100+ Free NPORS N402 Slinger / Signaller Theory Test Practice Questions

Pass your NPORS N402 Slinger / Signaller Theory Test exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

~80% Pass Rate

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More UK NPORS Plant & Lifting Qualifications

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

UK NPORS Plant Operator Theory Test (NPORS N001/N202)

Practice Questions100 questions

2026 Statistics

Key Facts: NPORS N402 Slinger / Signaller Theory Test Exam

100 Qs

Practice Questions

Study Adaptation Bank

80%

Theory Pass Mark

NPORS N402 Scheme

5 Years

Card Validity

NPORS / CSCS Scheme

The NPORS N402 Slinger / Signaller Theory Test assesses knowledge of sling selection, SWL/WLL calculation, BS 7121 hand and radio signals, load weight estimation, CoG positioning, and LOLER/PUWER safe lifting exclusion zones. This is an English-language MCQ study adaptation for the official assessment; it does not replace required practical, oral, written, or hands-on performance.

Sample NPORS N402 Slinger / Signaller Theory Test Practice Questions

Try these sample questions to test your NPORS N402 Slinger / Signaller Theory Test exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What does the abbreviation WLL stand for when referring to lifting equipment and accessories?

A.Working Load Limit

B.Weighted Lifting Load

C.Workplace Loading Limit

D.Withstanding Load Limit

Explanation: WLL stands for Working Load Limit, which is the maximum force or mass specified by the manufacturer that a lifting accessory is designed to sustain under standard inline service conditions.

2Under Regulation 9 of LOLER 1998, what is the maximum statutory period between Thorough Examinations for lifting accessories such as slings and shackles?

A.3 months

B.6 months

C.12 months

D.24 months

Explanation: Under Regulation 9 of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), all lifting accessories (slings, shackles, eyebolts, chains) must undergo a Thorough Examination by a competent person at least every 6 months, or in accordance with an examination scheme.

3According to BS EN 1492-1, what Working Load Limit (WLL) is represented by a GREEN synthetic flat woven webbing sling?

A.1 tonne

B.2 tonnes

C.3 tonnes

D.4 tonnes

Explanation: Under BS EN 1492-1 standard color coding for synthetic webbing slings, Violet represents 1 tonne, Green represents 2 tonnes, Yellow represents 3 tonnes, and Grey represents 4 tonnes.

4What standard minimum factor of safety (minimum coefficient of utilization) is required for synthetic flat woven webbing slings manufactured to BS EN 1492-1?

A.4:1

B.5:1

C.6:1

D.7:1

Explanation: Synthetic fiber webbing slings to BS EN 1492-1 must have a minimum safety factor of 7:1, meaning their minimum breaking strength is at least seven times their rated Working Load Limit (WLL).

5What minimum safety factor (coefficient of utilization) is specified for Grade 80 alloy steel chain slings manufactured to BS EN 818-4?

A.4:1

B.5:1

C.6:1

D.7:1

Explanation: Grade 80 and Grade 100 alloy steel lifting chain slings manufactured to BS EN standards require a minimum safety factor of 4:1.

6When applying a standard choke hitch using a single synthetic webbing sling, what mode factor must be applied to the sling's straight lift WLL?

A.0.5

B.0.8

C.1.0

D.1.4

Explanation: A standard choke hitch derates the lifting capacity of a sling due to the friction and tight bend radius at the choke point. A mode factor of 0.8 is applied (SWL = WLL x 0.8).

7What is the primary function of a spreader beam during a lifting operation?

A.To convert compressive loads into pure tension forces

B.To keep top slings vertical and eliminate compressive forces on the load

C.To increase the lifting speed of the crane winch

D.To allow the use of damaged slings safely

Explanation: A spreader beam uses top slings to create a compressive strut that holds the lower drop slings completely vertical. This prevents inward crushing or compressive forces from damaging fragile or wide loads.

8During a pre-use inspection of a Grade 80 chain sling, which defect requires the sling to be immediately removed from service?

