Food Safety Policies and Training
20%of exam
Food Safety Assessment
33.33%of exam
Establishment Plan Review
11.67%of exam
Foodborne Illness Investigation
15.00%of exam
Recall Activities
6.67%of exam
Food Defense Practices
6.67%of exam
Emergency Response
6.67%of exam
Quick Facts
- Exam owner
- National Environmental Health Association
- Credential
- Certified Professional – Food Safety
- Format
- 140 multiple-choice questions
- Item split
- 120 scored, 20 unscored
- Time limit
- 2 hours 30 minutes
- Passing score
- 650 scaled (range 0–900)
- Blueprint effective
- June 1, 2025
- NEHA course reference
- 2022 FDA Food Code + Supplement
- Retail rules here
- FDA model code, 2022 edition
- Retail enforcement
- Follow locally adopted rules
HACCP Sequence
Hazards, Points, Limits, Monitor, Correct, Verify, Record
Monitoring vs Verification
Monitoring
- Routine CCP measurements
- Detect a critical-limit deviation
Verification
- Review CCP records
- Check whether plan is followed
- Includes validation of control capability
Measure controls, then verify implementation
Five Retail Risk Factors
- Unsafe source
- Verify approved suppliers
- Undercooking
- Check internal time and temperature
- Improper holding
- Check hot and cold limits
- Contaminated equipment
- Clean, rinse, sanitize
- Poor personal hygiene
- Train and monitor food handlers
Foodborne Illness Examples
- Norovirus
- Infected food handlers can spread
- Hepatitis A
- Report diagnosis to person in charge
- Nontyphoidal Salmonella
- Associated with poultry and eggs
- Shiga toxin-producing E. coli
- Undercooked ground beef is one source
- Listeria monocytogenes
- Ready-to-eat deli meats are one source
- Staphylococcal food poisoning
- Illness from preformed toxin
Management Programs
- Active managerial control
- Build controls into daily work
- Good retail practices
- Foundational retail operating controls
- Good manufacturing practices
- Foundational manufacturing operating controls
- Standard operating procedure
- Written steps for routine tasks
- Sanitation standard operating procedure
- Written cleaning and sanitation steps
- Integrated pest management
- Exclude, monitor, correct pest conditions
- Skills training
- Demonstrate tasks and observe performance
- Root cause analysis
- Identify causes and prevent recurrence
Seven HACCP Principles
- HACCP
- Hazard Analysis + Critical Control Point
- 1 Hazard analysis
- Identify significant food safety hazards
- 2 Critical control points
- Steps essential for hazard controlCCPs
- 3 Critical limits
- Set measurable control boundaries
- 4 Monitoring
- Schedule checks at each CCP
- 5 Corrective actions
- Restore control, address affected food
- 6 Verification
- Check plan validity and implementation
- 7 Recordkeeping
- Log results, deviations, and actions
Cooked TCS Cooling Clock
Two to seventy, six total to forty-one
Time Without Temperature Control
Standard 4-hour option
- Start ≤41°F or ≥135°F
- Mark four-hour deadline
- Cook/serve or discard by deadline
6-hour cold option
- Start ≤41°F, stay ≤70°F
- Mark start and six-hour deadline
- Cook/serve or discard by deadline
- Discard if food exceeds 70°F
Written procedures, discard unmarked food
Temperature Control Decisions
- Cooling a large batch→Divide into shallow pans
- Cooling from room-temperature ingredients→Reach ≤41°F within 4h
- Cooked and cooled for hot holding→Reheat to 165°F for 15s(Standard on-site reheating rule)
- Qualifying packaged commercial RTE TCS→Reheat to ≥135°F for holding(From inspected food plant)
- Mixing dated RTE TCS ingredients→Retain oldest ingredient date
- Missing required date mark→Discard the food
Retail Cooking and Reheating
- Fish, intact meat, eggs to order
- 145°F for 15 secondsStandard
- Ground meat, eggs for holding
- 155°F for 17 secondsOne option
- Poultry and stuffed animal foods
- 165°F instantaneous
- Whole meat roasts
- Use roast time-temperature table
- Plant foods cooked for holding
- 135°F minimum
- Cooked and cooled, reheated for holding
- 165°F for 15 secondsStandard
- Packaged commercial RTE TCS reheating
- 135°F for hot holding
- Reheating for hot holding
- Up to 2 hours41°F to required temperature
Cleaning vs Sanitizing
Cleaning
- Removes food and soil
- Wash, then rinse
Sanitizing
- Reduces microbes on cleaned surfaces
- Use proper strength and contact time
Clean food-contact surfaces before sanitizing
Employee Health Decisions
- Infectious vomiting or diarrhea→Exclude the food employee
- Acute sore throat with fever→Restrict at general-population sites
- Same symptoms at susceptible-population site→Exclude(Highly susceptible population)
- Listed infection diagnosed→Notify the regulatory authority(Apply diagnosis-specific work limits)
- Excluded employee requests return→Check reinstatement criteria(Check diagnosis and service population)
Holding, Cooling, and Date Marking
- TCS food
- Time/temperature control for safety
- RTE food
- Ready to eat
- Standard hot holding
- ≥135°F
- Standard cold holding
- ≤41°F
- Cooked TCS cooling first stage
- 135°F to 70°F within 2h
- Cooked TCS full cooling
- 135°F to ≤41°F within 6h
- TCS prepared from ambient ingredients
