11.4 Full Mixed-Module Mock Review & Final Checklist
Key Takeaways
Rehearse the full, mixed-module experience at least once in your final week, since single-module drills do not test the mental switching cost between modules that test day requires.
Score every mock module separately against your agency's confirmed cut score rather than only an overall average, especially under a conjunctive scoring model.
Follow a structured final-week countdown: mock, targeted re-drill, logistics confirmation, a second mock, and light review only the day before.
Reserve remaining prep hours for any module still below its cut score two days out instead of further polishing an already-passing module.
A passing CritiCall score advances a candidate to the next hiring step, not to a job offer — background, psychological, and interview stages typically follow.
Why a Single-Module Drill Isn't Enough
Every chapter in this guide, and most practice tools, let you drill one module at a time — useful for building a specific skill, but it does not resemble the actual test. CritiCall test day presents your confirmed module roster back-to-back, often in a fixed order set by the agency, with no break to mentally "reset" between, say, a map-reading section and a data-entry section. A candidate who performs well on each module in isolation can still underperform on test day if they have never practiced the mental switching cost of moving directly from a timed audio call-summarization module into a cross-referencing lookup task. This final section walks through how to rehearse the full, mixed-module experience and provides a last-mile checklist to close out your preparation.
Running a Full Mixed-Module Mock
Using the module roster and passing scores you confirmed in section 11.1, assemble a single timed session that strings together practice items from every confirmed module, in whatever order your agency has indicated, or, if unknown, roughly the order many agencies use: audio and multitasking items first, then data entry, then the more self-paced modules such as map reading, cross-referencing, and reading. Time the entire session as one continuous block rather than pausing between modules, and do not allow yourself a phone or bathroom break mid-session — the real test will not offer one either. Score each module separately against the cut score your agency gave you, not just an overall average, especially if your agency uses the conjunctive, pass-each-module scoring model discussed in section 11.1.
Run at least one full mixed-module mock during your final week, and ideally two: one mid-week to identify modules that only break down under fatigue or switching cost, even though they looked solid in isolated drills, and a second in the final 48 hours to build confidence and confirm your timing.
Final-Week Countdown
| Timing | Action |
|---|---|
| 7 days out | Run your first full mixed-module mock; log per-module scores against your agency's confirmed cut scores |
| 5 days out | Re-drill only the modules that fell short of the cut score in the mock; leave passing modules to light review |
| 3 days out | Confirm test-day logistics: exact address, arrival and check-in time, required photo identification, and whether personal items such as phones or watches are allowed in the testing room |
| 2 days out | Run a second full mixed-module mock under exam-day time pressure, including the modules you re-drilled |
| 1 day out | Light review only — a fixed-fact refresh of the four decision rules and the CAD field-entry tab order; no new material, and a full night's sleep |
| Day of | Arrive early, bring photo identification, expect a headset- and mouse-based computer station, turn on Num Lock if given the option, and complete every module's practice items even though they are optional |
A Module-by-Module Confidence Self-Check
Before your final mock, rate your confidence from 1 (shaky) to 5 (automatic) on each of the 15 legacy Operational modules this guide covers. Any module scoring 3 or below deserves another look in the chapter listed alongside it:
| # | Module | Chapter | Confidence (1-5) |
|---|---|---|---|
| 1 | Multi-Tasking / Advanced Decision Making | 2 | ___ |
| 2 | Call Summarization 1 (basic) | 3 | ___ |
| 3 | Call Summarization 2 / Vocalization Summary (advanced) | 3 | ___ |
| 4 | Reading Comprehension | 10 | ___ |
| 5 | Sentence Clarity | 10 | ___ |
| 6 | Cross Referencing | 8 | ___ |
| 7 | Frequency of Information / Probability Determination | 5 | ___ |
| 8 | Map Reading / Geographic Directions | 6 | ___ |
| 9 | Memory Recall (Short-Term) | 9 | ___ |
| 10 | Memory Recall (Long-Term) & Inductive Reasoning | 9 | ___ |
| 11 | Numerical Ability | 5 | ___ |
| 12 | Perceptual Ability (Character Comparison) | 8 | ___ |
| 13 | Spelling | 10 | ___ |
| 14 | Computerized Data Entry | 7 | ___ |
| 15 | Typing Speed (WPM) | 7 | ___ |
Mixed-Review Practice
The four questions below are a taste of true mixed-module thinking — each pulls from a different chapter of this guide, the way test day will ask you to shift between skills without a reset.
Final Reminders
- Your composite score, cut scores, and even which of these 15 modules you will face are set entirely by your hiring agency — reconfirm all three in section 11.1 if more than a few weeks have passed since you first checked.
- Typing speed, Num Lock use, and upper-case entry conventions from section 11.2 are pass/fail mechanics, not content you can reason your way past on test day — they need muscle memory built through repetition, not last-minute cleverness.
- If your final mock still shows one module below its cut score two days before testing, spend your remaining hours there rather than polishing a module you have already cleared.
- Passing CritiCall clears the way to the next stage of the hiring process, not the job itself — most agencies still require a background investigation, and often psychological screening, polygraph or drug screening, and an interview panel after a passing score.
Key Takeaways
- Rehearse the full, mixed-module experience at least once in your final week, since single-module drills do not test the mental switching cost between modules that test day requires.
- Score every mock module separately against your agency's confirmed cut score, not just an overall average, if your agency uses a conjunctive scoring model.
- Use the final-week countdown to sequence mocks, targeted re-drilling, logistics confirmation, and rest, ending with light review only on the day before the test.
- Reserve remaining prep time for any module still below its cut score two days out, rather than further polishing modules you have already cleared.
During a full mixed-module mock, a candidate scores 92% on cross-referencing but only 68% on map reading, against an agency cut score of 70% per module. Assuming a conjunctive scoring model, what should the candidate conclude?
The composite average of 80% is enough to pass regardless of the individual module scores.
Map reading currently sits below the required cut score and needs targeted re-drilling regardless of the strong cross-referencing score.
Cross-referencing and map reading will be averaged separately from all other modules on test day.
The mock result has no bearing on hiring since only test-day scores are ever counted.
A candidate is deciding what to review the night before test day. Which is the most appropriate final-night activity based on this guide's final-week countdown?
Attempt a brand-new set of unfamiliar practice questions to test readiness.
Run a third full mixed-module mock to squeeze in extra practice.
Skip review entirely and do something unrelated to CritiCall.
A light, fixed-fact refresh of the decision rules and CAD field-entry order, followed by a full night's sleep.
Which best describes why typing speed deserves disproportionate attention in the final week even though it is a smaller share of the this guide's editorial study allocation?
It commonly functions as an independent pass/fail floor rather than just one weighted contributor to a composite score.
It is always the single largest weighted domain on the CritiCall test.
It replaces the need for a full mixed-module mock entirely.
Agencies never test typing speed separately from the data-entry module.
What is the primary reason to run a full mixed-module mock instead of only drilling one module at a time?
Single-module drills are not something this guide's practice tools support.
Mixed-module mocks are graded on a different scale than the real CritiCall test.
Test day presents confirmed modules back-to-back with no reset break, and the mental switching cost between modules can hurt performance even when each module is strong in isolation.
Mixed-module mocks always take less total time than single-module drills.
Sections you finish are checked off in the contents.
You've completed this section
Continue exploring other exams