100+ Free OR Fire Alarm Installer Practice Questions

Pass your Oregon Fire Alarm Installer Licensing Exam exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

~65-75% Pass Rate

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

Which Oregon state agency issues the Limited Energy Technician license required for fire alarm installation?

Oregon State Fire Marshal (OSFM)

Oregon Building Codes Division (BCD)

Oregon Department of Labor

Oregon Electrical Board

to track

2026 Statistics

Key Facts: OR Fire Alarm Installer Exam

100

Practice Questions

OpenExamPrep

70%

Passing Score

Oregon Building Codes Division (BCD)

2-3 hours

Exam Duration

Oregon Building Codes Division (BCD)

Varies

Exam Fee

Oregon Building Codes Division (BCD)

OR fire alarm installer exam tests NFPA 72, Oregon Fire Code, BCD licensing, protective signaling systems, and seismic installation requirements.

Sample OR Fire Alarm Installer Practice Questions

Try these sample questions to test your OR Fire Alarm Installer exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which Oregon state agency issues the Limited Energy Technician license required for fire alarm installation?

A.Oregon State Fire Marshal (OSFM)

B.Oregon Building Codes Division (BCD)

C.Oregon Department of Labor

D.Oregon Electrical Board

Explanation: The Oregon Building Codes Division (BCD) issues Limited Energy Technician licenses, which are required for fire alarm system installation. The BCD operates under the Department of Consumer and Business Services.

2What class of Limited Energy Technician license is required in Oregon to install fire alarm (protective signaling) systems?

A.Class B (LEB)

B.Class A (LEA)

C.Class C (LEC)

D.Any class

Explanation: Oregon requires a Class A Limited Energy Technician (LEA) license to work on protective signaling systems, which include fire alarms, burglar alarms, and nurse call systems. Class B (LEB) does not cover protective signaling.

3How many hours of work experience are required for an Oregon Class A Limited Energy Technician license through the apprenticeship path?

A.2,000 hours

B.4,000 hours

C.8,000 hours

D.12,000 hours

Explanation: Oregon requires 4,000 hours of work experience equivalent to a board-approved apprenticeship program for the Class A LEA license. The experience must be broken down into specific work categories as defined in OAR 918-282-0365.

4How many hours of work experience are required for the Oregon LEA license through the non-apprenticeship path?

A.4,000 hours

B.6,000 hours

C.8,000 hours

D.10,000 hours

Explanation: Oregon requires 8,000 hours of work experience broken down into specific work categories for applicants who did not complete a board-approved apprenticeship program. This is double the apprenticeship-path requirement.

5What training program must Oregon LEA license applicants complete?

A.A 16-hour safety course

B.A board-approved 32-hour training program

C.A 40-hour OSHA course

D.A 100-hour classroom program

Explanation: Oregon requires completion of a board-approved 32-hour training program for the Class A Limited Energy Technician license. This may be taken after the application is approved.

6Under Oregon law, who must employ a Limited Energy Technician performing fire alarm work?

A.Any general contractor

B.An electrical contractor, limited energy contractor, or single industrial plant

C.A plumbing contractor

D.No employer is required; they can work independently

Explanation: Oregon requires Class A Limited Energy Technicians to be employed by an electrical contractor, a limited energy contractor, or to work at a single industrial plant. Independent unlicensed work is not permitted.

7What fire code does Oregon adopt for fire alarm system requirements?

A.NFPA 1 exclusively

B.The Oregon Fire Code based on the International Fire Code with state amendments

C.Only local municipal codes

D.The California Fire Code

Explanation: Oregon adopts the Oregon Fire Code, which is based on the International Fire Code (IFC) with Oregon-specific amendments. The Oregon State Fire Marshal's office enforces this code statewide.

8Per NFPA 72, what is the standard spacing for smoke detectors on a smooth, flat ceiling?

A.20 feet

B.25 feet

C.30 feet

D.40 feet

Explanation: NFPA 72 specifies a nominal 30-foot spacing for spot-type smoke detectors on smooth, flat ceilings, covering approximately 900 square feet per detector. Adjustments may be needed for ceiling height, obstructions, and airflow.

9Under NFPA 72, what is the required secondary power capacity for a standard fire alarm system?

A.12 hours standby + 5 minutes alarm

B.24 hours standby + 5 minutes alarm

C.24 hours standby + 15 minutes alarm

D.48 hours standby + 10 minutes alarm

Explanation: NFPA 72 requires secondary (battery) power to provide 24 hours of standby operation followed by 5 minutes of alarm operation for standard fire alarm systems. EVAC systems require 15 minutes of alarm operation.

10What type of fire alarm system circuit provides redundant paths for survivability?

A.Class B

B.Class A

C.Class C

D.Class D

Explanation: Class A circuits provide redundant paths that allow continued operation even with a single open fault. If one path is broken, signals can still reach the FACP through the alternate return path.

About the OR Fire Alarm Installer Exam

The Oregon fire alarm installer exam covers the Class A Limited Energy Technician license requirements, including NFPA 72, Oregon Fire Code, and protective signaling systems.

Questions

100 scored questions

Time Limit

2-3 hours

Passing Score

70%

Exam Fee

Varies (Oregon Building Codes Division (BCD))

OR Fire Alarm Installer Exam Content Outline

20%

State Laws & Regulations

Oregon fire alarm licensing, permits, and regulatory requirements

25%

NFPA Codes

NFPA 72, NEC Article 760, fire alarm system code requirements

20%

System Design

Addressable/conventional systems, circuit design, battery calculations, control panels

20%

Installation Practices

Device placement, wiring methods, detector selection, plan review

15%

Inspection & Testing

Acceptance testing, periodic inspections, documentation, maintenance

How to Pass the OR Fire Alarm Installer Exam

What You Need to Know

Passing score: 70%
Exam length: 100 questions
Time limit: 2-3 hours
Exam fee: Varies

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

OR Fire Alarm Installer Study Tips from Top Performers

1Study Oregon state-specific fire alarm licensing requirements and regulations

2Master NFPA 72 including device spacing, circuit classifications, and testing requirements

3Review NEC Article 760 for fire alarm wiring methods and cable types

4Practice battery calculation problems including the 20% derating factor

5Understand Oregon fire code adoption and local amendments

Frequently Asked Questions

What is the Oregon fire alarm installer exam?

The Oregon exam tests knowledge of NFPA 72, state fire codes, system design, installation, and inspection for fire alarm systems.

What experience is needed?

4,000-8,000 hrs experience + 32-hour training program

Is the exam open book?

Reference materials may be permitted depending on the exam format. Check with the administering agency for specific policies.