Mississippi Journeyman Plumber Vocabulary Game
Exam terms with clues and explanations by OpenExamPrep.
About the Mississippi Journeyman Plumber Vocabulary Games
4 free word games built on 20 Mississippi Journeyman Plumber terms across 14 topics. Every game deals terms at random and shows what each term means, so you can keep playing as long as you like.
How to Play
- 1.Read the clue and type the term (3 to 6 letters).
- 2.Green: right spot. Yellow: wrong spot. Gray: not in the term.
- 3.Solve it in 6 tries, then read the explanation.
- 1.Swap two neighboring tiles to line up 3 of the same term.
- 2.Longer lines, two lines at once and chains score more.
- 3.Play until no swap can make a line.
- 1.Flip two cards. A matching pair stays face up.
- 2.Each pair you find shows what the term means.
- 3.Clear the board in as few moves as you can.
- 1.Find each listed term in the letter grid.
- 2.Drag across its letters: across, down or diagonally.
- 3.Find all five as fast as you can.
Explore More Plumber License
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.
Topics in the Mississippi Journeyman Plumber Vocabulary Game
General Plumbing Regulations
Safety
Cleanouts
Fixtures and Equipment
Water Heaters
Piping and controls
Water Supply
Pipe support
DWV piping
Backflow
Drainage fittings
Pipe measurement
Isometric Analysis
Joints and Connections
Sources for these terms (17)
- 2021 International Plumbing Code — Chapter 2 Definitions · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 305.3 Pipes through foundation walls · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 308.3 Materials · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 308.4 Structural attachment · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 504.7 Required pan · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 604.9 Water hammer · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 605.4 Water distribution pipe and Table 605.4 · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 606.2 Location of shutoff valves · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 704.1 Slope of horizontal drainage piping · Source checked 2026-11-06
- 2021 International Plumbing Code — Section 906.1 Size of stack vents and vent stacks · Source checked 2026-11-06
- 2024 International Plumbing Code — Chapter 2 Definitions · Source checked 2026-11-06
- 2024 Uniform Plumbing Code (IAPMO/ANSI UPC 1-2024), read-only edition · Source checked 2026-11-06
- Cross-Connection Control Manual (EPA 816-R-03-002), Appendix F Glossary · Source checked 2026-11-06
- Use of Lead Free Pipes, Fittings, Fixtures, Solder, and Flux for Drinking Water — US EPA · Source checked 2026-11-06
- Trenching and Excavation — Overview | Occupational Safety and Health Administration · Source checked 2026-11-06
- 29 CFR 1926.650 Scope, application, and definitions applicable to this subpart (2025 edition) · Source checked 2026-11-06
- 29 CFR 1926.652 Requirements for protective systems (2025 edition) · Source checked 2026-11-06
About the MS Plumber Exam
Mississippi's Plumbing trade exam, given by PSI for the State Board of Contractors, has 70 open-book questions on the 2021 IPC and OSHA construction safety, covering plumbing regulations, cleanouts, fixtures, water heaters, piping, water supply, hangers, drain-waste-vent, backflow, traps, developed length, isometric analysis and joints. Contractor applicants also take the 50-question Law and Business Management exam; 70% passes each.
Exam sponsor: Mississippi State Board of Contractors. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.
Questions
70 questions
Time Limit
3 hours
Passing Score
70%
Reported exam pass rate: ~55-65%. This describes exam candidates, not OpenExamPrep users or results from using our resources. Exam sponsor website
Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.
Official sources
Frequently Asked Questions
Is the MS Plumber vocabulary game free?
Yes. The game is free to play with no sign-up. Signing in adds AI explanations for any term.
How do the MS Plumber vocabulary games work?
There are 4 games built on 20 MS Plumber terms. In Guess the Term, a clue describes one term and you have six tries to spell it, with green, yellow and gray letters showing how close you are. In Term Match, six terms appear as colored tiles; swap neighbors to line up three or more of the same term, and each match shows what the term means. In Term Pairs, twelve face-down cards hide six pairs of terms; flip two at a time to find each pair, and every pair you find shows what the term means. In Term Search, five terms hide in a grid of letters, reading across, down or diagonally; drag across a term to circle it, and each term you find shows what it means.
Where do the MS Plumber terms come from?
OpenExamPrep researched each term from the Mississippi State Board of Contractors content outline and primary sources, listed under Sources on this page. The game is independent study material, not an official exam resource.
How hard is the Mississippi plumbing exam?
Mississippi does not publish pass rates. The Plumbing trade exam is open book, with 70 questions in 3 hours, and requires 70% to pass. Every contractor applicant also takes the 50-question Law and Business Management exam.
What is the business exam component?
The Law and Business Management exam is required for every commercial and residential contractor applicant. It has 50 open-book questions in 2 hours on licensing, estimating and bidding, lien law, financial management, tax and labor laws, project management, contracts, business organization, risk management, and environmental and safety rules, and requires 70% to pass.