100+ Free SPM Produksi Reka Tanda Practice Questions

Prepare for the Sijil Pelajaran Malaysia (SPM) Produksi Reka Tanda — Subject Code 7405 exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Malaysia SPM, STPM & MUET Exams

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

2026 Statistics

Key Facts: SPM Produksi Reka Tanda Exam

SPM Produksi Reka Tanda (7405) is a Malay-language KSSM signage-production MPV elective with a 2-hour written Kertas 1 (40% weight) plus practical PBS coursework (60% weight); this bank is an English MCQ study aid covering design, fabrication, printing and entrepreneurship.

Sample SPM Produksi Reka Tanda Practice Questions

Try these sample questions to test your SPM Produksi Reka Tanda exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which STEM (Sains, Teknologi, Kejuruteraan dan Matematik) elective group does KSSM MPV Produksi Reka Tanda (subject code 7405) belong to under the Malaysian secondary curriculum?

A.Sains, Teknologi, Kejuruteraan dan Matematik (STEM)

B.Sastera dan Sains Sosial (Humanities)

C.Vokasional Perdagangan dan Keusahawanan

D.Bahasa dan Komunikasi

Explanation: KSSM MPV Produksi Reka Tanda is classified as a STEM elective subject in the Malaysian secondary vocational curriculum, alongside other technical/manufacturing MPV subjects such as Grafik Komunikasi Teknikal and Reka Bentuk Grafik Digital.

2In the Produksi Reka Tanda occupational safety module, what does the abbreviation JKKP stand for?

A.Jabatan Keselamatan dan Kesihatan Pekerjaan (Department of Occupational Safety and Health)

B.Jabatan Kerja Raya (Public Works Department)

C.Jawatankuasa Keselamatan Kilang dan Perusahaan

D.Jabatan Kebajikan dan Kesihatan Pekerja

Explanation: JKKP is the Jabatan Keselamatan dan Kesihatan Pekerjaan, also known internationally as DOSH (Department of Occupational Safety and Health), the Malaysian government department that enforces workplace safety regulations referenced throughout the PRT introduction module.

3What does the abbreviation NIOSH, referenced in the Produksi Reka Tanda safety module, stand for?

A.National Institute of Occupational Safety and Health (Malaysia)

B.National Insurance Organisation for Skilled Hands

C.National Institute for Standards and Hazards

D.National Industry Occupational Safety House

Explanation: NIOSH is the National Institute of Occupational Safety and Health Malaysia, the training and research institute that guides risk-assessment activities in the PRT introduction module.

4Under Malaysia's Akta Keselamatan dan Kesihatan Pekerjaan (AKKP), also referenced as OSHA in the Produksi Reka Tanda syllabus, which Act number and year established this legislation?

A.Act 514, 1994

B.Act 550, 1996

C.Act 342, 1984

D.Act 622, 2002

Explanation: The Occupational Safety and Health Act (Akta Keselamatan dan Kesihatan Pekerjaan) is Act 514, enacted in 1994, and remains the core OSH legislation referenced in the PRT introduction module.

5The Produksi Reka Tanda introduction module links workplace sustainability to three specific elements. Which set is correct?

A.Social, economic and environmental elements

B.Political, cultural and religious elements

C.Financial, technical and legal elements

D.National, regional and global elements

Explanation: The DSKP notes for the introduction module list social (sosial), economic (ekonomi) and environmental (alam sekitar) elements as the sustainability dimensions students must justify when discussing green technology practice in signage production.

6Which industry do the Produksi Reka Tanda career-prospect learning outcomes primarily prepare students for?

A.The signage and advertising (pengiklanan) industry

B.The automotive repair industry

C.The food processing industry

D.The textile and garment industry

Explanation: The introduction module explicitly covers career prospects and the agencies involved in the advertising (pengiklanan) industry, since Produksi Reka Tanda trains students in signage design and production for that sector.

7According to the Produksi Reka Tanda safety module, students' risk-assessment and risk-management activities are developed with reference to guidance from which body?

