100+ Free WY Low Voltage Practice Questions

Pass your Wyoming Low Voltage Contractor exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

What type of security sensor is most appropriate for detecting glass breakage?

PIR motion detector

Acoustic glass break detector

Magnetic door contact

Pressure mat

to track

Same family resources

More Low Voltage Contractor Prep

Continue through related practice pages, study guides, comparisons, and articles from the same exam family.

Practice Pages

Alaska Low Voltage Contractor Practice100 questions Arizona Low Voltage Contractor Practice100 questions California Low Voltage Contractor Practice100 questions Connecticut Low Voltage Contractor Practice100 questions Delaware Low Voltage Contractor Practice100 questions Florida Low Voltage Contractor Practice100 questions

Free Low Voltage Contractor Practice Test by State 2026: 2,800+ Questions25 min read

2026 Statistics

Key Facts: WY Low Voltage Exam

70%

Passing Score

Wyoming Department of Fire Prevention & Electrical Safety

100

Exam Questions

Wyoming Department of Fire Prevention & Electrical Safety

2 hours

Time Limit

Wyoming Department of Fire Prevention & Electrical Safety

100 Q

Practice Questions

OpenExamPrep

Sample WY Low Voltage Practice Questions

Try these sample questions to test your WY Low Voltage exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which Wyoming agency oversees low voltage technician and contractor licensing?

A.Wyoming Game and Fish

B.Department of Fire Prevention and Electrical Safety

C.Wyoming Department of Education

D.Wyoming Secretary of State

Explanation: The Wyoming Department of Fire Prevention and Electrical Safety oversees low voltage technician and contractor licensing. They administer exams, issue licenses, and enforce electrical installation standards.

2What license classifications does Wyoming offer for low voltage work?

A.Only one general license

B.Apprentice, Technician, and Contractor classifications

C.Only a master electrician license

D.No licensing required

Explanation: Wyoming offers three classifications for low voltage work: Apprentice (supervised), Technician (independent installation), and Contractor (business operation and supervision). Each has different requirements.

3Under Wyoming Statutes Title 35, Chapter 9, what defines low voltage work?

A.Any electrical work

B.Work on systems operating at 100 volts or less for communication, signaling, and similar purposes

C.Only telephone work

D.Only fire alarm work

Explanation: Wyoming Statutes Title 35, Chapter 9 defines low voltage work as installation and maintenance of systems operating at 100 volts or less used for communication, signaling, fire alarm, security, and similar purposes.

4How often must a Wyoming low voltage license be renewed?

A.Annually

B.Every 2 years

C.Every 3 years

D.Every 5 years

Explanation: Wyoming low voltage licenses must be renewed every 2 years. Renewal requires completing continuing education hours and paying the applicable renewal fee to the Department.

5What continuing education is required for Wyoming low voltage license renewal?

A.No CE required

B.8 hours per cycle

C.16 hours per renewal cycle

D.40 hours per year

Explanation: Wyoming requires 16 hours of continuing education per 2-year renewal cycle for low voltage licenses. CE must cover relevant codes, standards, and industry practices.

6What experience is required for a Wyoming Low Voltage Technician license?

A.No experience required

B.2 years as a registered apprentice or equivalent experience

C.5 years of experience

D.A college degree

Explanation: Wyoming requires a minimum of 2 years as a registered low voltage apprentice or equivalent documented experience to qualify for the Low Voltage Technician license.

7What additional requirement applies to Wyoming Low Voltage Contractor license beyond technician?

A.No additional requirements

B.Business experience, insurance/bonding, and must employ or be a licensed technician

C.Only a higher exam score

D.Only additional CE hours

Explanation: Wyoming's Low Voltage Contractor license requires business experience, proof of insurance and bonding, and the contractor must either be a licensed technician themselves or employ one. This ensures business competency.

8What is the penalty for performing low voltage work without a license in Wyoming?

