PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for SPM Lukisan Kejuruteraan

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Malaysia SPM, STPM & MUET Exams

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

MUET (Malaysian University English Test)

Practice Questions

SPM Additional Mathematics (Malaysia)

Practice Questions

SPM Akuakultur dan Haiwan Rekreasi (Malaysia)

Practice Questions

SPM Al-Adab wa al-Balaghah (Malaysia)

Practice Questions

SPM Al-Lughah al-Arabiah al-Mu'asirah (Malaysia)

Practice Questions

SPM Al-Syariah (Malaysia)

Practice Questions
Exam Review

Key Facts: SPM Lukisan Kejuruteraan Exam

SPM Lukisan Kejuruteraan carries subject code 3759 and is a KSSM STEM technical elective administered by Lembaga Peperiksaan Malaysia.

Paper 1 (3759/1) lasts 2 hours 30 minutes on the official Ministry of Education Malaysia SPM 2025 written timetable.

Paper 1 has a fixed structure of 8 questions: Bahagian A (3 questions, 30 marks) and Bahagian B (5 questions, 70 marks), totalling 100 marks and 70% of the subject weight.

Paper 2 (3759/2) is an individual school-based coursework design project worth 30% of the subject, completed in Form 5 from April to June.

All orthographic projections in the official exam are drawn in third-angle projection, and all measurements are given in millimetres.

DSKP Form 4 covers nine modules: introduction, geometry, orthographic projection, auxiliary views, isometric, oblique, perspective, surface development, and introductory CAD.

DSKP Form 5 adds intersection of solids, 2D/3D CAD, and related engineering drawings for mechanical, building, and electrical applications.

This OpenExamPrep bank is an English MCQ study adaptation and does not replace hand-drawn Paper 1 practice or the Paper 2 coursework project.

SPM Lukisan Kejuruteraan (3759) is a Malay-medium KSSM engineering drawing elective with a hand-drawn Paper 1 (3759/1, 2h30m, third-angle projection, 8 construction items) plus a Form 5 coursework project (3759/2). This page offers 100 free English MCQ study items on geometry, orthographic/pictorial drawing, sections, development, and CAD concepts — a knowledge study aid, not a substitute for hand-drawing practice or the coursework project.

