitting a ___ Application in MyCert after the waiting period.
Which of the following is a typical discontinuity inherent to wrought rolled plate and oriented parallel to the rolling direction?
Asnt Ndt Iii Basic Discontinuities
Which NDT method is best suited for detecting surface-breaking discontinuities in non-ferromagnetic materials such as aluminum, stainless steel, and plastics?
Asnt Ndt Iii Basic Method Overview
What ASNT Level III holders must do to their certification every five years, submitting an application and payment before it expires.
1.2 Level III Role and Certification Path
According to SNT-TC-1A (2024), how is the document best characterized?
Asnt Ndt Iii Basic Snt Tc 1a
Swap tiles to line up three of the same term.
Term Match
Under SNT-TC-1A and CP-189, which document establishes the employer's specific qualification and certification practices?
Digital credential that ASNT emails to a newly certified Level III holder in place of a mailed paper certificate.
Which CP-189 requirement differs most clearly from SNT-TC-1A?
Asnt Ndt Iii Basic Cp 189
What is the primary purpose of ANSI/ASNT CP-105?
Asnt Ndt Iii Basic Cp 105
Hours a technician logs by method, technique and level in a career tracking tool.
Personnel development
1.3 Eligibility, Fees, Scheduling, and Retakes
Which carbon range generally classifies a steel as low-carbon (mild) steel?
Flip two cards at a time to find matching terms.
Term Pairs
Tempering is performed primarily to:
Kind of current induced in a conductive material by an alternating magnetic field, swirling in circular paths and weakening with depth.
Method overview
Which welding process uses a non-consumable tungsten electrode shielded by an inert gas such as argon?
A weld discontinuity that appears as a groove melted into the base metal adjacent to the weld toe and left unfilled is called:
Magnetic ___ leakage detected when energy escapes from steel at a crack, pit or thinned wall.
1.4 Study Strategy and Exam-Day Approach
Which discontinuity is generally classified as an inherent discontinuity in cast products?
Find five hidden terms in a grid of letters.
Term Search
Radiographic testing (RT) is fundamentally based on:
Device placed on the part with a liquid or gel couplant that converts electrical impulses into sound waves and back.
Which NDT method uses high-frequency mechanical vibrations introduced into a material to detect internal discontinuities?
Which NDT method relies on the principle that a discontinuity in a magnetized ferromagnetic part will distort magnetic flux and produce a leakage field at the surface?
Returned sound signal whose timing and strength let an ultrasonic inspector judge distance and discontinuity type.
Chapter 2: Materials Fundamentals for NDT
2.1 Ferrous Metals and Iron-Carbon Phases
A key limitation of magnetic particle testing is that:
Trades Exam Prep Podcast
Listen on Spotify
Podcast
Eddy current testing is best described as based on:
High-energy radiation emitted from unstable atomic nuclei and used with X-rays for industrial imaging.
Under SNT-TC-1A (2024), which of the following is a stated objective?
Which of the following is a key responsibility of a Level III as described in SNT-TC-1A?
Tracer gas chosen for its small atomic size and inertness, paired with a mass spectrometer to find extremely small leaks.
2.2 Non-Ferrous Metals and Alloys
Per SNT-TC-1A, examinations for Level I and Level II certification typically consist of:
Per SNT-TC-1A, what is the minimum composite score that is typically recommended for certification examinations?
Question · Hard
Visible formation that marks a leak location in the oldest, simplest pressure-and-soapy-water test.
Per SNT-TC-1A, near-vision acuity for NDT personnel is typically demonstrated by reading what test characters at a stated distance?
Loading more…