PracticeVideosBlogFlashcardsEspañol
All Practice Exams

100+ Free AZ ROC CR-34 Painting & Wall Covering Practice Questions

Prepare for the Arizona ROC CR-34 Painting and Wall Covering (Residential/Commercial) Examination exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Arizona Registrar of Contractors Trade Examinations

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Arizona ROC R-11 Electrical (Residential) Examination

Practice Questions

Arizona ROC A (KA) Dual Engineering Examination

Practice Questions

Arizona ROC A General Engineering (Commercial) Examination

Practice Questions

Arizona ROC A-11/CR-17/R-17 Steel and Aluminum Erection Examination

Practice Questions

Arizona ROC A-12/CR-80 Sewers, Drains and Pipe Laying Examination

Practice Questions

Arizona ROC A-14 Asphalt Paving Examination

Practice Questions
2026 Statistics

Key Facts: AZ ROC CR-34 Painting & Wall Covering Exam

50 Questions

Official Question Count

PSI Content Outline

120 Minutes

Time Limit

PSI Content Outline

70%

Passing Score

Arizona Registrar of Contractors

$66

Exam Fee

PSI Services LLC

Open Book Computerized MCQ

Exam Format

PSI / AZ ROC Guidelines

100 Questions

Practice Question Bank

OpenExamPrep Practice Bank

The Arizona ROC CR-34 Painting and Wall Covering Examination consists of 50 multiple-choice questions administered in a 120-minute open-book PSI computer-delivered session with a 70% passing score ($66 fee). This practice question bank offers 100 realistic practice MCQs grounded in SSPC/NACE surface prep, WFT/DFT film calculations, airless spray tip sizing, commercial wallcovering roll estimations, EPA RRP lead rules, and OSHA 1926 safety regulations.