A.Presence of minor surface light rust

B.Identified link elongation or stretch

C.Manufacturer identification tag present

D.Smooth articulation between adjacent links

Explanation: Link elongation or stretch indicates that the chain sling has been subjected to severe overload or mechanical damage, compromising its structural integrity. It must be withdrawn from service immediately.

9A synthetic webbing sling has a straight vertical WLL of 5.0 tonnes. What is its Safe Working Load (SWL) when hitched in a standard choke hitch around a cylindrical pipe?

A.3.5 tonnes

B.4.0 tonnes

C.4.5 tonnes

D.5.0 tonnes

Explanation: In a standard choke hitch, the mode factor is 0.8. Applying the calculation: SWL = 5.0 tonnes x 0.8 = 4.0 tonnes.

10A two-leg chain sling has a single leg WLL of 3.0 tonnes. What is the rated capacity of the assembly when used at an included angle between 0° and 90° (angle to vertical up to 45°)?

A.3.0 tonnes

B.4.2 tonnes

C.5.0 tonnes

D.6.0 tonnes

Explanation: Under standard UK rating tables (BS EN 818-4), for a two-leg sling operating at an included angle of 0-90° (0-45° to vertical), the mode factor is 1.4. Capacity = 3.0 tonnes x 1.4 = 4.2 tonnes.

About the NPORS N402 Slinger / Signaller Theory Test Exam

The NPORS N402 Slinger / Signaller qualification validates competence in slinging loads and directing crane movements. This is an English-language MCQ study adaptation for the official assessment; it does not replace required practical, oral, written, or hands-on performance.

Assessment

25 theory questions (80% pass mark) plus practical slinging and signaling test. This is an English-language MCQ study adaptation for the official assessment; it does not replace required practical, oral, written, or hands-on performance.

Time Limit

45 minutes

Passing Score

80%

Exam Fee

£150 - £350 (National Plant Operators Registration Scheme (NPORS))

NPORS N402 Slinger / Signaller Theory Test Exam Content Outline

25%

Lifting Accessories, Slings & SWL/WLL Calculations

Sling selection, SWL/WLL calculations, mode factors, shackles, eyebolts, and LOLER inspection criteria.

25%

Crane Signals & Radio Communication (BS 7121)

Standard hand signals according to BS 7121, radio communication protocols, and blind lifting procedures.

25%

Load Weight Estimation & Center of Gravity

Material density, volume estimation, locating center of gravity, and hook positioning.

25%

Safe Lifting Operations & Exclusion Zones

LOLER 1998 / PUWER 1998 requirements, lift plans, exclusion zones, GS6 power line clearance, and wind limits.

How to Pass the NPORS N402 Slinger / Signaller Theory Test Exam

What You Need to Know

Passing score: 80%
Assessment: 25 theory questions (80% pass mark) plus practical slinging and signaling test. This is an English-language MCQ study adaptation for the official assessment; it does not replace required practical, oral, written, or hands-on performance.
Time limit: 45 minutes
Exam fee: £150 - £350

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

NPORS N402 Slinger / Signaller Theory Test Study Tips from Top Performers

1Memorize mode factors: straight vertical (1.0), choke hitch (0.8), basket hitch 90 deg (1.4).

2Remember standard density figures: steel = 7,850 kg/m³, concrete = 2,400 kg/m³, water = 1,000 kg/m³.

3Practice standard BS 7121 hand signals for emergency stop, hoist, lower, and slew.

Frequently Asked Questions

What is the NPORS N402 Slinger / Signaller test?

The NPORS N402 test verifies a candidate's ability to safely attach loads to lifting equipment, calculate sling angles and capacities, signal crane operators using BS 7121 signals, and enforce lift plan safety controls.

What is the difference between WLL and SWL?

WLL is the maximum mass or force specified by the manufacturer under standard inline loading conditions. SWL is the maximum load that the accessory can safely lift in a specific working configuration.

Does this practice bank replace practical NPORS training?

No. This is an English-language MCQ study adaptation for the official assessment; it does not replace required practical, oral, written, or hands-on performance.