Career upgrade: Learn practical AI skills for better jobs and higher pay.
Level up
PracticeVideosBlogFlashcardsEspañol
All Practice Exams

300+ Free Rhode Island CDL General Knowledge Practice Questions

Pass your Rhode Island Commercial Driver License General Knowledge Test exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
300+ Questions
100% Free
1 / 300
Question 1
Score: 0/0

When backing a trailer around a corner (offset backing), the driver should:

A
B
C
D
to track
Same family resources

Explore More CDL General Knowledge Test

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Alabama CDL General Knowledge Test

Practice QuestionsFlashcards1 video3 blogs

Alaska CDL General Knowledge Test

Practice QuestionsFlashcards1 video3 blogs

Arizona CDL General Knowledge Test

Practice QuestionsFlashcards1 video3 blogs

Arkansas CDL General Knowledge Test

Practice QuestionsFlashcards1 video3 blogs

California CDL General Knowledge Test

Practice QuestionsFlashcards1 video3 blogs

Colorado CDL General Knowledge Test

Practice QuestionsFlashcards1 video3 blogs

More From This Family

Videos and articles for deeper review.

VideoFREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First TryVideoFREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First TryVideoFREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First TryVideoFREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First TryArticleBest High-Visibility Safety Vests for Construction, CDL & OSHA 30 in 202612 min readArticleBest Reflective Warning Triangles for CDL Pre-Trip Inspection Test 202611 min readArticleFREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First Try11 min read
2026 Statistics

Key Facts: Rhode Island CDL General Knowledge Exam

80%

Minimum passing score for CDL knowledge tests

FMCSA / 49 CFR 383.135

At least 30

Minimum basic knowledge-test items

FMCSA States CDL Knowledge & Skills Test

20

General knowledge areas for CMV operators

49 CFR 383.111(a)

$23.50

Rhode Island CDL knowledge test fee

RI DMV Commercial Fees

Rhode Island CDL applicants use RI DMV CDL services and should study the RI DMV Commercial Driver License Manual. FMCSA standards require the basic CDL knowledge test to cover the 20 general knowledge areas in 49 CFR 383.111(a), include at least 30 items, and require at least 80% correct to pass. RI DMV lists a $23.50 CDL knowledge test fee, $10.00 for each additional test, and separate CLP/CDL fees. Air brakes, combination vehicles, and endorsements may require separate knowledge tests.

Sample Rhode Island CDL General Knowledge Practice Questions

Try these sample questions to test your Rhode Island CDL General Knowledge exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 300+ question experience with AI tutoring.