Sample AZ ROC CR-34 Painting & Wall Covering Practice Questions

Try these sample questions to test your AZ ROC CR-34 Painting & Wall Covering exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1According to SSPC-SP1 standards, why must solvent cleaning always be performed prior to hand tool, power tool, or abrasive blast surface preparation on steel?
A.Solvent cleaning creates an anchor profile on bare metal.
B.Solvent cleaning prevents grease and oil from being driven into the substrate profile during mechanical cleaning.
C.Solvent cleaning replaces the need for a primer coat.
D.Solvent cleaning neutralizes surface pH to 14.0.
Explanation: SSPC-SP1 Solvent Cleaning removes oil, grease, soil, and soluble salts. If mechanical prep or blast cleaning is performed over oily steel, the impact of abrasive or tools drives oil deeper into the metal pores and profile, resulting in coating adhesion failure.
2What is the primary limitation of SSPC-SP2 Hand Tool Cleaning when preparing rusted structural steel for repainting?
A.It removes all tightly adhering mill scale.
B.It removes loose mill scale, loose rust, and loose paint, but cannot remove intact, tightly adhering scale or paint.
C.It requires high-pressure water blasting equipment.
D.It leaves a 3.0 mil surface profile on soft steel.
Explanation: SSPC-SP2 specifies hand wire brushing, scraping, chiseling, and sanding. It only removes loose rust, loose scale, and peeling paint; it is incapable of removing tightly adherent mill scale or rust.
3When testing a concrete floor slab for moisture vapor emission rate (MVER) per ASTM F1869 (Calcium Chloride Test), what is the standard maximum allowable MVER limit for most non-breathable epoxy floor coatings?
A.3.0 lbs per 1,000 sq ft per 24 hours
B.10.0 lbs per 1,000 sq ft per 24 hours
C.15.0 lbs per 1,000 sq ft per 24 hours
D.25.0 lbs per 1,000 sq ft per 24 hours
Explanation: The industry standard threshold for applying non-breathable resinous coatings (such as standard epoxies) over concrete slabs without a specialized moisture mitigation system is 3.0 lbs/1,000 sq ft/24 hrs per ASTM F1869.
4What is the maximum relative humidity (RH) threshold specified by ASTM F2170 (in-situ probe testing) for installing standard non-breathable coating systems over concrete?
A.75% to 80% RH
B.95% to 99% RH
C.50% to 55% RH
D.30% to 40% RH
Explanation: ASTM F2170 measures internal relative humidity within the concrete slab. Standard non-porous floor coatings generally require an internal RH of 75% to 80% or lower to prevent osmotic blistering.
5What causes efflorescence on exterior stucco or masonry walls, and what is the proper initial cleaning procedure before painting?
A.Moisture dissolving water-soluble salts within the masonry and carrying them to the surface; remove by dry wire brushing or mild acid washing followed by a clean water rinse.
B.Oil bleeding from wood studs; remove by scrubbing with mineral spirits.
C.UV breakdown of latex resin; remove by pressure washing at 5,000 psi without detergent.
D.Saponification of alkyd primers; remove by applying high-pH lye solution.
Explanation: Efflorescence is a white crystalline deposit of water-soluble salts drawn to the surface by moisture evaporation. It must be removed by dry brushing or light acid etching (such as diluted muriatic acid or sulfamic acid) followed by thorough rinsing and drying.
6What is the acceptable pH range for fresh concrete or masonry surfaces before applying standard acrylic latex paint?
A.6.0 to 9.0 pH
B.12.0 to 14.0 pH
C.1.0 to 3.0 pH
D.4.0 to 5.0 pH
Explanation: Standard latex paints perform best on concrete/masonry with a neutral to slightly alkaline pH between 6.0 and 9.0. While alkali-resistant primers can handle up to pH 13, standard finishes risk alkali burn or adhesion loss at higher pH levels.
7When preparing new raw interior wood trim for a clear polyurethane finish, in what direction should final hand sanding be performed?
A.Parallel with (along) the wood grain
B.Perpendicular across the wood grain
C.In rapid circular orbital motions
D.At a 45-degree diagonal angle across the grain
Explanation: Final hand sanding on raw wood must always follow the direction of the wood grain. Sanding across or perpendicular to the grain tears wood fibers and creates scratch marks that become highlighted by stains and clear finishes.
8What preparation step is mandatory before applying a water-based acrylic paint over an existing smooth, high-gloss alkyd enamel surface?
A.Lightly sand or apply a liquid deglosser to dull the gloss and create a mechanical key profile.
B.Wash the wall with linseed oil to soften the gloss enamel.
C.Apply a coat of liquid wax over the high-gloss enamel.
D.Burn off the old enamel with a propane torch.
Explanation: High-gloss alkyd enamel provides a hard, slick surface that prevents acrylic topcoats from bonding mechanically. Scuff sanding with fine sandpaper (180-220 grit) or using a chemical deglosser is necessary to profile the surface for adhesion.
9Which SSPC surface preparation specification governs Power Tool Cleaning using equipment such as rotary sanders, wire wheels, or needle scalers to remove loose rust and paint?
A.SSPC-SP3
B.SSPC-SP1
C.SSPC-SP5
D.SSPC-SP10
Explanation: SSPC-SP3 defines Power Tool Cleaning. It utilizes power-driven tools (sanders, wire brushes, needle guns) to remove loose mill scale, loose rust, and loose paint.
10Why must bare carbon steel be primed promptly after hand or power tool cleaning in humid exterior environments?
A.To prevent flash rusting on the exposed reactive steel surface.
B.To allow the steel to absorb atmospheric nitrogen.
C.To increase the weight of the steel beam.
D.To harden the steel substrate before topcoating.
Explanation: Cleaned carbon steel rapidly reacts with moisture and oxygen in the air to form flash rust (surface oxidation). Priming immediately seals the steel and prevents flash rust from undermining paint adhesion.

About the AZ ROC CR-34 Painting & Wall Covering Exam

The Arizona ROC CR-34 Painting and Wall Covering (Residential/Commercial) Examination is an open-book trade examination administered by PSI Services LLC for the Arizona Registrar of Contractors. The exam tests comprehensive trade knowledge of surface preparation standards (SSPC/NACE SP1–SP13), paint chemistry and primer selection, film thickness measurement (WFT/DFT equations per SSPC-PA2), airless and HVLP spray equipment operations and safety, commercial vinyl wallcovering installation (ASTM F793 Type I–III, pattern repeats, adhesives), EPA RRP lead-safe containment rules (40 CFR 745), and OSHA 29 CFR 1926 construction safety regulations.

