PracticeVideosBlogFlashcardsEspañol
All Practice Exams

100+ Free AZ ROC B-10 Premanufactured Spas and Hot Tubs Practice Questions

Prepare for the Arizona ROC B-10 Premanufactured Spas and Hot Tubs Examination exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
Not published Pass Rate
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Arizona Registrar of Contractors Trade Examinations

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Arizona ROC A (KA) Dual Engineering Examination

Practice Questions

Arizona ROC A General Engineering (Commercial) Examination

Practice Questions

Arizona ROC A-11/CR-17/R-17 Steel and Aluminum Erection Examination

Practice Questions

Arizona ROC A-12/CR-80 Sewers, Drains and Pipe Laying Examination

Practice Questions

Arizona ROC A-14 Asphalt Paving Examination

Practice Questions

Arizona ROC A-15 Seal Coating Examination

Practice Questions
2026 Statistics

Key Facts: AZ ROC B-10 Premanufactured Spas and Hot Tubs Exam

Arizona Registrar of Contractors (AZ ROC)

Exam Body

AZ ROC Licensing Board

PSI Services LLC

Exam Administrator

PSI Candidate Information Bulletin

30 Scored Questions

Official Question Count

PSI B-10 Exam Outline

75 Minutes

Time Limit

PSI Exam Specifications

70% (21/30)

Passing Score

AZ ROC Licensing Requirements

$66 Trade Portion

Exam Fee

PSI Bulletin 2026

100 Questions

Practice Question Bank

OpenExamPrep Study Bank

The Arizona ROC B-10 Premanufactured Spas and Hot Tubs Examination is a 30-item, 75-minute open-book trade exam administered by PSI Services LLC requiring a 70% score to pass. This 100-question practice question bank provides an English-language MCQ study adaptation designed to help candidates master NEC Article 680 electrical bonding, ISPSC circulation/piping standards, A.R.S. § 36-1681 barrier codes, and OSHA safety regulations. Note: local practice MCQs are an English-language MCQ study adaptation and do not replace official codebook navigation or required trade experience.