A.NIOSH (National Institute of Occupational Safety and Health Malaysia)

B.SIRIM (Institut Piawaian dan Penyelidikan Perindustrian Malaysia)

C.Suruhanjaya Syarikat Malaysia (SSM)

D.Lembaga Peperiksaan Malaysia

Explanation: The content standard 1.2.3 requires students to apply risk-assessment and risk-management activities based on NIOSH guidance, distinct from SIRIM (industrial standards) or SSM (business registration).

8What is the primary purpose of the professional values and ethics standard in the Produksi Reka Tanda introduction module?

A.To help students recognise the importance of ethical, professional conduct within the signage and advertising industry

B.To teach students how to calculate income tax for a signage business

C.To certify students as licensed electricians

D.To replace the need for workshop safety training

Explanation: Content standard 1.1.4 requires students to detect the importance of professional values and ethics in the Produksi Reka Tanda field, building sound workplace conduct alongside the technical skills taught in later modules.

9JKKP, AKKP and NIOSH each play a different role in Malaysia's occupational safety and health system referenced in Produksi Reka Tanda. Which statement correctly distinguishes their functions?

A.AKKP is the legislation (the Act), JKKP is the enforcing government department, and NIOSH is the training and research institute

B.JKKP is the legislation, AKKP is the enforcing department, and NIOSH is a private insurance provider

C.NIOSH is the legislation, JKKP is the training institute, and AKKP is a workers' union

D.AKKP, JKKP and NIOSH are three different names for the same single government department

Explanation: AKKP (Akta Keselamatan dan Kesihatan Pekerjaan, Act 514/1994) is the law itself; JKKP (Jabatan Keselamatan dan Kesihatan Pekerjaan, also called DOSH) is the department that enforces it; NIOSH is the separate institute providing training, research and risk-assessment guidance.

10Why does the Produksi Reka Tanda safety module require students to produce documentation of their risk-assessment and risk-management activities rather than only performing the assessment verbally?

A.Written documentation provides a verifiable record that can be reviewed by certifying bodies (Badan Pentauliahan) such as JKKP, AKKP and NIOSH and used for follow-up action

B.Documentation is required only so that students can skip the practical PBS coursework

C.Verbal risk assessment is illegal under Malaysian law and documentation replaces it entirely

D.Documentation is used solely to calculate the signage business's profit margin

Explanation: Content standard 1.2.6 requires students to produce documentation of risk-assessment and risk-management activities referencing certifying bodies (Badan Pentauliahan) such as JKKP, AKKP and NIOSH, giving teachers and assessors a verifiable, reviewable record.

About the SPM Produksi Reka Tanda Exam

SPM Produksi Reka Tanda (subject code 7405) is a KSSM Mata Pelajaran Vokasional (MPV) elective in the STEM elective group, sat by Form 4 and Form 5 students in mainstream secondary schools. The subject was previously listed under the name Seni Reka Tanda on some older subject lists; the LP/KPM assessment-format specification (approved 21 October 2019, effective from SPM 2021) and current MOE subject naming use Produksi Reka Tanda. Assessment uses two instruments: Kertas 1 (7405/1), a 2-hour Malay-language written theory paper (structured Bahagian A plus open-response Bahagian B, 100 marks, scientific calculator permitted, weighted 40%), and Kertas 2 (7405/2), school-based practical coursework (Kerja Kursus/PBS) assessed continuously against competency rubrics from February Form 4 to July Form 5, weighted 60%. The DSKP organises Form 4–5 content into eight modules: Pengenalan Produksi Reka Tanda (introduction, safety, career prospects), Produksi Grafik (design principles, elements, typography, logos), Reka Letak Berbantukan Komputer (computer-aided layout, visuals, scanning), Papar Tanda (acrylic, router-cut/larik, vinyl and spray-paint signage), Cetakan Digital (heat-press vinyl-transfer and sublimation printing), Papar Tanda Berlampu (LED/lighted signage), Pemasangan Papar Tanda (on-site installation) and Keusahawanan (business ownership, planning, financing and costing). This OpenExamPrep bank is an English-language multiple-choice study adaptation of the knowledge outcomes tested on Kertas 1; it does not replace the Malay written paper or the practical PBS coursework.

