Free Practice Questions for MYK Steel Welder Level 3

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card

60+ Questions

100% Free

Loading practice questions...

Exam Review

Key Facts: MYK Steel Welder Level 3 Exam

11UY0010-3 / Rev. 04

National Qualification

MYK qualification document; current 2026 authorization notice

A1 + at least 1 elective

Required Unit Combination

MYK 11UY0010-3 Rev. 04

60% / 50%

A1 / Elective Theory Thresholds

MYK unit assessment requirements

2 or 3 years

Certificate Validity by Method

MYK qualification sections 13–15

The qualification requires A1 plus at least one of 14 elective units, with theory and practical assessment. Certificate validity is two or three years depending on the method, with six-month surveillance. This independent English MCQ bank supports conceptual study; it cannot demonstrate welding competence.

Sample MYK Steel Welder Level 3 Practice Questions

Try these sample questions to review concepts for the MYK Steel Welder Level 3 exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 60+ question experience with AI tutoring.

1Which radiation from a welding arc is chiefly responsible for arc eye, an acute injury to the surface of the eye?

A.Infrared radiation

B.Ultraviolet radiation

C.Visible red light

D.Low-frequency electromagnetic fields

Explanation: Ultraviolet radiation from the arc can injure the cornea and cause painful arc eye. Use suitable welding eye protection and protect nearby workers with appropriate screens; simply looking away does not control exposure to reflected radiation.

2A shielding-gas cylinder has a familiar shoulder colour, but its contents label is missing. What should the welder do before connecting it?

A.Identify it from the colour alone

B.Identify it from the regulator connection alone

C.Set it aside and obtain positive identification from the supplier

D.Connect it and judge the gas from the arc appearance

Explanation: The cylinder label is the primary means of identifying its contents; colour is a supporting guide. An unlabelled cylinder should be withheld from use and referred to the supplier rather than identified by a trial weld.

3A welder changes from low-current TIG work to higher-current MMA welding. How should the eye-protection filter be selected?

A.Use the darkest filter available regardless of visibility

B.Keep the previous filter because both jobs use an arc

C.Choose the filter from plate thickness alone

D.Use the applicable process/current guidance and the protector manufacturer's instructions

Explanation: Filter selection depends on the welding process and operating conditions, including current. Select suitable protection using the applicable guidance and equipment instructions, while retaining enough visibility to perform the work safely.

4During setup in a damp steel enclosure, a welder finds damaged insulation on an electrode lead. What is the appropriate response?

A.Continue after reducing welding current

B.Keep the damaged section off the floor and continue

C.Stop, isolate the equipment safely, report the defect, and have it repaired before use

D.Rely on the welding helmet to provide electrical insulation

Explanation: Damaged insulation can expose the welder to electrical hazards, especially where dampness and conductive surroundings increase risk. Isolate the equipment and arrange a competent repair or replacement; lowering welding current does not make damaged insulation safe.

5What is the principal purpose of the flame-arresting element in an oxy-fuel flashback arrestor?

A.To set the working pressure

B.To stop a flame travelling back through the gas supply system

C.To indicate the gas remaining in the cylinder

D.To set the oxygen-to-fuel ratio at the torch

Explanation: The flame-arresting element quenches a flame propagating backwards through the gas system. Pressure regulation and gas mixing have separate functions; a non-return valve alone is not equivalent to a flame arrestor.

6Which fume constituent is particularly associated with welding the zinc coating on galvanized steel?

A.Aluminium oxide

B.Nickel oxide

C.Chromium compounds

D.Zinc oxide

Explanation: Heating the zinc coating can produce zinc oxide fume, a cause of metal fume fever. Assess the coating and control exposure before welding; the substrate being steel does not remove the hazards introduced by its coating.

7A tank has passed an initial atmospheric check, but argon-shielded welding will take place inside it. Which plan best addresses the continuing confined-space risk?

A.Use the entry permit, suitable ventilation, atmospheric monitoring as required by the risk assessment, and planned rescue arrangements

B.Rely on the initial reading for the entire job

C.Use a particulate-filtering respirator as the only protection against oxygen displacement

D.Use an oxygen hose to replace air displaced by argon

Explanation: Argon can displace air as the work proceeds, so an initial acceptable reading does not guarantee continuing safety. A confined-space safe system must address changing conditions, ventilation, monitoring and rescue; a particulate filter does not supply missing oxygen.

8When assessing fume from chromium-containing stainless steel welding, which chromium species is a particular carcinogenic concern?

