Career upgrade: Learn practical AI skills for better jobs and higher pay.
Level up
PracticeVideosBlogFlashcardsEspañol
All Practice Exams

100+ Free CA Elevator Mechanic Practice Questions

Pass your California Certified Competent Conveyance Mechanic (CCCM) exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
Not Published Pass Rate
100+ Questions
100% Free
1 / 100
Question 1
Score: 0/0

Under Cal/OSHA, what is the penalty classification for operating an elevator without a valid permit in California?

A
B
C
D
to track
Same family resources

Explore More Elevator Mechanic License

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Connecticut Elevator Mechanic

Practice Questions
1 blog

Illinois Elevator Mechanic

Practice Questions
1 blog

Massachusetts Elevator Mechanic

Practice Questions
1 blog

Washington Elevator Mechanic

Practice Questions
1 blog

Georgia Elevator Mechanic

Practice Questions

Indiana Elevator Mechanic

Practice Questions

More From This Family

Videos and articles for deeper review.

ArticleFree Elevator Mechanic Practice Test by State 2026: 1,200+ Questions23 min read
2026 Statistics

Key Facts: CA Elevator Mechanic Exam

200

Questions

Cal/OSHA

6 hours

Exam Time

Cal/OSHA

70%

Passing Score

Cal/OSHA

$210

Exam Fee

Cal/OSHA

3 years

Min. Experience

Cal/OSHA

The CCCM qualifying exam is California's state-specific elevator mechanic licensing test. It consists of 200 multiple-choice questions to be completed in 6 hours, requiring a 70% passing score. Candidates must have 3 years of experience plus apprenticeship completion or pass the state qualifying exam. The exam heavily tests California Labor Code, Cal/OSHA Title 8, and ASME A17.1.

Sample CA Elevator Mechanic Practice Questions

Try these sample questions to test your CA Elevator Mechanic exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Under California Labor Code Section 7301, who is responsible for issuing permits to operate conveyances in the state?
A.The California Contractors State License Board
B.The Division of Occupational Safety and Health (Cal/OSHA)
C.The California Department of Consumer Affairs
D.The local building department where the conveyance is installed
Explanation: Under California Labor Code Section 7301, the Division of Occupational Safety and Health (Cal/OSHA) is the authority responsible for issuing permits to operate conveyances. Cal/OSHA oversees all elevator, escalator, and conveyance safety in the state through its Elevator Unit.
2What does CCCM stand for in the context of California elevator mechanic licensing?
A.California Certified Conveyance Manager
B.Certified Competent Conveyance Mechanic
C.California Commercial Conveyance Mechanic
D.Certified Conveyance Construction Mechanic
Explanation: CCCM stands for Certified Competent Conveyance Mechanic. This is the California-specific certification required for elevator mechanics to perform installation, maintenance, and repair of elevators, escalators, and other conveyances in the state.
3According to Cal/OSHA Title 8, what is the minimum required overhead clearance (refuge space) above the car top when the car is at its highest point of travel?
A.24 inches
B.36 inches
C.48 inches
D.60 inches
Explanation: Cal/OSHA Title 8 and ASME A17.1 require a minimum of 48 inches of overhead clearance (refuge space) above the car top when the car is at its highest point of travel. This space is critical for the safety of mechanics working on top of the car during maintenance and inspection.
4Under California regulations, how often must a permitted elevator undergo a routine safety inspection?
A.Every 6 months
B.Every year
C.Every 2 years
D.Every 5 years
Explanation: California requires annual safety inspections for permitted elevators. Cal/OSHA inspectors or authorized third-party inspectors verify that each conveyance continues to meet safety standards. Failure to maintain a current inspection can result in the operating permit being revoked.
5What is the primary purpose of a lockout/tagout (LOTO) procedure when performing elevator maintenance in California?
A.To notify building management that work is in progress
B.To prevent unauthorized re-energization of equipment during maintenance
C.To document the maintenance history for Cal/OSHA records
D.To test the emergency stop circuit before beginning work
Explanation: Lockout/tagout (LOTO) is a safety procedure designed to prevent the accidental or unauthorized re-energization of equipment while maintenance or repair work is being performed. Under Cal/OSHA regulations, LOTO is mandatory before any maintenance work on conveyances to protect workers from electrical, mechanical, and hydraulic hazards.
6California Labor Code Section 7311 requires that no person shall perform work on a conveyance unless they hold which credential?
A.A general contractor's license (Class B)
B.A valid Certified Competent Conveyance Mechanic (CCCM) certification
C.An electrical journeyman license
D.A Cal/OSHA safety officer certificate
Explanation: California Labor Code Section 7311 mandates that anyone performing work on conveyances (elevators, escalators, moving walks, etc.) must hold a valid CCCM certification. This ensures that all conveyance work is performed by qualified individuals who have demonstrated competency through examination.
7According to ASME A17.1 as adopted by California, what is the maximum car speed at which a governor must trip for an elevator rated at 500 fpm?
A.500 fpm
B.575 fpm
C.625 fpm
D.750 fpm
Explanation: Per ASME A17.1, the governor overspeed switch must trip at no more than 115% of rated speed for elevators rated above 150 fpm. For a 500 fpm elevator, 115% equals 575 fpm. The governor initiates the safety system to stop the car in an overspeed condition, preventing a free-fall scenario.
8Under Cal/OSHA Title 8, what type of fire service operation must be installed in all new passenger elevators in California?
A.Phase I only
B.Phase I and Phase II
C.Phase II only
D.Fire service operation is optional in California
Explanation: Cal/OSHA Title 8 and ASME A17.1 require both Phase I (firefighter recall) and Phase II (firefighter in-car operation) fire service operation in all new passenger elevators. Phase I recalls the elevator to a designated landing upon activation of a fire alarm, and Phase II allows firefighters to control the elevator from within the car.
9What NEC article specifically covers the electrical installation requirements for elevators, dumbwaiters, escalators, and moving walks?
A.Article 430
B.Article 480
C.Article 620
D.Article 700
Explanation: NEC Article 620 covers the electrical installation requirements for elevators, dumbwaiters, escalators, moving walks, platform lifts, and stairway lifts. This article addresses conductors, wiring methods, overcurrent protection, disconnecting means, and grounding specific to these types of equipment.
10In California, what is the seismic trigger device designed to do in an elevator during an earthquake?
A.Increase elevator speed to evacuate passengers quickly
B.Automatically shut down the elevator and prevent it from running until inspected
C.Switch the elevator to emergency battery power
D.Open all doors simultaneously for evacuation
Explanation: California, due to its high seismic activity, requires seismic trigger devices on elevators. When seismic activity above a set threshold is detected, the device automatically shuts down the elevator and brings it to the nearest landing. The elevator cannot be returned to service until it has been inspected by a qualified mechanic to ensure no damage occurred.

