Career upgrade: Learn practical AI skills for better jobs and higher pay.
Level up
All Practice Exams

100+ Free VA Elevator Mechanic Practice Questions

Pass your Virginia Elevator Mechanic Certification exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
Not Published Pass Rate
100+ Questions
100% Free
1 / 100
Question 1
Score: 0/0

In Virginia, which of the following training programs is accepted as equivalent to state vocational training for elevator mechanic certification?

A
B
C
D
to track
2026 Statistics

Key Facts: VA Elevator Mechanic Exam

90

Questions

VA DPOR / PSI

210 min

Exam Time

VA DPOR / PSI

70%

Passing Score

VA DPOR

$100

Exam Fee

VA DPOR

3 years

Min. Experience

18VAC50-30-43

Open Book

Exam Format

PSI

The Virginia elevator mechanic certification exam is a 90-question, open-book, computer-based test administered by PSI. You have 210 minutes and need a 70% passing score (63 correct). Candidates must have 3 years of practical experience plus 144 hours of vocational training, or hold a CET/NEIEP certificate with 3 years of experience, or complete a VA-approved apprenticeship program. The exam fee is $100.

Sample VA Elevator Mechanic Practice Questions

Try these sample questions to test your VA Elevator Mechanic exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Under Virginia regulation 18VAC50-30-43, what is the minimum number of years of practical experience required for elevator mechanic certification?
A.2 years
B.3 years
C.4 years
D.5 years
Explanation: Virginia regulation 18VAC50-30-43 requires a minimum of 3 years of practical experience in the construction, maintenance, and service or repair of elevators, escalators, or related conveyances. This applies to all primary qualification pathways for elevator mechanic certification in Virginia.
2Which Virginia state agency administers the elevator mechanic certification program?
A.Virginia Department of Labor and Industry
B.Virginia Department of Housing and Community Development
C.Virginia Department of Professional and Occupational Regulation (DPOR)
D.Virginia Office of the State Inspector General
Explanation: The Virginia Department of Professional and Occupational Regulation (DPOR), specifically through the Board for Contractors, administers the elevator mechanic certification program. DPOR oversees licensing and certification for various trades and professions in Virginia.
3How many hours of formal vocational training are required under 18VAC50-30-43 for the standard Virginia elevator mechanic certification pathway?
A.72 hours
B.100 hours
C.144 hours
D.200 hours
Explanation: Under 18VAC50-30-43, applicants for the standard certification pathway must have 144 hours of formal vocational training in addition to 3 years of practical experience. Virginia does allow experience in excess of 4 years to be substituted for training at a ratio of 1 year per 40 hours, up to a maximum of 120 hours.
4Under Virginia regulations, what ratio is used when substituting excess practical experience for vocational training hours?
A.1 year of experience for 20 hours of training
B.1 year of experience for 40 hours of training
C.1 year of experience for 60 hours of training
D.2 years of experience for 40 hours of training
Explanation: Virginia regulation 18VAC50-30-43 allows experience in excess of 4 years to be substituted for formal vocational training at a ratio of 1 year of experience for 40 hours of training. However, this substitution is capped at a maximum of 120 hours, meaning at least 24 hours of formal training is still required.
5Which of the following is a valid alternative qualification pathway for Virginia elevator mechanic certification?
A.Completion of a college degree in mechanical engineering
B.Completion of a VA-approved elevator mechanic apprenticeship program plus passing the state exam
C.5 years of general construction experience
D.Holding an elevator mechanic license from any other country
Explanation: Under 18VAC50-30-43, one valid pathway is successfully completing an elevator mechanic apprenticeship program approved by the Virginia Department of Workforce Development and Advancement or registered with the U.S. Bureau of Apprenticeship and Training, plus passing the written state examination. A general construction background alone does not qualify.
6The Virginia DPOR elevator mechanic exam is administered by which testing service?
A.Prometric
B.Pearson VUE
C.PSI Services
D.NASCLA
Explanation: PSI Services administers the Virginia DPOR elevator mechanic certification exam on behalf of the Board for Contractors. PSI operates testing centers across Virginia and provides the computer-based examination. Candidates must receive pre-approval from DPOR before scheduling with PSI.
7The Virginia elevator mechanic exam is which type of exam format?
A.Closed book with no reference materials allowed
B.Open book with study guides and reference books allowed
C.Open book with reference books allowed but study guides prohibited
D.Practical hands-on exam only
Explanation: The Virginia elevator mechanic exam is an open-book examination where candidates may bring reference books that may be highlighted, underlined, and indexed. However, study guides are expressly prohibited. Reference materials are not provided at the test site, so candidates must bring their own.
8According to ASME A17.1 as adopted by Virginia, what is the maximum permitted car speed for a hydraulic elevator?
A.100 fpm
B.150 fpm
C.200 fpm
D.250 fpm
Explanation: Under ASME A17.1 as adopted by Virginia, the maximum permitted car speed for a hydraulic elevator is 200 feet per minute (fpm). Hydraulic elevators are generally limited in speed compared to traction elevators due to the nature of their drive mechanism. Most hydraulic installations operate between 75 and 150 fpm.
9What is the primary function of the governor in a traction elevator system under ASME A17.1?
A.To control the speed of the motor drive
B.To detect overspeed and activate the car safety device
C.To regulate the tension on the hoist ropes
D.To control the door opening speed
Explanation: The governor is a critical safety device in a traction elevator system that monitors car speed. If the car exceeds its rated speed by a predetermined amount, the governor activates and triggers the car safety device (safety gear), which clamps onto the guide rails to stop the car. ASME A17.1 specifies the overspeed trip points for governors.
10In Virginia, what must a candidate provide to prove completion of an apprenticeship program for elevator mechanic certification?
A.A letter from a coworker
B.A certificate of completion or other official document from the approved program
C.A self-signed affidavit of experience
D.A copy of their high school diploma
Explanation: Under 18VAC50-30-43, candidates who qualify through the apprenticeship pathway must provide a certificate of completion or other official document from an elevator mechanic apprenticeship program approved by the Virginia Department of Workforce Development and Advancement or registered with the U.S. Bureau of Apprenticeship and Training.