Sample AZ ROC B-10 Premanufactured Spas and Hot Tubs Practice Questions

Try these sample questions to test your AZ ROC B-10 Premanufactured Spas and Hot Tubs exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1A contractor is preparing a concrete pad for a self-contained premanufactured 500-gallon outdoor spa weighing 800 lbs empty and designed for up to 6 occupants (average 175 lbs per person). Assuming water weighs 8.34 lbs per gallon, what total minimum load capacity must the concrete pad and soil subgrade support?
A.6,020 lbs
B.5,220 lbs
C.4,970 lbs
D.6,820 lbs
Explanation: The total load equals empty spa weight (800 lbs) + water weight (500 gal × 8.34 lbs/gal = 4,170 lbs) + bather load (6 × 175 lbs = 1,050 lbs), which sums to 6,020 lbs. Concrete pads must be engineered to support the full dead and live load to prevent uneven settling and shell cracking.
2According to ANSI/APSP/ICC-14 standards for self-contained portable spas, what is the maximum allowable operating water temperature for a hot tub control system limit?
A.100°F (37.8°C)
B.104°F (40.0°C)
C.108°F (42.2°C)
D.112°F (44.4°C)
Explanation: ANSI/APSP/ICC-14 and safety standards strictly cap maximum spa water operating temperature at 104°F (40.0°C) to prevent hyperthermia and heat-related health hazards. Thermostatic controls and high-limit safety switches must shut down heating elements if water temperature exceeds this limit.
3When installing an acrylic-shell premanufactured spa on a concrete slab, what type of foundation surface is required beneath the spa shell structure if the manufacturer specifies full-bottom support?
A.Crushed angular gravel without compaction
B.Loose river rock bedding
C.A flat, level reinforced concrete slab or high-density foam pad per manufacturer instructions
D.Untreated wood pallets laid directly on grade
Explanation: Premanufactured spa manufacturers require a flat, level, continuous supporting surface (such as a 4-inch reinforced concrete slab) to distribute the massive weight evenly. Placing a spa on unlevel or shifting surfaces voids warranties and induces structural flex that cracks acrylic shells.
4A 4.0 kW electric spa heater operates at 240 Volts single-phase. Calculate the continuous operating current draw, and determine the minimum branch circuit conductor ampacity required under NEC rules (125% continuous duty rating).
A.22.50 A current draw; minimum 28.13 A conductor ampacity
B.20.00 A current draw; minimum 25.00 A conductor ampacity
C.14.28 A current draw; minimum 17.85 A conductor ampacity
D.16.67 A current draw; minimum 20.83 A conductor ampacity
Explanation: Operating current I = Power / Voltage = 4,000 W / 240 V = 16.67 Amps. Because electric heaters are classified as continuous loads under NEC 422 and 680, branch circuit conductors must be sized for at least 125% of the continuous load: 16.67 A × 1.25 = 20.83 Amps.
5What primary function does an air induction (venturi) valve serve in a premanufactured spa hydrotherapy system?
A.It draws ambient air into the water jet stream using low-pressure differential to increase massage force
B.It regulates the main pump RPM speed automatically
C.It injects ozone gas directly into the filter canister during backwashing
D.It prevents water backflow into the main electrical pack enclosure
Explanation: Venturi valves utilize Bernoulli's principle: high-velocity water passing through a constriction creates a localized vacuum that draws ambient air through air lines into the jet stream. This air-water mixture produces aerated hydrotherapy massage jets.
6Under ANSI/APSP/ICC-14 standards, premanufactured spas equipped with an auxiliary air blower must feature what backflow safety mechanism to prevent water from siphoning into the motor housing?
A.A single gate valve installed on the intake
B.An elevated loop extending at least 2 inches above maximum water level combined with a check valve
C.A manual drain plug below the blower base
D.A pressure relief valve set at 50 PSI
Explanation: Air blower piping must incorporate a hartford loop (an air loop rising at least 2 inches above the spa's maximum flooded water level) along with an inline check valve. This dual-protection setup prevents gravity or siphon action from pushing spa water back into the electric air blower motor.
7What is the primary operational advantage of utilizing a two-speed spa pump in a premanufactured hot tub assembly?
A.It eliminates the requirement for equipotential bonding
B.It allows the spa to run on 120V without a GFCI breaker
C.Low speed provides continuous low-energy filtration and heating while high speed provides hydrotherapy jet pressure
D.It automatically balances total dissolved solids (TDS) in the water
Explanation: Two-speed pumps allow the spa control pack to run the motor on low speed (low amperage/wattage) for quiet, energy-efficient filtration and water heating cycles, while switching to high speed only when bathers activate hydrotherapy jet action.
8When installing a factory-built self-contained spa outdoors, what insulation specification is critical to maintaining thermal efficiency and protecting internal plumbing from extreme temperature swings?
A.Fiberglass batt insulation without vapor barrier
B.Uninsulated cabinet interior with vented side louvers
C.Standard expanded polystyrene bead packing
D.Full-foam or multi-layer polyurethane cabinet insulation around shell and piping
Explanation: High-density polyurethane full-foam or perimeter thermal-wrap insulation traps heat generated by the water and motor, reduces heat loss through the acrylic shell, and physically dampens vibration while supporting internal flex piping.
9A technician observes that a spa pack high-limit safety switch trips repeatedly whenever the water temperature reaches 102°F. Which of the following is the most likely mechanical root cause?
A.Reduced water flow across the heater element caused by a clogged filter cartridge or low pump flow
B.Excessive air flow through the hydrotherapy air injectors
C.An over-filled spa tub water volume
D.Faulty equipotential bonding wire connected to the pump casing
Explanation: When water flow across an electric heater element drops due to a dirty filter, closed slice valve, or failing pump impeller, heat cannot dissipate quickly enough into the water stream. Localized water temperature inside the heater tube spikes above 118°F, triggering the high-limit switch to cut power.
10What type of auxiliary sanitizing system is commonly integrated into premanufactured spas to supplement primary disinfectants and destroy organic chloramines?
A.Copper-sulfate drip feeder
B.Ozone generator (O3) or UV-C disinfection system
C.Alum coagulant dosing pump
D.Muriatic acid gas infuser
Explanation: Ozone (O3) generators and UV-C lamp systems oxidation-sanitize recirculating spa water, breaking down combined chloramines and organic bath wastes. This reduces total chemical sanitizer consumption and minimizes skin/eye irritation.

About the AZ ROC B-10 Premanufactured Spas and Hot Tubs Exam

The Arizona ROC B-10 classification covers the installation, maintenance, repair, and replacement of premanufactured spas and hot tubs, including associated piping, filtration, circulation pumps, water heating, electrical connections, controls, and code-compliant barrier enclosures. The official PSI examination consists of 30 scored multiple-choice questions with a 75-minute time limit. Candidates must achieve a minimum passing score of 70%.

Assessment

30 scored multiple-choice questions delivered via computer at PSI test centers or online proctoring; open-book format, 75 minutes, 70% passing score.