Assessment

Kertas 1 (7405/1): Bahagian A (15 compulsory structured items, 60 marks) + Bahagian B (4 compulsory open-response items, 40 marks) = 100 marks, weighted 40% of the final SPM grade; scientific calculator permitted. Kertas 2 (7405/2): school-based coursework (Penilaian Berasaskan Sekolah / PBS) scored against module competency rubrics from February Form 4 through July Form 5, weighted 60%.

Time Limit

Kertas 1 (7405/1): 2 hours (confirmed in the official Lembaga Peperiksaan/KPM Format Pentaksiran Mata Pelajaran Vokasional Produksi Reka Tanda specification, approved 21 October 2019 and effective from SPM 2021).

Passing Score

Kertas 1 marks (40%) are combined with Kerja Kursus/PBS marks (60%) into a single subject grade on the 10-band scale A+ to G; E is the lowest pass (Lulus) and G is a fail (Gagal), with C or above counted as a credit (kepujian). Each PBS module also requires the candidate to reach Kompeten status before its marks count. Grade boundaries are norm-referenced and not published.

Exam Fee

No separate fee for candidates registered through government and government-aided MOE schools; private candidates pay a per-subject registration fee set by Lembaga Peperiksaan Malaysia. (Lembaga Peperiksaan Malaysia (Malaysian Examinations Board), Kementerian Pendidikan Malaysia)

SPM Produksi Reka Tanda Exam Content Outline

10%

Introduction, Safety and Career

Definition and scope of Produksi Reka Tanda, career prospects, workshop occupational safety and health rules and personal protective equipment.

20%

Graphic Design Fundamentals and Computer-Aided Layout

Design principles and elements, typography and logo types, vector vs. raster visuals, image scanning and layout composition.

18%

Acrylic and Router-Cut (Larik) Signage

Acrylic panel construction and vinyl application, plus router/engraving signage tools, criteria and finishing.

18%

Vinyl and Spray-Paint Signage

Vinyl cutting and plotter transfer, vinyl properties, and spray-paint signage image transfer and finishing sequence.

12%

Digital Printing and Heat Press

Heat-press vinyl-transfer and sublimation printing methods, equipment settings and comparative advantages.

14%

Lighted Signage and Installation

LED/lighted signage panel, frame and wiring construction, and on-site installation sequencing.

Entrepreneurship and Costing

Business ownership types, business plans, promotion strategies, financing agencies and signage job costing.

How to Pass the SPM Produksi Reka Tanda Exam

What You Need to Know

Passing score: Kertas 1 marks (40%) are combined with Kerja Kursus/PBS marks (60%) into a single subject grade on the 10-band scale A+ to G; E is the lowest pass (Lulus) and G is a fail (Gagal), with C or above counted as a credit (kepujian). Each PBS module also requires the candidate to reach Kompeten status before its marks count. Grade boundaries are norm-referenced and not published.
Assessment: Kertas 1 (7405/1): Bahagian A (15 compulsory structured items, 60 marks) + Bahagian B (4 compulsory open-response items, 40 marks) = 100 marks, weighted 40% of the final SPM grade; scientific calculator permitted. Kertas 2 (7405/2): school-based coursework (Penilaian Berasaskan Sekolah / PBS) scored against module competency rubrics from February Form 4 through July Form 5, weighted 60%.
Time limit: Kertas 1 (7405/1): 2 hours (confirmed in the official Lembaga Peperiksaan/KPM Format Pentaksiran Mata Pelajaran Vokasional Produksi Reka Tanda specification, approved 21 October 2019 and effective from SPM 2021).
Exam fee: No separate fee for candidates registered through government and government-aided MOE schools; private candidates pay a per-subject registration fee set by Lembaga Peperiksaan Malaysia.

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

SPM Produksi Reka Tanda Study Tips from Top Performers

1Memorise the design principles (harmony, contrast, balance, rhythm, emphasis, unity) and elements (line, shape, space, texture, colour) and practise matching them to labelled example signage.