About the VA Elevator Mechanic Exam

The Virginia Elevator Mechanic Certification Exam is a written, open-book, computer-based exam administered by PSI on behalf of the Virginia DPOR Board for Contractors. Required under 18VAC50-30-43 (effective April 1, 2025), the exam consists of 90 multiple-choice questions to be completed in 210 minutes. It covers Virginia-adopted codes, ASME A17.1 safety standards, NEC Article 620, hydraulic and traction elevator systems, and state-specific regulations for elevator installation, maintenance, and repair.

Questions

90 scored questions

Time Limit

3.5 hours (210 minutes)

Passing Score

70% (63 of 90)

Exam Fee

$100 (Board for Contractors, Department of Professional and Occupational Regulation (DPOR))

VA Elevator Mechanic Exam Content Outline

25%

Virginia Codes and Regulations

18VAC50-30-43, VA-adopted codes, DPOR Board for Contractors rules, state permitting and inspection requirements

25%

ASME A17.1 and NEC Standards

National safety code as adopted by Virginia, NEC Article 620, electrical installation requirements

25%

Hydraulic and Traction Systems

Hydraulic elevator systems, traction elevator systems, motor controls, drives, controllers, troubleshooting

25%

Safety, Inspection, and Maintenance

LOTO procedures, periodic and acceptance inspections, fire service operation, testing procedures

How to Pass the VA Elevator Mechanic Exam

What You Need to Know

  • Passing score: 70% (63 of 90)
  • Exam length: 90 questions
  • Time limit: 3.5 hours (210 minutes)
  • Exam fee: $100

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

VA Elevator Mechanic Study Tips from Top Performers

1Master 18VAC50-30-43 and all Virginia-specific amendments to national elevator codes.
2Study ASME A17.1 Safety Code as adopted by Virginia, focusing on installation and maintenance requirements.
3Review NEC Article 620 for elevator electrical installation standards and Virginia-specific applications.
4Practice with open-book exam conditions since the VA exam allows reference materials but not study guides.
5Focus on hydraulic and traction elevator systems including motor controls, drives, and troubleshooting.
6Know LOTO procedures, acceptance and periodic inspection requirements, and fire service operation protocols.

Frequently Asked Questions

What is the Virginia elevator mechanic certification exam?

The Virginia elevator mechanic certification exam is a written, open-book, computer-based test administered by PSI on behalf of the DPOR Board for Contractors. Under regulation 18VAC50-30-43 (effective April 1, 2025), all elevator mechanics in Virginia must pass this 90-question exam to obtain state certification for installing, maintaining, and repairing elevators and conveyances.

How many questions are on the Virginia elevator mechanic exam?

The exam consists of 90 multiple-choice questions. You have 210 minutes (3.5 hours) to complete it, and you must score at least 70% (63 correct answers) to pass. The exam is open-book, meaning you can bring reference materials but not study guides.

What are the prerequisites for the VA elevator mechanic certification?

Virginia offers three qualification pathways: (1) 3 years of practical experience plus 144 hours of vocational training plus passing the state exam; (2) 3 years of experience plus a CET or NEIEP certificate; or (3) completion of a VA-approved elevator mechanic apprenticeship program plus passing the state exam. Extra experience beyond 4 years may substitute for vocational training at 1 year per 40 hours.

What topics are covered on the Virginia elevator mechanic exam?

The exam covers Virginia-adopted elevator codes and DPOR regulations, ASME A17.1 safety standards, NEC Article 620 electrical requirements, hydraulic and traction elevator systems, safety procedures including LOTO, inspection and testing protocols, and troubleshooting. Virginia-specific code amendments and regulations make up a significant portion of the exam.

How much does the Virginia elevator mechanic exam cost?

The examination fee is $100, payable to PSI when scheduling your exam. You must receive pre-approval from the DPOR Board for Contractors before you can register to take the exam. Additional fees may apply for certification issuance and renewal.