A.Chromium retained in the unwelded plate

B.Trivalent chromium only

C.Hexavalent chromium compounds

D.Chromium in any form has identical toxicity

Explanation: Hexavalent chromium can be present in stainless-steel welding fume and is a serious health hazard. Assess the actual process, consumables and exposure, then provide suitable fume controls; the chemical form matters as well as the element's name.

9Hot work has finished near combustible material in a building. Which action addresses the risk of delayed ignition?

A.End supervision when the visible arc stops

B.Maintain the fire watch and follow-up checks required by the hot-work permit and risk assessment

C.Inspect only the weld face before leaving

D.Leave the power source running so its fan cools the building

Explanation: Sparks and transferred heat can ignite concealed material after welding stops. Continue the specified watch and inspect affected adjacent areas according to the hot-work arrangements rather than assuming one universal duration fits every workplace.

10A welder needs protective clothing for work with frequent hot spatter. What is the best basis for selecting it?

A.Its documented suitability for welding hazards, coverage, condition and the task's risk assessment

B.Its thickness alone, even if the fabric melts

C.Its high-visibility colour alone

D.Its comfort alone, provided an apron is worn

Explanation: Select clothing designed and suitable for the expected heat, spatter and other welding hazards. Leather and appropriately treated fabrics can both be used in suitable garments; one material is not universally required for every task.

About the MYK Steel Welder Level 3 Exam

Independent English-language MCQ study adaptation for Çelik Kaynakçısı (Seviye 3), MYK national qualification 11UY0010-3 Rev. 04. Study welding safety and selected common processes, materials, joint preparation, WPS decisions and weld inspection. This is not an official translation, a simulation of the official assessment's language or practical format, or a substitute for supervised hands-on welding practice and performance assessment.

Exam sponsor: MYK-authorized certification bodies under Mesleki Yeterlilik Kurumu (MYK). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Pass compulsory A1 and at least one of B1–B14. Each unit is evaluated independently. T1 is written MCQ theory; elective P1 assesses welding performance and an actual test piece under TS EN ISO 9606-1. Rev. 04 does not specify a separate mandatory essay, oral examination, case study or portfolio assignment.

Time Limit

Theory: 1–2 minutes per question; practical duration corresponds to production working conditions. Overall time depends on the selected units and body.

Passing Score

A1 T1: 60%; elective T1: 50%. P1: at least 80%, all critical steps passed and an acceptable weld test piece.

Exam / Certification Fees

Provider-specific. TOBB MEYBEM's 5 January 2026 tariff lists TRY 7,500 with one elective plus TRY 1,500 document cost for successful candidates. Confirm current fees and additional test costs with your authorized body.

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Official sources

MYK 11UY0010-3 Rev. 04 — Çelik Kaynakçısı (Seviye 3) · Source checked 2026-10-22Opened the full qualification: compulsory A1, 14 electives, no stated national entry condition, theory and performance requirements, two- or three-year validity and six-month surveillance.
MYK 2026 authorization notice — ESAS BELGE · Source checked 2026-10-22The authorization dated 3 June 2026 includes 11UY0010-3 Rev. 04, confirming current use of this qualification.
TOBB MEYBEM — examination and certification tariff, 5 January 2026 · Source checked 2026-10-22Provider-specific fee example: TRY 7,500 with one elective and TRY 1,500 document cost. This is not a universal national examination price.
QA Akademi — Çelik Kaynakçısı certification programme · Source checked 2026-10-22Confirms Turkish delivery at this provider and illustrates provider-specific application conditions and a 1.5-minute theory-item allowance.
DEKRA — Çelik Kaynakçısı (MYK) certification programme · Source checked 2026-10-22The publicly indexed provider programme states Turkish or English. Full PDF retrieval was unavailable during this check; confirm language availability directly with the chosen body.
HSE — safety risks from welding · Source checked 2026-10-22Technical safety reference for electrical defects, confined spaces, shielding-gas displacement and fire precautions; UK guidance is not presented as Turkish law.
TWI — optical radiation hazards · Source checked 2026-10-22Supports arc-eye and eye-protection study questions.
TWI — welding fume and gases · Source checked 2026-10-22Technical reference for process, consumable and coating effects on exposure and source capture.
TWI — power-source characteristics · Source checked 2026-10-22Supports the current/voltage and self-adjusting arc scenarios.
TWI — manual metal arc process · Source checked 2026-10-22Technical reference for flux shielding and electrode families.
TWI — hydrogen-crack prevention · Source checked 2026-10-22Supports preheat and hydrogen-control concepts without asserting a universal temperature threshold.
TWI — carbon-equivalent expressions · Source checked 2026-10-22Technical reference for composition-based weldability indicators; the practice calculation supplies its complete expression.
TWI — heat input and arc energy · Source checked 2026-10-22Distinguishes arc energy from efficiency-adjusted heat input for the worked calculation.
TWI — fillet-weld geometry · Source checked 2026-10-22Supports throat and leg notation and ideal fillet geometry.
ISO — ISO 5817:2023 · Source checked 2026-10-22The publisher confirms quality levels B, C and D and identifies B as the highest requirement.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