A.No penalty

B.Misdemeanor with fines up to $750 per day of violation

C.Only a verbal warning

D.Community service

Explanation: Performing low voltage work without proper licensing in Wyoming is a misdemeanor with fines up to $750 per day of violation. The Department actively enforces licensing requirements through inspections.

9Under Wyoming law, what is the supervision requirement for low voltage apprentices?

A.No supervision needed

B.Direct supervision by a licensed technician or contractor on the job site

C.Phone supervision only

D.Any company employee can supervise

Explanation: Wyoming requires low voltage apprentices to work under the direct supervision of a licensed technician or contractor who is present on the job site. The supervisor-to-apprentice ratio must be maintained.

10What bond is required for a Wyoming Low Voltage Contractor?

A.No bond required

B.A surety bond as specified by the Department

C.Only personal guarantee

D.A $1 million bond

Explanation: Wyoming requires Low Voltage Contractors to post a surety bond as specified by the Department of Fire Prevention and Electrical Safety. The bond amount protects consumers and ensures contractor accountability.

About the WY Low Voltage Exam

The Wyoming low voltage contractor exam covers state-specific licensing requirements under Wyoming Statutes Title 35 Chapter 9, NEC Articles 725, 760, 770, and 800, fire alarm system design and installation (NFPA 72), security system installation, structured cabling standards (TIA-568), and testing/troubleshooting procedures. Limited/Low Voltage Technician/Contractor License through the Department of Fire Prevention and Electrical Safety.

Questions

100 scored questions

Time Limit

2 hours

Passing Score

70%

Exam Fee

Varies (Wyoming Department of Fire Prevention & Electrical Safety)

WY Low Voltage Exam Content Outline

20%

Wyoming State Laws & Licensing

Wyoming low voltage contractor licensing requirements, Wyoming Statutes Title 35 Chapter 9, and state-specific regulations

25%

NEC Codes & Standards

NEC Articles 725, 760, 770, 800 covering remote-control, fire alarm, optical fiber, and communications circuits

20%

Fire Alarm & Security Systems

NFPA 72 fire alarm design, security system installation, detection devices, and notification appliances

20%

Structured Cabling & Telecom

TIA-568 cabling standards, network infrastructure, fiber optics, and telecommunications systems

15%

Testing & Safety

Cable certification, system commissioning, troubleshooting techniques, and workplace safety

How to Pass the WY Low Voltage Exam

What You Need to Know

Passing score: 70%
Exam length: 100 questions
Time limit: 2 hours
Exam fee: Varies

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

WY Low Voltage Study Tips from Top Performers

1Study Wyoming-specific licensing requirements under Wyoming Statutes Title 35 Chapter 9 and the role of the Department of Fire Prevention and Electrical Safety

2Master NEC Article 725 circuit classifications (Class 1, 2, 3) and wiring methods for each class

3Review NFPA 72 for fire alarm system design, detector spacing, NAC circuit requirements, and battery calculations

4Practice TIA-568 structured cabling standards including maximum distances, cable ratings, and testing parameters

5Learn NEC Articles 760, 770, and 800 for fire alarm, fiber optic, and communications cable installation requirements

Frequently Asked Questions

What is the Wyoming low voltage contractor exam?

The Wyoming low voltage contractor exam tests knowledge of state licensing requirements, NEC codes (Articles 725, 760, 770, 800), fire alarm systems, security installations, and structured cabling standards required for Limited/Low Voltage Technician/Contractor License licensure.

Who administers the Wyoming low voltage license?

The Wyoming Department of Fire Prevention & Electrical Safety administers the low voltage contractor licensing program in Wyoming. They handle applications, examinations, and enforcement of licensing requirements.

What NEC articles should I study for the low voltage exam?

Focus on NEC Article 725 (remote-control and power-limited circuits), Article 760 (fire alarm systems), Article 770 (optical fiber cables), and Article 800 (communications circuits). These are the primary NEC articles governing low voltage work.

How often must I renew my Wyoming low voltage license?

Wyoming low voltage licenses must be renewed every 2 years. Renewal requires 16 hours continuing education per renewal cycle and payment of applicable fees.