100+ Free CA Fire Alarm Practice Questions

Pass your California Fire Alarm Installer License (C-10) exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

What California license is required for fire alarm system installation?

C-7 Low Voltage

C-10 Electrical Contractor

C-16 Fire Protection

C-46 Solar

to track

2026 Statistics

Key Facts: CA Fire Alarm Exam

72%

Passing Score

Contractors State License Board (CSLB)

100

Exam Questions

Contractors State License Board (CSLB)

Varies

Time Limit

Contractors State License Board (CSLB)

100 Q

Practice Questions

OpenExamPrep

Sample CA Fire Alarm Practice Questions

Try these sample questions to test your CA Fire Alarm exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What California license is required for fire alarm system installation?

A.C-7 Low Voltage

B.C-10 Electrical Contractor

C.C-16 Fire Protection

D.C-46 Solar

Explanation: California requires a C-10 Electrical contractor license from the CSLB for fire alarm system installation.

2What California agency issues contractor licenses for fire alarm work?

A.State Fire Marshal

B.Contractors State License Board (CSLB)

C.Department of Industrial Relations

D.Board of Equalization

Explanation: The CSLB issues the C-10 Electrical license required for fire alarm installation.

3What is the CSLB C-10 application fee?

A.200 dollars

B.350 dollars

C.450 dollars

D.600 dollars

Explanation: The CSLB charges 450 dollars for contractor license applications.

4What minimum passing score is required on CSLB exams?

A.60%

B.68%

C.72%

D.80%

Explanation: 72% minimum on both Law & Business and C-10 Trade exams.

5What two exams must C-10 applicants pass?

A.Trade exam only

B.Law & Business and C-10 Trade exam

C.Written and oral

D.NICET II and III

Explanation: Both exams with 72% minimum on each are required.

6What certification must CA employees working on fire alarms hold?

A.None

B.Valid Electrician Certificate from CA-DIR

C.Only OSHA 10

D.EPA cert

Explanation: CA-DIR Electrician Certificate is required for life safety system workers.

7What NICET level qualifies for CA State Fire Marshal license?

A.Level I

B.Level II

C.Level III or higher

D.No NICET needed

Explanation: NICET Level III or higher for State Fire Marshal licensing. Level II may work for other roles.

8What additional CSLB requirements beyond exams?

A.Only exams

B.Fingerprinting, background check, experience verification

C.College degree

D.5 years self-employment

Explanation: Fingerprinting, background check, and employer-certified experience are required.

9Maximum smoke detector spacing per NFPA 72?

A.20 ft

B.25 ft

C.30 ft

D.40 ft

Explanation: 30-foot nominal spacing on smooth ceilings.

10CA school fire alarm systems require compliance with?

A.Only local codes

B.Division of State Architect (DSA) plus NFPA 72

C.Only OSHA

D.Energy Commission

Explanation: Public schools need DSA approval plus NFPA 72 and CA Fire Code compliance.

About the CA Fire Alarm Exam

The California fire alarm installer exam covers state-specific regulations, NFPA 72 National Fire Alarm and Signaling Code, NEC Article 760 wiring requirements, fire alarm system design, installation practices, and inspection/testing procedures. Verified experience, fingerprinting, background check, CA-DIR Electrician Certificate.

Questions

100 scored questions

Time Limit

Varies

Passing Score

72%

Exam Fee

450 dollars application (Contractors State License Board (CSLB))

CA Fire Alarm Exam Content Outline

20%

State Laws & Licensing

California fire alarm installer licensing requirements, permits, and state-specific regulations

25%

NFPA 72 & NEC Codes

National Fire Alarm and Signaling Code, NEC Article 760, circuit classifications, and code compliance

20%

System Design

Fire alarm control panels, circuit design, battery calculations, notification appliance design

20%

Installation Practices

Detector placement, wiring methods, device installation, and code violation identification

15%

Inspection & Testing

Testing frequencies, acceptance testing, documentation, and maintenance requirements

How to Pass the CA Fire Alarm Exam

What You Need to Know

Passing score: 72%
Exam length: 100 questions
Time limit: Varies
Exam fee: 450 dollars application

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

CA Fire Alarm Study Tips from Top Performers

1Study California-specific fire alarm licensing requirements and regulatory structure

2Master NFPA 72 detector spacing, notification appliance requirements, and battery calculations

3Review NEC Article 760 for fire alarm wiring classifications (PLFA vs NPLFA) and cable types

4Practice battery sizing calculations using the 24-hour standby plus 5-minute alarm formula with 20% safety factor

5Learn the inspection and testing frequencies in NFPA 72 Chapter 14

Frequently Asked Questions

What is the California fire alarm installer exam?

The California fire alarm installer exam tests knowledge of state licensing requirements, NFPA 72, NEC Article 760, fire alarm system design, installation, and testing procedures.

What topics are covered?

The exam covers state regulations, NFPA 72 code requirements, system design including battery calculations and circuit design, installation practices, and inspection/testing procedures.

What NFPA standards should I study?

Focus on NFPA 72 (National Fire Alarm and Signaling Code) and NFPA 70/NEC Article 760 (fire alarm wiring requirements). These are the primary standards for fire alarm installation.