20% of this study bank; editorial allocation

Occupational Health, Safety and Environment

PPE, optical radiation, gas identification, electrical defects, fume control, confined-space decisions, fire precautions and waste handling. Official A1 has at least 10 theory items; MYK does not publish this bank's percentages as an overall blueprint.

30% of this study bank; editorial allocation

Selected Welding Processes and Equipment

Common MMA, MIG/MAG, TIG, gas-shielded cored-wire, submerged-arc and oxy-acetylene concepts. This general bank does not cover every specialist elective equally; use your selected unit's full official knowledge and performance checklists.

25% of this study bank; editorial allocation

Materials, Consumables and Joint Preparation

Traceability, electrode selection and storage, fit-up, cleaning, tacking, preheat/interpass control, and supplied-formula carbon-equivalent and heat-input calculations.

25% of this study bank; editorial allocation

Weld Quality, Procedure Use and Inspection

WPS purpose, position and weld-symbol interpretation, throat and leg geometry, imperfection recognition, reporting, surface and internal inspection methods, and bend-test purpose.

Preparing for the MYK Steel Welder Level 3 Exam

What You Need to Know

Passing score: A1 T1: 60%; elective T1: 50%. P1: at least 80%, all critical steps passed and an acceptable weld test piece.
Assessment: Pass compulsory A1 and at least one of B1–B14. Each unit is evaluated independently. T1 is written MCQ theory; elective P1 assesses welding performance and an actual test piece under TS EN ISO 9606-1. Rev. 04 does not specify a separate mandatory essay, oral examination, case study or portfolio assignment.
Time limit: Theory: 1–2 minutes per question; practical duration corresponds to production working conditions. Overall time depends on the selected units and body.
Exam / certification fees: Provider-specific. TOBB MEYBEM's 5 January 2026 tariff lists TRY 7,500 with one elective plus TRY 1,500 document cost for successful candidates. Confirm current fees and additional test costs with your authorized body. Official sources

Using Our Practice Resources

Work through all 60 available questions
Review every answer and explanation
Track weak areas and revisit them
Use our AI tutor for tough concepts

MYK Steel Welder Level 3: Suggested Study Strategy

1Identify the exact elective process units you will take and study their official knowledge and practical checklists alongside A1 safety.

2Practise reading the job's WPS/pWPS and drawing before choosing materials, consumables, gas, polarity, fit-up or temperature settings.

3Use the specific consumable and equipment instructions for drying, gas flow and setup; avoid memorizing unsupported universal settings.

4Use MCQs to diagnose decisions and errors, then develop the physical skill through suitable supervised welding practice.

Frequently Asked Questions

What is the MYK Çelik Kaynakçısı (Seviye 3) qualification?

It is the assessed national qualification 11UY0010-3 Rev. 04 for steel welders. MYK-authorized certification bodies conduct the assessments. Candidates must pass compulsory A1 and at least one elective unit, including the required welding performance and test-piece evaluation.

Which languages are available for the official assessment?

Availability depends on the certification body. QA Akademi confirms Turkish; DEKRA's publicly indexed MYK steel-welder programme states Turkish or English. Confirm the language and any arrangements directly with your chosen body. This bank is an independent English-language MCQ study adaptation, not an official translation or a simulation of a particular provider's sitting.

Does this practice replace the practical examination?

No. MCQs can help you study safety, setup, sequencing, interpretation and troubleshooting. The official qualification also requires actual welding performance, successful critical steps and an acceptable test piece; these require practical training and assessment.

How long is the certificate valid?

Rev. 04 specifies two or three years depending on the selected method, with surveillance every six months. The three-year route requires re-examination at expiry; the two-year route uses specified testing of two weld samples made in the final six months. Confirm your certificate's method with the issuer.

Is there one fixed overall exam blueprint?

No fixed percentage split is given for all candidates. A1 and each selected elective have their own knowledge and performance checklists. This bank's topic percentages are editorial study allocations, and candidates should prioritize the official checklists for the processes they will take.

What are the entry requirements?

The national qualification lists no entry condition. Authorized bodies may publish their own application and safety conditions, so verify them before paying; QA Akademi, for example, publishes literacy, communication, age and application-document conditions.