- To ≤41°F within 4h
- Refrigerated RTE TCS held >24h
- Date mark, max 7d at ≤41°F
- Date marking day one
- Preparation or original opening day
- Combined dated ingredients
- Keep earliest date mark
Exclusion vs Restriction
Exclude
- Bar work and entry as employee
- Infectious vomiting or diarrhea
Restrict
- Allow duties without contamination risk
- Avoid exposed food and clean equipment
Check symptom, diagnosis, and population
Receiving and Storage
- Refrigerated TCS receiving
- Normally ≤41°F
- Raw shell eggs at receiving
- Equipment ambient air ≤45°F
- Damaged packaging
- Reject if integrity is compromised
- Shellfish identification records
- 90 days after last sale/service
- Raw animal food
- Separate from ready-to-eat food
- Cleaning chemicals
- Store away from food
Employee Health and Hygiene
- Employee reporting
- Symptoms, diagnoses, specified exposures
- Who receives employee reports
- Person in charge (PIC)
- Vomiting or diarrhea
- Exclude unless noninfectious
- Jaundice or listed diagnosis
- PIC notifies regulatory authority
- Return to work
- Follow diagnosis-specific reinstatement criteria
- Handwashing procedure
- At least 20 seconds total
- Single-use food gloves
- One task, discard when interrupted
- Standard ready-to-eat handling
- Use utensils or gloves
- Vomiting or diarrheal event
- Follow written cleanup and disinfection procedures
Allergen Controls
- Major allergens 1–3
- Milk, eggs, fish
- Major allergens 4–6
- Crustacean shellfish, tree nuts, peanuts
- Major allergens 7–9
- Wheat, soybeans, sesame
- Cross-contact
- Unintended transfer of allergenic protein
- Shared equipment
- Clean to remove allergen residues
- Ingredient substitution
- Recheck ingredients and allergen information
- Allergy request
- Verify ingredients with kitchen staff
Risk-Based Inspection
- Before inspection
- Review history and calibrate instruments
- During inspection
- Observe practices and measure temperatures
- Priority (P)
- Direct control of health hazards
- Priority foundation (Pf)
- Supports a priority control
- Core
- General operations and maintenance
- Out-of-control risk factor
- Seek correction during inspection
- Regulator-approved extensions
- P ≤72h, Pf ≤10 calendar days
- Follow-up
- Verify and document required corrections
- Chemical sanitizer strength
- Measure with appropriate test kit
Variance vs HACCP Plan
Variance
- Regulator grants specified modification
- Approval before applicable specialized process
HACCP plan
- Documents process hazard controls
- Specifies limits, checks, and actions
Some processes need both approvals
Plan Review Decisions
- New construction or conversion→Submit plans before work
- Menu or process changes→Check plan submission requirements(Consult regulatory authority)
- Smoking for food preservation→Obtain variance and HACCP approval(Before starting process)
- Reduced oxygen packaging proposed→Check variance and HACCP requirements(Food Code §§ 3-502.11–12)
- Plans approved, construction complete→Verify installation before opening
Plan Submittal
- Proposed menu
- Identify processes and special approvals
- Peak volume
- Size storage and equipment capacity
- Scaled floor plan
- Locate equipment, sinks, and utilities
- Equipment specifications
- Model, capacity, installation requirements
- Finish schedule
- Check cleanability by room use
- Preopening inspection
- Compare construction with approved plans
Plumbing, Layout, and Surfaces
- Food flow
- Separate raw and ready-to-eat paths
- Handwashing sinks
- Convenient to prep and warewashing
- Warewashing
- Allow wash, rinse, sanitize, air-dry
- Hot water system
- Size for peak demand
- Water supply inlet air gap
- ≥2× inlet diameter, minimum 1 inch
- Wet-area surfaces
- Smooth, durable, easily cleanable, nonabsorbent
Three Lines of Evidence
People, product path, test results
Cohort vs Case-Control
Cohort
- Known population at risk
- Compare illness by exposure group
- Preferred measure is risk ratio
Case-control
- Sample cases and controls
- Compare odds of exposure
- Preferred measure is odds ratio
Start with how subjects entered
Outbreak Investigation Decisions
- Multiple reports suggest common exposure→Notify public health, coordinate investigation
- Need to define who counts→Set and apply case definition
- Known group of event attendees→Consider retrospective cohort study
- Cases and comparable noncases available→Consider case-control study
- Suspected food linked by interviews→Coordinate traceback and targeted sampling
- Source still under investigation→Apply warranted control measures
Outbreak Evidence
- Initial complaint
- Record symptoms, onset, foods, contacts
- Case definition
- Set clinical, time, place criteria
- Line list
- One row per case
- Epidemic curve
- Plot cases by onset time
- Attack rate
- New cases ÷ population at risk
- Risk ratio
- Exposed ÷ unexposed attack rates
- Odds ratio
- Cases’ exposure odds ÷ controls’ odds
- Exposure history window
- Match suspected incubation period
Traceback vs Traceforward
Traceback
- Work toward suppliers and source
- Use lot and receiving records
Traceforward