1What is the first step in the seven-step pre-trip inspection method?
A.Approach the vehicle and check its general condition
B.Check under the hood
C.Start the engine and inspect inside the cab
D.Walk around and inspect the entire vehicle
Explanation: The first step of the seven-step pre-trip inspection is to approach the vehicle and look at its general condition. This includes checking for damage, whether the vehicle is leaning to one side, and looking under the vehicle for fresh leaks of oil, coolant, grease, or fuel. This initial overview can immediately reveal serious problems before you invest time in a detailed inspection.
2During a pre-trip inspection, what should you check in the engine compartment?
A.Only the oil level
B.Oil level, coolant level, power steering fluid, belts, and hoses
C.Only the coolant level and belts
D.Only items visible without opening any caps
Explanation: A thorough engine compartment inspection includes checking the oil level, coolant level in the radiator, power steering fluid, condition of belts and hoses for wear or cracks, and looking for leaks. You should also check the alternator, water pump, air compressor, and any other belt-driven components. Checking only one or two items could mean missing a critical problem that leads to a breakdown or safety hazard on the road.
3When performing a pre-trip inspection, the driver should ensure that the steering wheel free play (lash) does not exceed what limit?
A.5 degrees in either direction
B.10 degrees in either direction (approximately 2 inches on a 20-inch wheel)
C.15 degrees in either direction
D.20 degrees in either direction
Explanation: Federal Motor Carrier Safety Regulations require that steering wheel free play (lash) not exceed 10 degrees in either direction, which translates to roughly 2 inches of movement on a 20-inch diameter steering wheel before the front wheels begin to turn. Excessive free play indicates worn steering components and can make precise steering difficult, especially in emergency maneuvers. A vehicle with excessive steering lash would be placed out of service.
4During the cab check portion of a pre-trip inspection, you should test the parking brake by:
A.Driving forward slowly and applying the parking brake
B.Putting the vehicle in gear with the parking brake set and gently pressing the accelerator to see if the vehicle holds
C.Visually checking that the parking brake handle is in the correct position
D.Checking the parking brake cable under the vehicle
Explanation: To properly test the parking brake, set the parking brake, put the vehicle in a low gear, and gently press the accelerator to see if the brake holds the vehicle in place. This functional test confirms the parking brake can actually prevent the vehicle from moving, which is essential for safety when parked on grades. A visual check alone is insufficient because it does not verify that the brake mechanism is actually functioning properly.
5Which emergency equipment is required to be on a commercial motor vehicle?
A.Fire extinguisher, spare fuses, and three red reflective triangles
B.First aid kit, fire extinguisher, and flares only
C.Fire extinguisher and road flares only
D.Spare tire, jack, and reflective vest
Explanation: Federal regulations require every commercial motor vehicle to carry a properly charged and rated fire extinguisher (minimum 5 B:C rating, or two 4 B:C extinguishers), spare electrical fuses (unless the vehicle has circuit breakers), and three red reflective warning triangles (or equivalent). These items are checked during inspections and roadside enforcement stops. A vehicle missing any of these required items can be cited for a violation.
6A post-trip inspection report is important because:
A.It is only required for vehicles carrying hazardous materials
B.It alerts the carrier to vehicle defects that may need repair before the vehicle is driven again
C.It replaces the need for the next driver to do a pre-trip inspection
D.It is optional but recommended by the FMCSA
Explanation: The post-trip inspection report (also called a DVIR, or Driver Vehicle Inspection Report) is required by FMCSA regulations (49 CFR 396.11). Its purpose is to document any defects or deficiencies discovered at the end of the trip so the carrier can arrange repairs before the vehicle is dispatched again. The next driver must review the previous post-trip report and verify that any noted defects have been repaired or certified as not needing repair. It does not replace the next driver's pre-trip inspection obligation.
7During a pre-trip inspection, the driver notices a coolant leak near the water pump. What should the driver do?
A.Note it on the report and drive carefully to the next service stop
B.Add more coolant and continue the trip
C.Do not drive the vehicle until the leak is repaired
D.Drive only short distances and monitor the temperature gauge
Explanation: A coolant leak is a serious defect that can lead to engine overheating and catastrophic engine failure. The vehicle should not be driven until the leak is repaired. Driving with a coolant leak risks engine damage, potential fire (if coolant contacts hot exhaust components), and could result in a roadside breakdown in an unsafe location. FMCSA regulations require that defects affecting safe operation be corrected before the vehicle is driven.
8Which of the following is an out-of-service condition that would prevent a vehicle from being driven?
A.A small crack in the windshield that does not obstruct the driver's view
B.A missing mud flap on a rear wheel
C.Brake lining thickness below the minimum allowed by regulations
D.A broken antenna on the CB radio
Explanation: Brake lining worn below the minimum thickness specified in FMCSA out-of-service criteria is a critical safety defect. The North American Standard Out-of-Service Criteria lists specific thresholds: brake lining must not be less than 1/4 inch thick at the thinnest point for air-braked vehicles. When brake linings are too thin, braking effectiveness is severely compromised, and the vehicle must be placed out of service until repairs are made. A small windshield crack not in the driver's view, a missing mud flap, or a broken CB antenna are defects but not typically out-of-service conditions.
9During the pre-trip inspection, which of the following should a driver check regarding the exhaust system?
A.Only that the muffler is present
B.That the exhaust system is secure, not leaking, and not in contact with fuel lines, wiring, or air lines
C.Only that exhaust fumes are not entering the cab
D.That the catalytic converter is functioning properly by checking emissions color
Explanation: When inspecting the exhaust system, the driver should verify that all components are properly mounted and secured, there are no leaks (which could allow poisonous carbon monoxide to enter the cab), and the exhaust system is not in contact with fuel supply lines, wiring, or air brake lines. Heat from the exhaust can damage these components, potentially causing fuel leaks, electrical fires, or brake failures. A complete exhaust system inspection goes beyond just checking for the presence of a muffler.
10What is the minimum tread depth required for steer axle tires on a commercial motor vehicle?
A.2/32 of an inch
B.4/32 of an inch
C.6/32 of an inch
D.1/32 of an inch
Explanation: Federal regulations require steer axle tires to have a minimum tread depth of 4/32 of an inch (approximately 3.2 mm) in every major groove. Steer tires have a higher minimum than other axle positions (which require only 2/32 of an inch) because the steer tires are critical for directional control of the vehicle. Tires below this minimum are considered unsafe and will result in a violation or out-of-service order during an inspection.

About the Rhode Island CDL General Knowledge Exam

The Rhode Island CDL General Knowledge Test is the basic written knowledge exam for Rhode Island commercial learner permit and commercial driver license applicants. RI DMV publishes the Rhode Island Commercial Driver License Manual and commercial fee schedule, while FMCSA sets minimum CDL knowledge-test standards. FMCSA states that each basic knowledge test covers the 20 general areas in 49 CFR 383.111(a), contains at least 30 items, and requires at least 80% correct to pass. The test emphasizes safe CMV operation: vehicle inspection, basic control, shifting, speed and space management, seeing and communication, night and adverse-weather driving, emergencies and skids, railroad crossings, mountain driving, cargo securement, wellness and fatigue, alcohol and drug rules, and CDL licensing basics.

Assessment

Multiple-choice CDL knowledge test covering the basic general-knowledge areas required for commercial motor vehicle operators; air brakes, combination vehicles, and endorsements may require separate tests depending on the license sought.