Sample SPM Lukisan Kejuruteraan Practice Questions

Try these sample questions to review concepts for the SPM Lukisan Kejuruteraan exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1In engineering drawing line conventions, which line type is used to represent the visible outlines and edges of an object?
A.Short dashed line
B.Thin continuous line
C.Thick continuous line
D.Long-short dash chain line
Explanation: The thick continuous line, often called the object line, is used to show all visible edges and outlines of an object so they stand out clearly from construction and dimension lines.
2Which drawing instrument is primarily used on a drawing board to draw a series of accurate parallel horizontal lines?
A.Compass
B.T-square
C.French curve
D.Protractor
Explanation: A T-square slides along the edge of the drawing board, allowing the draughtsman to draw a series of parallel horizontal lines quickly and accurately. It is also used with a set square to produce vertical and angled lines.
3In a standard orthographic drawing, a series of short, evenly spaced dashes is used to represent:
A.The center of a circle or an axis of symmetry
B.An edge or surface that is hidden from view in that projection
C.A dimension measurement
D.The cutting plane of a section
Explanation: Short, evenly spaced dashes form the hidden line, used to show edges or surfaces that exist on the object but are not directly visible from the viewing direction shown in that particular view.
4The line style made of alternating long and short dashes is conventionally used in engineering drawing to indicate:
A.Hidden edges of the object
B.Centers of circles and axes of symmetry
C.The main visible outline of the object
D.Construction lines used only during drawing
Explanation: The long-short dash (chain) line marks centers of circles, arcs, and axes of symmetry, helping the reader locate the middle of a feature or the line about which a part is symmetrical.
5A component's actual length is 240 mm. If the drawing is produced at a scale of 1:2, what length should be measured and drawn on the paper?
A.480 mm
B.240 mm
C.120 mm
D.60 mm
Explanation: A scale of 1:2 means every 1 unit on the drawing represents 2 units on the real object, so the drawn length equals the actual length divided by 2: 240 mm ÷ 2 = 120 mm.
6According to the official SPM Lukisan Kejuruteraan assessment format, Kertas 1 answers are drawn on a drawing board sized for which standard paper size?
A.A4
B.A3
C.A2
D.A1
Explanation: The official assessment format for Lukisan Kejuruteraan (3759) specifies an A3 drawing board as standard equipment for Kertas 1, and A3 sheets are also used for the Kertas 2 coursework submission.
7The official Kertas 1 instructions state that 'semua ukuran dalam milimeter' (all measurements are in millimetres) as a general note on the paper. Given this instruction, what does an efficient drawing convention allow a candidate to do?
A.Repeat the 'mm' unit label next to every single dimension figure on the drawing
B.Omit the 'mm' unit label next to individual dimension figures, since the general note already states the unit for the whole drawing
C.Use a mixture of millimetres and centimetres depending on the feature size
D.Convert every dimension into inches before drawing
Explanation: When a drawing or exam paper carries a general note stating the unit for all dimensions (here, millimetres), individual dimension figures do not need to repeat the unit label, since it has already been established once for the entire drawing.
8A component drawing is labelled with a scale of 5:1. What does this scale indicate about the drawing compared with the actual object?
A.The drawing is 5 times smaller than the actual object
B.The drawing is 5 times larger than the actual object
C.The drawing and the actual object are the same size
D.The drawing shows only one-fifth of the object's features
Explanation: In a scale ratio written as drawing-size : actual-size, 5:1 means 5 units on the drawing represent 1 unit on the real object, so the drawing is an enlargement, five times larger than the actual object. This convention is commonly used for very small components that need to be shown with enough detail.
9To bisect a straight line AB using only a compass and straightedge, what is the correct first step?
A.Draw an arc from point A only, using any convenient radius
B.Draw arcs of equal radius (greater than half of AB) from both A and B so they intersect above and below the line
C.Measure the exact midpoint using a ruler and mark it directly
D.Draw a circle with AB as its diameter
Explanation: To bisect a line geometrically, equal-radius arcs (each greater than half the line's length) are struck from both endpoints A and B. The two points where these arcs intersect, above and below the line, are joined to form the perpendicular bisector, which crosses AB at its exact midpoint.
10What is the sum of the interior angles of a regular hexagon?
A.360°
B.540°
C.720°
D.900°
Explanation: The sum of interior angles of any polygon is given by (n − 2) × 180°. For a hexagon, n = 6, so the sum is (6 − 2) × 180° = 4 × 180° = 720°.

About the SPM Lukisan Kejuruteraan Exam

SPM Lukisan Kejuruteraan (subject code 3759) is a KSSM STEM technical elective (Mata Pelajaran Elektif Teknikal) sat at the end of Form 5, most commonly offered at Sekolah Menengah Teknik. The official Ministry of Education Malaysia SPM 2025 timetable lists Paper 1 (3759/1) for 2 hours 30 minutes. Per Lembaga Peperiksaan's official assessment format document (Format Pentaksiran, effective SPM 2021), Paper 1 is a hand-drawn instrument paper split into Bahagian A (3 plane-geometry questions, 30 marks) and Bahagian B (5 questions on solid geometry and related drawings, 70 marks), all completed using third-angle projection and measured in millimetres with a compass, T-square, set square, and French curve. Paper 2 (3759/2) is a separate individual coursework design project completed in Form 5 (April to June), submitted as a printed A3 drawing plus a CD-RW softcopy. DSKP content spans nine Form 4 modules — introduction, geometry, orthographic projection, auxiliary views, isometric drawing, oblique drawing, perspective drawing, surface development, and introductory computer-aided drawing (CAD) — followed by Form 5 modules covering intersection of solids, 2D and 3D CAD, and related engineering drawings for mechanical, building, and electrical applications. This OpenExamPrep bank is an English-language multiple-choice study adaptation of the knowledge, standards, and spatial-reasoning skills behind these modules; it does not replace hand-drawn Paper 1 construction practice or the Paper 2 coursework project.