- Work toward recipients and destinations
- Use lot and shipping records
Find source and affected destinations
Recall Decisions
- Test recall readiness→Run a mock recall
- Affected lot identified→Stop sale and segregate stock
- Lot entered distribution→Notify consignees and coordinate recall
- Notice already sent→Verify receipt and action
- Affected units recovered→Document disposition and reconcile quantities
FDA Recall Classes
- Class I
- Reasonably probable serious harm or death
- Class II
- Temporary or medically reversible harm
- Class II alternative
- Remote chance of serious harm
- Class III
- Adverse health effects unlikely
Recall Records
- Product identifiers
- Name, size, lot, date codes
- Distribution records
- Identify direct consignees and quantities
- Recall notice
- Identify product and required actions
- Effectiveness checks
- Verify receipt and appropriate action
- Quantity reconciliation
- Account for distributed affected product
- Disposition records
- Document final handling of product
FDA ALERT
Assure, Look, Employees, Reports, Threat
Food Safety vs Food Defense
Food safety
- Controls unintended hazards
- Examples include HACCP and sanitation
Food defense
- Prevents intentional adulteration
- Examples include access control, reporting
Match controls to the hazard
Food Defense Response
- Visitor requires access→Check identity and authorization
- Suspected product tampering→Hold product and alert management
- Credible food defense concern→Contact appropriate authorities(Follow site reporting plan)
- After drill or incident→Review response and correct gaps
Food Defense Controls
- Written defense plan
- Assign response and reporting roles
- Access control
- Limit entry to authorized people
- Visitor management
- Identify visitors and supervise access
- Employee training
- Recognize and report suspected tampering
- Defense drill
- Rehearse responsibilities and reporting
- Post-event review
- Document lessons and corrective actions
Shutdown vs Limited Operation
Shutdown
- Imminent hazard may exist
- Notify the regulatory authority
- Approval needed to resume
Limited operation
- Unaffected areas may continue
- Extended utility outage requires conditions
- Confirm approved plan with regulator
Assess affected areas and services
Emergency Decisions
- Imminent hazard may exist→Stop affected operations, notify regulator
- Part of site unaffected→Evaluate continued use there
- Extended power or water interruption→Consult regulator before continuing(Approved written plan and controls)
- Floodwater reached food storage→Segregate exposed stock(Assess with regulatory authority)
- Emergency closure, hazards corrected→Request approval to reopen
Emergency Controls
- Response lead
- Activate plan and assign roles
- Imminent health hazard
- Stop affected operations and notify regulator
- Suspect food
- Segregate pending safe disposition
- Power loss
- Document time and food temperatures
- Water interruption
- Verify a safe approved water source
- Sewage backup
- Prevent use of affected areas
Reopening Checks
- Utilities
- Verify safe water and sewage
- Refrigeration
- Confirm safe holding capacity
- Flood-exposed food
- Assess, segregate, document disposition
- Food-contact surfaces
- Clean and sanitize before reuse
- Person in charge
- Complete a reopening self-inspection
- After required closure
- Obtain regulator approval before reopening
Common Traps
Scaled score and raw results
650 scaled passing score ≠ Raw percent correct
Validation and routine checks
Validation establishes control capability ≠ Monitoring checks a CCP routinely
Two cooling deadlines
Six total hours from 135°F ≠ Six more hours after 70°F
Allergens and pathogens
Cross-contact transfers allergenic protein ≠ Cross-contamination can transfer pathogens
Approved variance and permit
Variance modifies specified code requirement ≠ Permit authorizes establishment operation
Evidence and inference
Epi curve describes onset pattern ≠ Source confirmation combines evidence streams
Recall classification and reach
Recall class describes health hazard ≠ Recall depth defines distribution reach
Restoration and reopening
Power restoration returns electricity ≠ Regulatory approval authorizes reopening
Last Minute
- 1.650 is the scaled passing score
- 2.Critical limits set CCP boundaries
- 3.Cooling cooked TCS ≤41°F/6h total
- 4.Standard holding ≥135°F hot, ≤41°F cold
- 5.Poultry cooks to 165°F instantaneous
- 6.Exclude for infectious vomiting or diarrhea
- 7.Sesame is a major allergen
- 8.Water inlet gap ≥2× diameter, ≥1in
- 9.Cohort compares risks across exposures
- 10.Recall checks verify notice and action
- 11.Food defense addresses intentional adulteration
- 12.Required closure needs reopening approval
Third-party resources · We may earn a commission from purchases.

CP-FS Exam Prep: The Complete Certified Professional Food Safety Study Guide with 600 Practice Questions, 5 Full-Length Exams, HACCP Review, Case Studies, and Proven Strategies for Exam Success
By Publishing, PrepSmart
$49.99 · Buy on Amazon
Explore More NEHA Food Safety Certifications
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.