AM2 Electrical Installation Assessment (Applied Knowledge) Vocabulary Game
Exam terms with clues and explanations by OpenExamPrep.
About the AM2 Electrical Installation Assessment (Applied Knowledge) Vocabulary Games
4 free word games built on 20 AM2 Electrical Installation Assessment (Applied Knowledge) terms across 9 topics. Every game deals terms at random and shows what each term means, so you can keep playing as long as you like.
How to Play
- 1.Read the clue and type the term (3 to 6 letters).
- 2.Green: right spot. Yellow: wrong spot. Gray: not in the term.
- 3.Solve it in 6 tries, then read the explanation.
- 1.Swap two neighboring tiles to line up 3 of the same term.
- 2.Longer lines, two lines at once and chains score more.
- 3.Play until no swap can make a line.
- 1.Flip two cards. A matching pair stays face up.
- 2.Each pair you find shows what the term means.
- 3.Clear the board in as few moves as you can.
- 1.Find each listed term in the letter grid.
- 2.Drag across its letters: across, down or diagonally.
- 3.Find all five as fast as you can.
Explore More UK Construction & Electrotechnical Trades
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
Topics in the AM2 Electrical Installation Assessment (Applied Knowledge) Vocabulary Game
Safe isolation
Site safety
Inspection and testing
Shock prevention
Diagnosis and rectification
Consumer units
Conductor colours
Approved documents
Special locations
Sources for these terms (18)
- AM2 Assessment: Who It's For and How to Prepare · Source checked 2026-11-04
- RIDDOR explained · Source checked 2026-11-04
- COSHH basics: overview · Source checked 2026-11-04
- Using personal protective equipment (PPE) to control risks at work: Overview · Source checked 2026-11-04
- Provision and Use of Work Equipment Regulations 1998 (PUWER) - overview · Source checked 2026-11-04
- EICR Myths · Source checked 2026-11-04
- Minimizing unnecessary live testing for initial verification · Source checked 2026-11-04
- Mythbuster #11 - Adapting for change · Source checked 2026-11-04
- Which RCD Type? · Source checked 2026-11-04
- BS 7671 FAQs – Consumer Units and Protective Devices · Source checked 2026-11-04
- Co-ordination of electrical devices and auxiliary circuits · Source checked 2026-11-04
- Arc Fault Detection Devices (AFDD) – Reduce fire risk in your installation · Source checked 2026-11-04
- The history of colour identification of conductors · Source checked 2026-11-04
- Wiring Matters Issue 62 - Autumn 2016 · Source checked 2026-11-04
- Approved Document P: Electrical safety – Dwellings (2013 edition) · Source checked 2026-11-04
- BS 7671 FAQs – Earthing and Bonding · Source checked 2026-11-04
- Broken PEN · Source checked 2026-11-04
- Electricity at work: Safe working practices (HSG85, third edition) · Source checked 2026-11-05
About the AM2 / AM2S Exam
The AM2 (and its current versions AM2S and AM2E) is the industry end-point assessment that qualifying electricians in England, Wales and Northern Ireland must pass to confirm occupational competence. It is predominantly a practical assessment of safe isolation, composite installation, inspection and testing, and fault diagnosis, with an online applied-knowledge multiple-choice test (Section E) on health and safety, Building Regulations and BS 7671.
Exam sponsor: NET (National Electrotechnical Training), with the JIB; delivered at approved AM2 assessment centres. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.
Assessment
The AM2/AM2S is PREDOMINANTLY a PRACTICAL end-point assessment with about 16 to 19 hours of assessed section time. It comprises safe isolation & risk assessment, composite installation (single- and three-phase), inspection, testing & certification, safe isolation of circuits, and fault diagnosis & rectification, PLUS Section E — an online applied-knowledge test of 30 multiple-choice questions (45 in AM2S v1) on health & safety, Building Regulations and BS 7671. This is NOT a written-only MCQ exam; our 137 practice questions prepare you for the Section E applied-knowledge test and the underpinning theory tested across the practical sections.
Time Limit
Section times total 16 h 15 min (AM2), 17 h 45 min (AM2S) or 19 h (AM2S v1); the Section E online test is 1 hour (1.5 hours in AM2S v1)
Passing Score
Each section must be passed; Section E is graded by the centre against NET requirements
Exam / Certification Fees
AM2 £885; AM2S £965; AM2S v1 £1,340 (NET recommended prices, usually paid via the training centre)
Exam sponsor websiteFees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.
Official sources
Frequently Asked Questions
Is the AM2 vocabulary game free?
Yes. The game is free to play with no sign-up. Signing in adds AI explanations for any term.
How do the AM2 vocabulary games work?
There are 4 games built on 20 AM2 terms. In Guess the Term, a clue describes one term and you have six tries to spell it, with green, yellow and gray letters showing how close you are. In Term Match, six terms appear as colored tiles; swap neighbors to line up three or more of the same term, and each match shows what the term means. In Term Pairs, twelve face-down cards hide six pairs of terms; flip two at a time to find each pair, and every pair you find shows what the term means. In Term Search, five terms hide in a grid of letters, reading across, down or diagonally; drag across a term to circle it, and each term you find shows what it means.
Where do the AM2 terms come from?
OpenExamPrep researched each term from the NET (National Electrotechnical Training), with the JIB; delivered at approved AM2 assessment centres content outline and primary sources, listed under Sources on this page. The game is independent study material, not an official exam resource.
Is the AM2 a written exam or a practical assessment?
The AM2/AM2S is predominantly a PRACTICAL end-point assessment with about 16 to 19 hours of assessed section time, covering safe isolation, composite installation, inspection and testing, and fault diagnosis. It includes one online applied-knowledge test (Section E) of 30 multiple-choice questions (45 in AM2S v1), but it is not a written-only exam.
How many multiple-choice questions are in the AM2 Section E online test?
Section E, the Assessment of Applied Knowledge, is an online test of 30 multiple-choice questions in 1 hour for AM2 and AM2S, covering health and safety, Building Regulations and BS 7671. In AM2S v1 it has 45 questions in 1.5 hours and also covers inspection and testing, installation practices, fault diagnosis, design and planning, and behaviours. Our 137 practice questions target this test plus the underpinning theory across the practical sections.