Exam sponsor: Lembaga Peperiksaan Malaysia (Malaysian Examinations Board), Kementerian Pendidikan Malaysia. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Paper 1 (3759/1): written drawing paper, 2 hours 30 minutes, 70% weight. Bahagian A (respon terhad, geometri satah): 3 questions, answer all, 30 marks. Bahagian B (respon terhad, geometri bongkah dan lukisan berkaitan): 5 questions, answer all, 70 marks, covering orthographic projection, auxiliary views, isometric, oblique, perspective, surface development, and intersection of solids. All orthographic views use third-angle projection; all measurements are in millimetres; drawing tools required include an A3 drawing board, T-square, set square, French curve, and compass. Paper 2 (3759/2): individual school-based coursework design project, 100 marks, 30% weight, completed in Form 5 between April and June, submitted as a printed A3 hardcopy plus a CD-RW softcopy.

Time Limit

Paper 1 (3759/1): 2 hours 30 minutes (confirmed on the MOE SPM 2025 written examination timetable for 3759/1). Paper 2 (3759/2): school-based coursework completed across Form 5 April to June.

Passing Score

Single subject grade on the A+ to G scale; E is the lowest pass (Lulus) and G is a fail (Gagal), and C or above is a credit (kepujian). Boundaries are norm-referenced and not published as a fixed percentage.

Exam / Certification Fees

No separate fee for candidates registered through government and government-aided schools; private candidates pay a per-subject registration fee set by Lembaga Peperiksaan Malaysia.

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

8%

Drawing Standards and Equipment

Line conventions, drawing instruments, sheet sizes, scale, and general title-block standards.

18%

Geometric Construction

Bisecting lines/angles, regular polygons, tangency, templates, ellipse construction, loci, and enlargement/reduction by ratio.

20%

Orthographic Projection and Auxiliary Views

Third-angle multiview projection, view alignment, hidden details, and auxiliary views for inclined surfaces.

16%

Pictorial Drawing

Isometric, oblique (cabinet and cavalier), and one-/two-point perspective drawing conventions.

12%

Sections and Dimensioning

Full and half sectional views, hatching, and the unidirectional and aligned dimensioning systems.

14%

Surface Development and Intersection of Solids

Parallel-line and radial-line development of prisms, cylinders, pyramids, and cones, and locating lines of intersection between solids.

12%

CAD Concepts and Related Engineering Drawings

Computer-aided drawing fundamentals and Form 5 mechanical, building, and electrical related-drawing categories.

Preparing for the SPM Lukisan Kejuruteraan Exam

What You Need to Know

  • Passing score: Single subject grade on the A+ to G scale; E is the lowest pass (Lulus) and G is a fail (Gagal), and C or above is a credit (kepujian). Boundaries are norm-referenced and not published as a fixed percentage.
  • Assessment: Paper 1 (3759/1): written drawing paper, 2 hours 30 minutes, 70% weight. Bahagian A (respon terhad, geometri satah): 3 questions, answer all, 30 marks. Bahagian B (respon terhad, geometri bongkah dan lukisan berkaitan): 5 questions, answer all, 70 marks, covering orthographic projection, auxiliary views, isometric, oblique, perspective, surface development, and intersection of solids. All orthographic views use third-angle projection; all measurements are in millimetres; drawing tools required include an A3 drawing board, T-square, set square, French curve, and compass. Paper 2 (3759/2): individual school-based coursework design project, 100 marks, 30% weight, completed in Form 5 between April and June, submitted as a printed A3 hardcopy plus a CD-RW softcopy.
  • Time limit: Paper 1 (3759/1): 2 hours 30 minutes (confirmed on the MOE SPM 2025 written examination timetable for 3759/1). Paper 2 (3759/2): school-based coursework completed across Form 5 April to June.
  • Exam / certification fees: No separate fee for candidates registered through government and government-aided schools; private candidates pay a per-subject registration fee set by Lembaga Peperiksaan Malaysia. Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