About the CA Elevator Mechanic Exam

The California CCCM (Certified Competent Conveyance Mechanic) qualifying exam is required for elevator mechanics seeking licensure in California. This 200-question exam covers California Labor Code Sections 7300+, Cal/OSHA Title 8 regulations, ASME A17.1 safety code, NEC electrical requirements, and state-specific safety procedures for the installation, maintenance, and repair of elevators, escalators, and other conveyances.

Questions

200 scored questions

Time Limit

6 hours

Passing Score

70%

Exam Fee

$210 (Cal/OSHA, Division of Occupational Safety and Health)

CA Elevator Mechanic Exam Content Outline

25%

California Codes and Regulations

CA Labor Code 7300+, Cal/OSHA Title 8, state permitting, inspection requirements

25%

ASME A17.1 and NEC Standards

National safety code for elevators, NEC Article 620, seismic requirements

25%

Electrical and Mechanical Systems

Traction systems, hydraulic systems, motors, drives, controllers, schematics

25%

Safety, Inspection, and Maintenance

LOTO, testing procedures, periodic inspections, fire service operation

How to Pass the CA Elevator Mechanic Exam

What You Need to Know

  • Passing score: 70%
  • Exam length: 200 questions
  • Time limit: 6 hours
  • Exam fee: $210

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

CA Elevator Mechanic Study Tips from Top Performers

1Master California Labor Code Sections 7300-7324 covering conveyance safety requirements.
2Study Cal/OSHA Title 8 elevator safety orders thoroughly, as they differ from national standards.
3Know the ASME A17.1 Safety Code as adopted and amended by California.
4Review NEC Article 620 for elevator electrical installation requirements.
5Understand California seismic requirements for elevator installations and modernizations.
6Practice with timed tests to build stamina for the 6-hour, 200-question format.

Frequently Asked Questions

What is the CCCM qualifying exam in California?

The CCCM (Certified Competent Conveyance Mechanic) qualifying exam is administered by Cal/OSHA and is required for anyone seeking to work as a licensed elevator mechanic in California. It tests knowledge of California Labor Code, Cal/OSHA Title 8 regulations, ASME A17.1, and NEC requirements specific to elevator, escalator, and conveyance work.

How many questions are on the California elevator mechanic exam?

The CCCM qualifying exam consists of 200 multiple-choice questions. You have 6 hours to complete the exam, and you must score at least 70% (140 correct answers) to pass.

What are the prerequisites for the California CCCM exam?

Candidates must have at least 3 years of verifiable experience in the elevator trade and have completed a recognized apprenticeship program, or pass the state qualifying examination. Documentation of experience must be submitted to Cal/OSHA as part of the application.

What topics should I focus on for the CA elevator mechanic exam?

Focus on California-specific regulations including CA Labor Code Sections 7300-7324, Cal/OSHA Title 8 elevator safety orders, ASME A17.1 as adopted by California, NEC Article 620, and California seismic requirements for elevator installations. State-specific codes make up a significant portion of the exam.

How much does the California CCCM exam cost?

The examination fee for the CCCM qualifying exam is $210, payable to Cal/OSHA at the time of application. Additional fees may apply for license issuance and renewal.