100+ Free NC Low Voltage Practice Questions
Pass your North Carolina Low Voltage Contractor (SP-LV) exam on the first try — instant access, no signup required.
In NC, who pulls the permit for fire alarm installations?
More Low Voltage Contractor Prep
Continue through related practice pages, study guides, comparisons, and articles from the same exam family.
Key Facts: NC Low Voltage Exam
70%
Passing Score
NCBEEC
2 years
Experience Required
NCBEEC
$60
Application Fee
NCBEEC
2020 NEC
Code Edition
NCBEEC
100 Q
Practice Questions
OpenExamPrep
The NCBEEC SP-LV license requires 2 years experience, character references, and passing an open-book exam with 70% through PSI Exams based on the 2020 NEC.
Sample NC Low Voltage Practice Questions
Try these sample questions to test your NC Low Voltage exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1Which North Carolina board issues the SP-LV (Low Voltage) specialty license?
2How many years of experience are required for the NC SP-LV license examination?
3What is the minimum passing score on the NCBEEC SP-LV licensing exam?
4Which edition of the NEC does North Carolina use for licensing examinations?
5Under NEC Article 725, what are the three classes of remote-control and signaling circuits?
6What NEC article covers fire alarm system installations?
7What cable type is required for power-limited fire alarm circuits in plenum spaces?
8According to NFPA 72, what is the minimum standby battery capacity for a fire alarm system?
9What is the maximum horizontal cable run per TIA-568?
10What must an applicant submit to the NCBEEC as part of the SP-LV license application?
About the NC Low Voltage Exam
The North Carolina SP-LV exam covers low voltage system installation including fire alarm, security, telecommunications, and structured cabling. The NCBEEC administers the open-book exam based on the 2020 NEC.
Questions
100 scored questions
Time Limit
2 hours
Passing Score
70%
Exam Fee
$60 application fee (NC Board of Examiners of Electrical Contractors (NCBEEC) / PSI Exams)
NC Low Voltage Exam Content Outline
NC State Regulations
NCBEEC SP-LV licensing, Alarm Systems Licensing Board, permits, NC Building Code
NEC Codes & Standards
NEC Articles 725, 760, 770, 800, circuit classifications, cable types
Systems & Technology
Fire alarm, security, access control, structured cabling, IP systems
Installation Practices
Wiring methods, terminations, firestopping, cable management
Safety & Testing
OSHA safety, cable certification, NFPA 72 testing, surge protection
How to Pass the NC Low Voltage Exam
What You Need to Know
- Passing score: 70%
- Exam length: 100 questions
- Time limit: 2 hours
- Exam fee: $60 application fee
Keys to Passing
- Complete 500+ practice questions
- Score 80%+ consistently before scheduling
- Focus on highest-weighted sections
- Use our AI tutor for tough concepts
NC Low Voltage Study Tips from Top Performers
Frequently Asked Questions
What is the NC SP-LV license?
The SP-LV (Special Restricted Low Voltage) is a specialty license from the NCBEEC for installing low voltage systems including fire alarm, security, telecom, and structured cabling.
What experience is needed for the SP-LV license?
2 years of experience with at least 1 year primary in low voltage work, plus two character references and application to NCBEEC.
What code book should I study?
The NCBEEC bases exams on the 2020 NEC. The exam is open-book, so bring your 2020 NEC to the test.
Who administers the SP-LV exam?
PSI Exams administers the test. After NCBEEC approves your application, you receive scheduling instructions from PSI.