Questions

50 scored questions

Time Limit

120 minutes

Passing Score

70%

Exam Fee

$66 (Arizona ROC / PSI Services LLC)

AZ ROC CR-34 Painting & Wall Covering Exam Content Outline

26%

Surface Preparation

13 of 50 items on the official PSI content outline. Cleaning, patching, caulking, sanding, priming and substrate assessment before coating.

20%

Application

10 of 50 items on the official PSI content outline. Brush, roller and spray application, film build, recoat times and defect correction.

14%

General Knowledge

7 of 50 items on the official PSI content outline. Classification scope, sheens, color, adhesion, curing and general trade practice.

10%

Safety

5 of 50 items on the official PSI content outline. OSHA 29 CFR 1926, respiratory protection, ladders and scaffolds, and EPA RRP lead-safe work practices.

8%

Materials

4 of 50 items on the official PSI content outline. Coating types, primers, sealers, thinners and their substrates and service conditions.

8%

Tools and Equipment

4 of 50 items on the official PSI content outline. Brushes, rollers, airless and HVLP spray equipment, and equipment maintenance.

8%

Estimating

4 of 50 items on the official PSI content outline. Surface area takeoffs, spread rates, coats and material quantity calculations.

6%

Wall Covering

3 of 50 items on the official PSI content outline. Wallpaper, cloth and vinyl wall coverings, adhesives, seams and pattern matching.

How to Pass the AZ ROC CR-34 Painting & Wall Covering Exam

What You Need to Know

  • Passing score: 70%
  • Exam length: 50 questions
  • Time limit: 120 minutes
  • Exam fee: $66

Keys to Passing

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

AZ ROC CR-34 Painting & Wall Covering Study Tips from Top Performers

1Memorize SSPC/NACE surface preparation designations, specifically distinguishing SSPC-SP1 (Solvent Cleaning), SP2 (Hand Tool), SP3 (Power Tool), SP5 (White Metal), SP6 (Commercial Blast), SP7 (Brush-Off), SP10 (Near-White), and SP11 (Power Tool to Bare Metal).
2Master wet film thickness (WFT) to dry film thickness (DFT) calculations using WFT = DFT / (% Solids by Volume), and practice thinned paint adjustments and theoretical coverage equations (1,604 sq ft/gal per mil DFT).
3Learn airless spray tip decoding rules (e.g., tip 517 indicates a 10-inch fan pattern at 12 inches and a 0.017-inch orifice diameter) and high-pressure spray safety protocols.
4Understand commercial wallcovering classifications per ASTM F793 (Type I Light, Type II Medium, Type III Heavy Duty) and pattern matching calculations for wallpaper single rolls.
5Review EPA RRP lead-safe regulations (40 CFR 745) for target housing constructed prior to 1978, including the 6 sq ft interior / 20 sq ft exterior disturbance thresholds, prohibited practices, HEPA vacuum specs, and OSHA 1926 ladder and scaffolding safety.

Frequently Asked Questions

How many questions are on the official Arizona ROC CR-34 exam?

The official PSI CR-34 Painting and Wall Covering (Residential/Commercial) content outline lists 50 multiple-choice questions with 120 minutes allowed.

What passing score is required for the AZ ROC CR-34 exam?

A passing score of 70% is required, meaning candidates must answer at least 35 out of 50 questions correctly.

Is the Arizona ROC CR-34 examination open book?

Yes, the trade exam is open-book. Standard reference manuals such as SSPC surface preparation standards, PDCA/PCA trade guides, and OSHA 29 CFR 1926 may be used during the test.

What topics carry the highest weight on the CR-34 exam?

Surface Preparation is the largest area at 13 of 50 items (26%), followed by Application at 10 items (20%), General Knowledge at 7 items (14%), and Safety at 5 items (10%), per the PSI CR-34 content outline.

Where do I schedule the AZ ROC CR-34 trade exam?

You can schedule the examination through PSI Services LLC online at https://test-takers.psiexams.com/azcon or by telephone.