Time Limit

Not published by RI DMV or FMCSA for the General Knowledge test

Passing Score

At least 80% correct on each CDL knowledge test

Exam Fee

$23.50 CDL knowledge test fee; $10.00 each additional test; $73.50 new CLP fee; separate CDL issuance or renewal fees may apply (Rhode Island Division of Motor Vehicles (RI DMV))

Rhode Island CDL General Knowledge Exam Content Outline

Core general-knowledge area

Vehicle Inspection

Pre-trip, en-route, and post-trip inspections; lights, mirrors, tires, wheels, steering, suspension, brakes, exhaust, coupling systems, cargo problems, emergency equipment, and defect reporting.

Core general-knowledge area

Basic Vehicle Control

Starting, stopping, steering, backing, turning, off-tracking, shifting, right turns, left turns, and controlling a large commercial motor vehicle.

Core general-knowledge area

Speed and Space Management

Stopping distance, following distance, traffic gaps, overhead clearance, curves, passing, merging, lane changes, and managing space around the CMV.

Core general-knowledge area

Seeing, Communication, and Hazards

Visual search, mirror use, seeing 12 to 15 seconds ahead, signaling, horn and light communication, hazard clues, and road-user behavior.

Core general-knowledge area

Adverse Conditions and Emergencies

Night driving, fog, rain, hydroplaning, snow, ice, high winds, hot weather, blowouts, brake failure, fires, crash response, skids, and ABS use.

Core general-knowledge area

Railroad Crossings and Mountain Driving

Railroad-highway crossing decisions, track clearance, low-clearance crossings, safe gear selection, downgrades, brake fade, escape ramps, and runaway prevention.

Core general-knowledge area

Cargo Securement and Weight

Cargo inspection intervals, blocking and bracing, working load limits, weight and balance, axle and tire loading, sealed loads, and driver responsibility for cargo safety.

Core general-knowledge area

Driver Wellness and CDL Rules

Fatigue, illness, medications, alcohol and drug effects, safety belts, mobile-phone restrictions, one-license rules, conviction notices, CDL classes, CLP basics, RI fees, and FMCSA standards.

How to Pass the Rhode Island CDL General Knowledge Exam

What You Need to Know

  • Passing score: At least 80% correct on each CDL knowledge test
  • Assessment: Multiple-choice CDL knowledge test covering the basic general-knowledge areas required for commercial motor vehicle operators; air brakes, combination vehicles, and endorsements may require separate tests depending on the license sought.
  • Time limit: Not published by RI DMV or FMCSA for the General Knowledge test
  • Exam fee: $23.50 CDL knowledge test fee; $10.00 each additional test; $73.50 new CLP fee; separate CDL issuance or renewal fees may apply

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

Rhode Island CDL General Knowledge Study Tips from Top Performers

1Read the RI DMV Commercial Driver License Manual before using practice questions; FMCSA says drivers should use their state manual to prepare for CDL testing.
2Master inspection language and defect consequences, especially brakes, tires, wheels, steering, suspension, lights, mirrors, cargo, and emergency equipment.
3Practice speed and space decisions until following distance, stopping distance, curves, clearance, traffic gaps, and railroad-crossing choices are automatic.
4Separate General Knowledge from air-brake, combination-vehicle, and endorsement tests so you know which additional Rhode Island tests you need.
5Review missed questions by topic and return to the corresponding RI DMV manual section instead of memorizing answer letters.
6Confirm current RI DMV fees, documents, non-domiciled CDL status, and office procedures before testing.

Frequently Asked Questions

Who administers the Rhode Island CDL General Knowledge Test?

The Rhode Island Division of Motor Vehicles administers Rhode Island CDL services and publishes CDL forms, the CDL manual, skills-test information, and commercial fee information on its official website.

How many questions are on the Rhode Island CDL General Knowledge Test?

RI DMV does not publish a separate public item count for the General Knowledge test. FMCSA requires each basic CDL knowledge test to contain at least 30 items, so applicants should treat 30 as the federal minimum and confirm current RI DMV testing procedures before visiting.

What score do I need to pass?

49 CFR 383.135 requires CDL applicants to correctly answer at least 80% of the questions on each CDL knowledge test, including general and endorsement knowledge tests.

How much does Rhode Island CDL knowledge testing cost?

RI DMV lists the CDL knowledge test fee as $23.50, with $10.00 for each additional test. RI DMV also lists separate CLP and CDL transaction fees, including a $73.50 fee for a new Commercial Learner Permit.

What should I study for Rhode Island CDL General Knowledge?

Use the RI DMV Commercial Driver License Manual as the primary source. Focus on vehicle inspection, basic control, shifting, speed and space, seeing and communication, adverse conditions, emergencies, railroad crossings, mountain driving, cargo, fatigue, alcohol and drug rules, and CDL licensing requirements.

Does General Knowledge cover air brakes or endorsements?

General Knowledge is the foundation. Air brakes, combination vehicles, hazardous materials, passenger, school bus, tanker, doubles/triples, and other endorsements or restrictions may require separate knowledge tests or skills-test elements depending on the license and vehicle.