100+ Free FL Gas Line Practice Questions
Prepare for the Florida Certified Gas Line Specialty Contractor Examination exam with instant access — no signup required.
Loading practice questions...
Explore More Florida CILB Certified Contractor Examinations
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
Key Facts: FL Gas Line Exam
70%
Passing score
DBPR
80
Scored questions
DBPR At a Glance
5 hrs
Time allowed
DBPR At a Glance
$135
Registration fee
Professional Testing, Inc.
4 yrs
Experience req
CILB
An 80-question, 5-hour, open-book, computer-based trade knowledge exam administered through Professional Testing, Inc. and Pearson VUE for the Florida CILB Gas Line Specialty license. These are independently written English-language multiple-choice study questions built from the official CILB Gas Line content outline; they are not official exam items and do not reproduce CILB's item bank or substitute for the open-book examination.
Sample FL Gas Line Practice Questions
Try these sample questions to test your FL Gas Line exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1A Florida Certified Gas Line Specialty Contractor is licensed to perform which scope of work?
2Which federal regulation establishes the minimum safety standards for transportation of natural and other gas by pipeline?
3Under the Florida Public Service Commission rules, safety of gas transported by pipeline is addressed in which chapter?
4When specifying steel pipe for a buried gas distribution main, the required wall thickness must include an allowance for which factor?
5What is the primary purpose of the Florida Department of Transportation Utility Accommodation Manual referenced on the Gas Line exam?
6Which ASTM standard governs polyethylene gas pressure pipe, tubing, and fittings used in gas distribution systems?
7API Spec 5L is an approved reference for the Gas Line exam. What does this specification cover?
8On a pipeline construction plan, a station label reads '7+50.' What distance does this represent from the starting station?
9A steel gas distribution main has an outside diameter of 8.625 inches and a wall thickness of 0.250 inches. What is the inside diameter, in inches?
10A new steel gas line will operate at a maximum allowable operating pressure (MAOP) of 80 psig. Federal pipeline safety rules require the strength test pressure to be at least 1.25 times the MAOP. What is the minimum test pressure?
About the FL Gas Line Exam
Covers the installation, modification, alteration, testing, repair, and maintenance of natural gas transmission and distribution systems and appurtenances within rights-of-way, easements, or terminating at the meter. Tested content includes general knowledge (corrosion allowances, piping-material codes, PSC and 49 CFR Part 192 rules, FDOT utility accommodation), testing and code compliance (pressure-limiting devices, regulators, distribution and transmission pressure tests), taps and connections (valve insertions, line stops, live hot taps), pigging and purging, maintenance (leak repair clamps, leak surveys, cathodic protection), welding and fusion (qualified WPS, welder qualification, bevel/root geometry, misalignment, PE butt and electrofusion, longitudinal joint factor), safety (OSHA Subpart P soil classification, sloping, shoring, shielding, One-Call/Chapter 556, ignition prevention, trucking rules), excavation (live and dead loads, casing, cover, directional drilling, de-watering, compaction), equipment (tapping machines, squeeze-off, fusion equipment, jack and bore, pumps, regulator stations, valves), materials (API Spec 5L line pipe, ASTM D 2513 PE pipe, design pressures by temperature, longitudinal E weld factor, pipe thickness), and location and investigation (APWA color codes, electromagnetic locating, tracer wire).
Questions
80 scored questions
Time Limit
5 hours
Passing Score
70%
Exam Fee
$135 registration + $80 per portion (Florida DBPR Bureau of Education and Testing; administered by Professional Testing, Inc. and Pearson VUE)
FL Gas Line Exam Content Outline
General Knowledge
Corrosion allowances, acceptable gas piping material codes, welding soundness test pressures, Public Service Commission rules (49 CFR Part 192, PSC Ch. 25-12), FDOT Utility Accommodation Manual, basic mathematics, and plan and code reading.
Testing and Code Compliance
Pressure-limiting devices, regulator selection for different gas systems, and testing requirements for gas distribution and transmission lines.
Taps and Connections
Fabricating and installing valve insertions, pressure line stops, live connections to existing pipes, and requirements for new service lines not in use.
Pigging and Purging
Performing pigging procedures and controlled purging procedures for gas pipelines.
Maintenance
Bolt-on leak repair clamps, gas pipeline repair techniques, leak detection surveys, and corrosion and cathodic protection monitoring.
Welding and Fusion
Preferred joining techniques for steel gas piping, pipe welding positions, surface preparation and electrode selection, bevel/root geometry and misalignment, welder and WPS qualification, NDE, plastic-metallic transition restrictions, and PE butt, electrofusion, and dissimilar-material fusion.
Safety
Federal OSHA 29 CFR 1926 Subpart P and state modifications, clearance from other underground structures, state and federal trucking regulations, preventing accidental ignition, confined-space and atmosphere testing, and trench protective systems.
Excavation
Live and dead load calculations, casing or bridging requirements, minimum coverage of steel and polyethylene pipe on private property, directional drilling, de-watering, compaction and compaction testing, and trenchless technology.
Equipment
Identifying and using equipment for hot taps and for general gas line construction, including tapping machines, squeeze-off tools, fusion equipment, boring, pumps, and regulator and valve equipment.
Materials
Minimum gas pipe design pressures by temperature range, default temperature ratings, longitudinal E weld factor for furnace lap welding, pipe thickness specifications, and maximum sizes for threaded steel.
Location and Investigation
Recognizing APWA color-coded systems for various materials, locating utilities, and identifying and locating tracer wire laid with pipe.
How to Pass the FL Gas Line Exam
What You Need to Know
- Passing score: 70%
- Exam length: 80 questions
- Time limit: 5 hours
- Exam fee: $135 registration + $80 per portion
Keys to Passing
- Work through all 100 available questions
- Review every answer and explanation
- Track weak areas and revisit them
- Use our AI tutor for tough concepts
FL Gas Line Study Tips from Top Performers
Frequently Asked Questions
Are these the real CILB exam questions?
No. These are independently written study questions built from the official CILB Gas Line content outline. They are an English-language MCQ study aid and do not reproduce CILB's item bank or substitute for the official open-book examination.
What is the format of the exam?
80 scored multiple-choice questions, 5 hours, open-book, computer-based at Pearson VUE centers, administered through Professional Testing, Inc. Passing score 70%.
Is the exam open-book?
Yes. Candidates may bring only the approved reference listed on the DBPR Construction Examinations Reference Lists (effective January 1, 2026), such as the Florida Fuel Gas Code, 49 CFR Part 192, OSHA 29 CFR 1926, API Spec 5L, and ASTM D 2513.
What experience is required?
Generally 4 years of trade experience including at least 1 year as a foreman, or a qualifying combination of education and experience; confirm with DBPR.