According to the 2024 IPC, what is the minimum horizontal distance required between a water supply well and a septic tank?
Plumber Code General
Question · Easy
How to Become a Plumber in 2026: License, Salary by State & Career Path
Complete 2026 guide to becoming a plumber. Covers apprenticeship requirements, journeyman and master licensing, BLS May 2025 median pay of $63,800, specializations, and career advancement. Free plumber exam prep included.
Blog
Under both the IPC and UPC, what is the maximum static water pressure permitted in a building water distribution system before a pressure-reducing valve must be installed?
Question · Medium
Material that, together with flux, may contain no more than 0.2 percent of a toxic metal under federal law.
Administration and general regulations
Guess the Term
What does the IPC require for the minimum slope of a 4-inch horizontal drainage pipe?
Read the clue and guess the term in 6 tries.
Game
A master plumber is reviewing plans for a multi-story building. According to the IPC, where must accessible plumbing fixtures be provided?
Plastic piping material whose primed solvent-cement joints use an orange cement conforming to ASTM F493.
Water supply and distribution
What is the purpose of an air gap in a plumbing system according to code requirements?
Under the 2024 IPC, what is the minimum required size for a building drain serving a single-family dwelling?
Rating used to size a soil or waste pipe, based on a plumbing product's probable discharge.
Sanitary drainage
According to plumbing code, what is the maximum temperature for hot water delivered to public lavatories to prevent scalding?
Swap tiles to line up three of the same term.
Term Match
A master plumber must determine the required size for a vent stack serving a 10-story building. Which factor is MOST critical in this calculation?
Question · Hard
Kind of pipe that conveys sewage containing fecal matter to a building drain or building sewer.
What is the minimum burial depth for a building sewer installed outside the building in a climate zone where the frost line is 30 inches?
Under the IPC, which of the following materials is NOT approved for use in a drainage system?
Pipe or pipes that provide airflow to or from a drainage system and protect trap seals from siphonage and backpressure.
Drainage airway
What is the minimum diameter for a vertical soil stack serving a water closet?
Plumber Dwv Systems
Flip two cards at a time to find matching terms.
Term Pairs
According to the IPC, what is the maximum allowable length for a 2-inch fixture branch without a cleanout?
___ vent: a vent pipe that also carries drainage from fixtures.
What is the primary purpose of a trap primer?
Under IPC Table 709.1, how many drainage fixture units (DFU) does a PUBLIC water closet (1.6 gpf) represent?
Device or fitting that holds water as a barrier against sewer gas without materially slowing the flow.
Odor control and separation
A master plumber is designing the venting for a bathroom group. What is the minimum size for a wet vent serving a water closet, lavatory, and bathtub?
Find five hidden terms in a grid of letters.
Term Search
What is the minimum horizontal distance required between a water closet flange and an adjacent sidewall?
Liquid barrier in a trap whose depth is measured between the weir and the top of the dip.
According to the IPC, what is the maximum number of drainage fixture units that can be served by a 3-inch horizontal fixture branch?
What type of fitting is required when changing direction in a drainage pipe at a 90-degree angle?
Exterior pipe that carries storm water from roof or gutter drains to an approved disposal point.
Storm drainage
Under the IPC, what is the maximum developed length permitted for a 1-1/2 inch trap arm (lavatory drain) from the trap weir to the vent?
Trades Exam Prep Podcast
Listen on Spotify
Podcast
What is the minimum depth of the water seal required for a fixture trap?
Metal that federal law limits to a weighted average of 0.25 percent across the wetted surfaces of pipes, fittings and fixtures.
A building drain must pass through a foundation wall. What is the code-compliant method for this installation?
What is the primary disadvantage of an S-trap compared to a P-trap?
Pair of bends that shifts a pipe sideways and leaves the new section parallel to the old one.
According to the IPC, what is the minimum size for a building sewer pipe serving a single-family dwelling?
A master plumber needs to connect a new 4-inch drain to an existing 6-inch building drain. What fitting should be used?
___-in: the drainage, water supply and vent piping and fixture supports put in place before fixtures are set.
What is the maximum horizontal distance between a vent terminal and a building opening (window or door) per the IPC?
What is the minimum size water service line required for a single-family dwelling with one full bathroom?
Plumber Water Supply
Any piping other than a riser, main or stack.
According to the IPC, when is a pressure reducing valve required on a water distribution system?
What device is required when installing a backflow preventer on a water service line to protect against thermal expansion?
Watertight receptacle required beneath a storage water heater in places such as an attic where a leak would cause damage.
Plumbing fixtures
Loading more…