Time Limit

75 minutes

Passing Score

70%

Exam Fee

$66 (Arizona ROC / PSI Services LLC)

AZ ROC B-10 Premanufactured Spas and Hot Tubs Exam Content Outline

23.33%

Spas and Hot Tubs

Factory-built spa unit placement, structural support/slab requirements, acrylic/fiberglass shell handling, jet placement, air blowers, pack assemblies, and self-contained vs non-self-contained spa installation standards.

16.67%

Piping, Fittings, and Valves

PVC pipe sizing, Schedule 40/80 pressure ratings, solvent cement techniques, check valves, multi-port valves, hydro-shear forces, and hydrostatic pressure testing.

16.67%

Electrical

NEC Article 680 requirements for spas and hot tubs, equipotential bonding (680.26/680.43), GFCI protection (680.44), emergency shutoff switches (680.41), feeder/branch circuit sizing, and disconnect location.

16.67%

Code Compliant Barriers

Arizona Revised Statutes A.R.S. § 36-1681 barrier requirements, ISPSC safety barrier standards, minimum 5-foot height, self-closing/self-latching gate mechanisms, maximum 4-inch sphere clearance, and door alarms.

16.67%

Circulation and Filtration Systems

Pump sizing, total dynamic head (TDH) calculations, turnover rates, cartridge and DE filtration, skimmers, main drains, and VGBA (ANSI/APSP-7) suction entrapment avoidance requirements.

10.00%

Safety

OSHA 1926 construction safety rules, chemical hazard communication (SDS), lockout/tagout (LOTO), electrical personal protective equipment, and trenching/excavation safety for underground utility lines.

How to Pass the AZ ROC B-10 Premanufactured Spas and Hot Tubs Exam

What You Need to Know

  • Passing score: 70%
  • Assessment: 30 scored multiple-choice questions delivered via computer at PSI test centers or online proctoring; open-book format, 75 minutes, 70% passing score.
  • Time limit: 75 minutes
  • Exam fee: $66

Keys to Passing

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

AZ ROC B-10 Premanufactured Spas and Hot Tubs Study Tips from Top Performers

1Master NEC Article 680, specifically Part IV (Spas and Hot Tubs), 680.26 (Equipotential Bonding), and 680.44 (GFCI Protection).
2Understand Virginia Graeme Baker Act (VGBA / ANSI/APSP-7) suction entrapment avoidance rules for spa drain covers and dual suction outlets.
3Memorize key dimensions under A.R.S. § 36-1681: 5-ft enclosure height, maximum 4-inch gap beneath fence/between pickets, and 54-inch latch height.
4Practice Total Dynamic Head (TDH) calculations, flow rate determination (GPM = Volume / Turnover time in minutes), and pipe sizing for spa jet hydraulics.
5Familiarize yourself with OSHA 1926 Subpart P trenching depth limits (shoring/sloping required at 5 ft depth) and lockout/tagout procedures during equipment servicing.

Frequently Asked Questions

What is the scope of the Arizona ROC B-10 Premanufactured Spas and Hot Tubs contractor license?

The B-10 license allows the contractor to install, repair, and service factory-premanufactured spas, hot tubs, and hydrotherapy tubs. This includes associated water circulating equipment, heaters, controls, dedicated branch circuit electrical connections, piping, and required safety barriers.

How many questions are on the official AZ ROC B-10 exam and what is the passing score?

The official PSI exam contains 30 scored multiple-choice questions with a 75-minute time limit. Candidates must achieve a score of at least 70% (21 out of 30 questions correct) to pass.

Is the official Arizona ROC B-10 exam open-book?

Yes. The examination is open-book. Approved references (such as the National Electrical Code NFPA 70, International Swimming Pool and Spa Code, and OSHA regulations) may be brought into the PSI testing center, provided they are permanently bound or in original loose-leaf binders with approved tab index markers.

What electrical bonding requirements apply to indoor vs outdoor premanufactured spas under NEC Article 680?

Under NEC 680.42 and 680.43, all metallic parts (including pump motors, heater shells, metal structural frames, metal piping, and conduits within 5 feet of the spa inside wall) must be connected to an equipotential bonding grid using a solid copper bonding conductor not smaller than 8 AWG. Outdoor spas may also utilize self-contained listing exemptions, provided all specified bonding points and GFCI provisions are met.

What are Arizona's pool and spa barrier requirements under A.R.S. § 36-1681?

Arizona state law requires residential pool and spa barriers to be at least 5 feet (60 inches) high with no openings that allow a 4-inch sphere to pass through. Gates must open outward away from the pool/spa, be self-closing, and have a self-latching device located at least 54 inches above the ground (or on the pool side at least 3 inches below the gate top).