Free Practice Questions for Washington Low Voltage Practice

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Low Voltage Contractor

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

More From This Family

Videos and articles for deeper review.

VideoFree Low Voltage Contractor Practice Tests by State (2026)ArticleFree Low Voltage Contractor Practice Tests by State (2026)9 min read

Exam Review

Key Facts: Washington Low Voltage Practice Exam

Varies

Official Credential

Washington State Department of Labor & Industries

Not one total

Official Exam Format

Credential-specific bulletin required

100 Q

Practice Questions

OpenExamPrep

Washington does not publish one generic “low voltage contractor” exam matching this route. Use the 100 local questions for diagnostic practice, then confirm the exact credential, legal scope, official item count, time limit, passing standard, fee, and reference list with the responsible authority.

Sample Washington Low Voltage Practice Practice Questions

Try these sample questions to review concepts for the Washington Low Voltage Practice exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which Washington state agency administers the telecommunications contractor license?

A.Department of Commerce

B.Department of Labor & Industries (L&I)

C.Secretary of State

D.Department of Licensing

Explanation: The Washington Department of Labor & Industries (L&I) administers the telecommunications contractor license (06A) through its Electrical Program. L&I handles examinations, licensing, and enforcement.

2Under WAC 296-46B-920, which specialty designation is Washington's Limited Energy System license that covers low voltage telecommunications, fire alarm, and security wiring?

A.(01) General electrical contractor

B.(06) Limited Energy System

C.(06A) HVAC/Refrigeration

D.(04) Signs

Explanation: Under WAC 296-46B-920, the (06) Limited Energy System specialty covers installation of signaling and power-limited circuits including telecommunications, fire protection signaling, security/intrusion alarms, and similar low voltage work. (06A) is HVAC/Refrigeration, and (09) is the separate Telecommunications specialty.

3Under Washington's electrical rules (WAC 296-46B), how is 'low voltage' defined for telecommunications/limited-energy work?

A.Any circuit under 120 volts regardless of class

B.NEC Class 1 power-limited circuits at 30 volts maximum, Class 2/Class 3 circuits, and telecommunications systems per chapter 19.28 RCW

C.Only circuits under 57 volts

D.Only circuits under 24 volts

Explanation: Washington (WAC 296-46B) defines 'low voltage' as NEC Class 1 power-limited circuits at 30 volts maximum, NEC Class 2 and Class 3 circuits, and the circuits of telecommunications systems as defined in chapter 19.28 RCW. It is defined by circuit class and power limitation, not by a single 57-volt threshold.

4How often must a Washington telecommunications contractor license be renewed?

A.Annually

B.Every 2 years

C.Every 3 years

D.Every 5 years

Explanation: Washington telecommunications contractor licenses must be renewed every 3 years. Renewal requires completing continuing education and paying the renewal fee to L&I.

5What continuing education is required for Washington limited energy/telecommunications administrator certificate renewal?

A.No CE required

B.8 hours per year

C.24 hours per renewal cycle

D.48 hours per cycle

Explanation: Washington requires 24 hours of continuing education per 3-year renewal cycle for telecommunications contractor licenses. CE must cover relevant codes and industry standards.

6What bond is required for a Washington telecommunications contractor?

A.No bond required

B.A $4,000 surety bond

C.A $50,000 surety bond

D.A $100,000 surety bond

Explanation: Washington requires telecommunications contractors to post a $4,000 surety bond as part of their licensing requirements. This bond protects consumers and ensures contractor accountability.

7What is the penalty for performing telecommunications work without a license in Washington?

A.No penalty

B.A civil penalty of up to $10,000 per violation

C.Only a verbal warning

D.Automatic 30-day license suspension

Explanation: Under RCW 19.28, performing or advertising telecommunications/electrical work without the required license subjects the violator to a civil monetary penalty of up to $10,000 per violation, assessed by L&I, along with possible stop-work orders. It is enforced administratively as a civil penalty rather than as a criminal misdemeanor.

8Under Washington law, can a homeowner perform their own low voltage work?

A.No, all work requires licensing

B.Yes, homeowners can work on their own residence with certain limitations

C.Only with a temporary permit

D.Only for systems under 12 volts

Explanation: Washington allows homeowners to perform low voltage/telecommunications work on their own single-family residence. However, permits may still be required and the work must comply with applicable codes.

9What insurance is required for a Washington telecommunications contractor?

A.No insurance required

B.General liability insurance and workers compensation (if employees)

C.Only vehicle insurance

D.Only professional liability

Explanation: Washington requires telecommunications contractors to maintain general liability insurance and workers compensation insurance if they have employees. Proof of insurance must be on file with L&I.

10What is the Washington requirement for electrical permits on low voltage work?

A.No permits ever required

B.Permits required for most commercial and some residential low voltage installations

C.Only required for work over $500

D.Permits are optional

Explanation: Washington requires electrical permits for most commercial low voltage installations and certain residential work. Permits are obtained through L&I or local inspection authorities.

About the Washington Low Voltage Practice Exam

This is a state-focused diagnostic practice route for Washington low-voltage and limited-energy concepts, not an official exam with one statewide format. The controlling credential may be a contractor classification, individual technician license, alarm or fire-alarm credential, telecommunications credential, or local registration. Verify the exact scope, regulator, adopted code, and exam bulletin before relying on logistics.

Exam sponsor: Washington State Department of Labor & Industries; other state or local authorities may apply by scope. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

State-focused diagnostic practice; the official assessment structure depends on the exact Washington credential and regulator.

Time Limit

Varies by exact credential and exam provider

Passing Score

Not published as one generic-route percentage; verify the exact credential

Exam / Certification Fees

Varies by exact credential and current fee schedule

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Official sources

Washington State Department of Labor & Industries official page

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.