2Learn the step-by-step sequence for each signage type — acrylic, router-cut (larik), vinyl and spray-paint — since sequencing/ordering items are common in Kertas 1 Bahagian A.

3Compare heat-press vinyl transfer and sublimation printing on temperature, time and suitable materials; know which produces which finish.

4Know the tools, materials and safety gear for each fabrication method (e.g., plotter cutter and transfer tape for vinyl; welding machine and grinder for lighted-signage frames).

5Practise basic signage job costing: material cost + labour cost + overhead/incidental cost, then compute total cost and profit margin for a sample job.

6Remember Kerja Kursus/PBS is scored on Kompeten/Belum Kompeten competency rubrics with safety and workshop-management criteria worth real marks — practise safe tool handling, not just theory.

7Official Kertas 1 still requires Malay structured and open-response answers; use these English MCQs to build concept speed, then practise past Malay papers and hands-on module tasks.

Frequently Asked Questions

What is the format of SPM Produksi Reka Tanda (7405)?

SPM Produksi Reka Tanda combines Kertas 1 (7405/1), a 2-hour written paper with Bahagian A structured items (15 questions, 60 marks) and Bahagian B open-response items (4 questions, 40 marks), weighted 40%, with Kerja Kursus/PBS school-based practical coursework weighted 60%. Kertas 1 is in Malay and a scientific calculator is permitted.

Is this practice bank the same as the official SPM Produksi Reka Tanda exam?

No. Official SPM Produksi Reka Tanda is assessed in Malay through Kertas 1 (structured plus open-response items) and hands-on PBS coursework scored against competency rubrics. This bank is an English-language multiple-choice study adaptation of DSKP knowledge outcomes and does not replace either component.

Is SPM Produksi Reka Tanda the same subject as Seni Reka Tanda?

Yes for practical purposes. Some older subject lists use the name Seni Reka Tanda for this signage-design MPV elective; the current official LP/KPM assessment specification and MOE naming use Produksi Reka Tanda, subject code 7405.

What topics does KSSM Produksi Reka Tanda cover?

The DSKP organises Form 4 and 5 into eight modules: Pengenalan Produksi Reka Tanda (introduction/safety/career), Produksi Grafik (design fundamentals), Reka Letak Berbantukan Komputer (computer-aided layout), Papar Tanda (acrylic, router-cut, vinyl and spray-paint signage), Cetakan Digital (heat-press printing), Papar Tanda Berlampu (lighted signage), Pemasangan Papar Tanda (installation) and Keusahawanan (entrepreneurship and costing).

How is SPM Produksi Reka Tanda graded?

Kertas 1 marks (40% weight) and Kerja Kursus/PBS marks (60% weight) are combined into one subject grade on the 10-band scale A+, A, A-, B+, B, C+, C, D, E and G. E is the lowest pass (Lulus) and G is a fail (Gagal); C and above is a credit (kepujian). Each PBS module also requires the candidate to reach Kompeten status before its marks count toward the final grade.

Who administers SPM Produksi Reka Tanda and when was the format approved?

SPM is administered by Lembaga Peperiksaan Malaysia under Kementerian Pendidikan Malaysia. The Format Pentaksiran for this MPV subject was approved by the Jawatankuasa Kurikulum Kebangsaan on 21 October 2019 and has applied from SPM 2021 onward.

What tools and equipment are used in Produksi Reka Tanda coursework?

PBS modules use signage-production tools and machines such as vinyl plotter cutters, acrylic bending machines, MIG welding equipment, grinders, cordless drills, wire strippers and test pens, alongside computers for computer-aided layout and cutting files.

100+ Free SPM Produksi Reka Tanda Practice Questions

Explore More Malaysia SPM, STPM & MUET Exams

MUET (Malaysian University English Test)

SPM Additional Mathematics (Malaysia)

SPM Akuakultur dan Haiwan Rekreasi (Malaysia)

SPM Al-Adab wa al-Balaghah (Malaysia)

SPM Al-Lughah al-Arabiah al-Mu'asirah (Malaysia)

SPM Al-Syariah (Malaysia)