SPM Lukisan Kejuruteraan: Suggested Study Strategy

1Master the basic geometric constructions first (bisecting lines/angles, regular polygons, tangency, enlargement/reduction by side or area ratio) since these anchor Bahagian A and recur throughout Bahagian B.
2Practise third-angle projection view placement until it is automatic: top view above the front view, right side view to the right of the front view, with width shared between front/top and height shared between front/side.
3Drill auxiliary views by first identifying the standard view where the inclined surface appears as an edge (a line), then projecting perpendicular to that edge to find true shape.
4Memorise the oblique drawing rule: cabinet halves the receding depth, cavalier keeps it full length; and the isometric rule: three axes at 120°, receding axes at 30° above horizontal.
5Practise surface development calculations (circumference = π × diameter for cylinders; sector radius = slant height and sector angle = (base radius ÷ slant height) × 360° for cones) alongside the drawing technique itself.
6Know both dimensioning systems by name and rule: sistem ekaarah (unidirectional, all figures horizontal) versus sistem terjajar (aligned, figures parallel to their dimension lines).
7Remember that official Paper 1 still requires hand-drawn Malay-medium construction answers with real drawing instruments; use these English MCQs for concept speed, then practise past papers with a T-square, set square, and compass.

Frequently Asked Questions

What is the SPM subject code and paper format for Lukisan Kejuruteraan?

The subject code is 3759. Paper 1 (3759/1) is a hand-drawn written paper lasting 2 hours 30 minutes, split into Bahagian A (3 plane-geometry questions, 30 marks) and Bahagian B (5 questions on solid geometry and related drawings, 70 marks), weighted 70% of the subject. Paper 2 (3759/2) is a school-based coursework design project weighted 30%, completed in Form 5 between April and June.

Is this practice bank the same as the official SPM Lukisan Kejuruteraan exam?

No. The official Paper 1 requires candidates to physically draw geometric constructions and engineering views using instruments such as a compass, T-square, and set square, and Paper 2 is a hands-on coursework project. This bank is an English-language multiple-choice study adaptation of the underlying knowledge and judgment; it cannot certify hand-drawing skill and does not replace Paper 1 construction practice or the Paper 2 project.

What topics does KSSM Lukisan Kejuruteraan cover?

Form 4 covers introduction, geometry, orthographic projection, auxiliary views, isometric drawing, oblique drawing, perspective drawing, surface development (pengorakan), and introductory CAD. Form 5 adds intersection of solids (persilangan), 2D and 3D CAD, and related engineering drawings for mechanical, building, and electrical applications, alongside the Paper 2 coursework project.

Which projection system does SPM Lukisan Kejuruteraan use?

All orthographic projections on the official Paper 1 (3759/1) are drawn in third-angle projection, as explicitly stated in the exam paper's instructions to candidates.

How is SPM Lukisan Kejuruteraan graded?

Each SPM subject is reported as a single grade on the 10-band scale A+, A, A-, B+, B, C+, C, D, E and G. Grade E is the lowest pass (Lulus) and G is a fail (Gagal); C and above is a credit (kepujian). Boundaries are norm-referenced and not published.

Was Lukisan Kejuruteraan on the SPM 2025 timetable?

Yes. The Ministry of Education Malaysia Jadual Waktu Peperiksaan SPM 2025 lists Lukisan Kejuruteraan Kertas 1 under code 3759/1 with a duration of 2 hours 30 minutes.

Who administers SPM Lukisan Kejuruteraan?

SPM is administered by Lembaga Peperiksaan Malaysia under Kementerian Pendidikan Malaysia (the Ministry of Education). Candidates sit at MOE-registered schools and approved centres, most commonly Sekolah Menengah Teknik offering technical elective subjects.