100+ Free WSQ PWAH (Worker) Practice Questions

Pass your WSQ Perform Work at Height (Worker) Written Assessment exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Singapore MOM WSH Work-at-Height and Lifting

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

WSQ Perform Rigging and Signalling Operations (Rigger & Signalman) Written Assessment (Singapore)

Practice Questions100 questions

WSQ Supervise Safe Lifting Operations (Lifting Supervisor) Written Assessment (Singapore)

Practice Questions100 questions

WSQ Supervise Work at Height (Supervisor) Written Assessment (Singapore)

Practice Questions100 questions

Sample WSQ PWAH (Worker) Practice Questions

Try these sample questions to test your WSQ PWAH (Worker) exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Under Singapore's Workplace Safety and Health (Work at Heights) Regulations, when is a Permit-to-Work generally required for hazardous work at height?

A.Whenever any work is done standing on a step stool under 1 metre

B.Where a person could fall from a height of more than 3 metres, including falling into depths, in workplaces where the PTW rules apply

C.Only for work on ships in Singapore waters

D.Only when the worker requests one after an incident

Explanation: MOM's WAH framework treats work where a person could fall more than 3 metres (including into depths) as hazardous WAH requiring a Permit-to-Work in the workplaces covered by the regulations (notably factories as clarified in the 2014 amendments). Workers must recognise when PTW controls apply before starting such work.

2What is the primary purpose of a Fall Prevention Plan (FPP) under Singapore's work-at-height requirements?

A.To replace all risk assessments with a single checklist

B.To establish and implement systematic measures that prevent falls and integrate fall prevention into the workplace safety system

C.To list only the brands of harnesses purchased by the company

D.To waive training requirements for experienced workers

Explanation: The WSH (Work at Heights) Regulations require specified workplaces to establish and implement a Fall Prevention Plan in line with the approved code of practice. The FPP sets responsibilities, risk reduction measures, and safe systems so falls are prevented before work starts.

3According to WSH Council technical notes for Perform Work at Height, what is the written assessment format?

A.10 short-answer questions, open book, 1 hour

B.20 multiple-choice questions, closed book, 0.5 hour

C.50 true/false questions with no time limit

D.Oral interview only with no written paper

Explanation: The WSH Council technical notes mandate a closed-book written assessment of 20 MCQs lasting 0.5 hour, with a 60% passing mark, plus a separate practical assessment.

4What written-assessment pass mark is required under the WSH Council Perform Work at Height technical notes?

A.40%

B.50%

C.60%

D.90%

Explanation: Training providers must apply a 60% passing mark for the closed-book 20-MCQ written assessment. Candidates must also pass the practical assessment at 100% competency.

5If a learner fails either the written or the practical assessment on the Perform Work at Height course, what is the overall outcome?

A.Pass, if attendance was 100%

B.Fail overall; both assessments must be passed

C.Pass with a supervisor countersignature

D.Conditional pass valid for one week only

Explanation: Industry requirements in the technical notes state the learner must pass BOTH written and practical assessments. Failure of either renders a Fail outcome; the participant must re-attempt the course and assessments (written assessment allows only one attempt before re-coursing).

6Which Singapore statute framework underpins duties to manage workplace safety, including work at height?

A.The Workplace Safety and Health Act

B.The Road Traffic Act alone as the sole workplace safety statute

C.The Employment Act alone with no WSH subsidiary regulations

D.The Building Control Act alone with no WSH duties for height work

Explanation: Work-at-height duties sit under the Workplace Safety and Health Act and subsidiary WSH (Work at Heights) Regulations, together with approved codes of practice and Singapore Standards referenced in the course.

7Under the hierarchy approach emphasised for work at height, what should the responsible person ensure first where reasonably practicable?

A.That every worker buys their own harness before any planning

B.That work at height is avoided where the work can be done safely otherwise than at height

C.That only fall-arrest PPE is used with no engineering controls

D.That PTW paperwork is skipped for short tasks

Explanation: The WAH Regulations include a duty to avoid work at height where it is reasonably practicable to do the work safely otherwise than at height. Eliminating the need to work at height is the preferred first control.

8Which approved practice document is specifically referenced for working safely at heights in Singapore WAH training?

A.Code of Practice for Working Safely at Heights

B.Code of Practice for Food Hygiene only

C.Singapore Highway Code only

D.International shipping cargo stowage manuals only

Explanation: The WSH Council technical notes list the Code of Practice for Working Safely at Heights among key references, alongside the WAH Regulations and related WSH guidelines and Singapore Standards.

9Singapore Standards commonly referenced for personal fall arrest and height PPE in PWAH training include:

A.SS 528 and SS 570

B.SS 1 only for office stationery

C.ISO 9000 alone with no PPE standards

D.ASTM soil testing standards only

Explanation: Course resource lists include Singapore Standards SS 528 (Personal Fall Arrest Systems) and SS 570 (specification for PPE for protection against falls from a height), which inform equipment and system expectations.

10Who has a duty to ensure persons who carry out work at height are trained before doing that work?

A.Only the worker's family members

B.The responsible person of any person who carries out or is to carry out work at height

C.Only the equipment manufacturer overseas

D.Only the fire service after an incident

Explanation: The WAH Regulations place a duty on the responsible person to ensure a person works at height only after receiving adequate safety and health training for that work. Workers must also follow training and safe procedures.

About the WSQ PWAH (Worker) Exam

The WSQ Perform Work at Height competency unit (TSC Code WPH-GMS-1110-1.1) is the mandatory worker-level course for personnel who perform work at height in construction and other sectors in Singapore. It covers three performance statements (equipment checks, correct use of fall arrest/prevention systems, and self-relief for harness suspension trauma) and seven underpinning knowledge areas spanning WAH legislation, equipment types and selection, fall arrest versus fall prevention, inspection and records, hazard identification, and fall control measures.

Assessment

Closed-book written assessment of 20 MCQs (0.5 hour, pass mark 60%) plus a 1-hour practical performance assessment requiring 100% competency across stations (harness fitting, twin-lanyard 100% tie-off, vertical/horizontal lifelines, SRLs, fragile-surface avoidance, ladder 3-point contact, and prioritised self-relief for suspension trauma). Both components must be passed. Course unit code WPH-GMS-1110-1.1; RLH 7.5 hours.

Time Limit

Written 0.5 hour; practical 1 hour; full course including training about 7.5 hours

Passing Score

Written: 60%. Practical: 100% competency (Competent). Must pass both; one written attempt — Not Yet Competent requires re-coursing. Practical: ≤3 mistakes cumulatively may allow same-day reattempt (max two attempts).

Exam Fee

Set by SSG-approved providers; typical published fees about S$75–S$125 before/with GST depending on provider and funding. Confirm current fee and SkillsFuture eligibility with the training provider. (SkillsFuture Singapore (WSQ SOA) with MOM/WSH Council oversight of mandated WSH courses)

WSQ PWAH (Worker) Exam Content Outline

15%

Legislation and Guidelines pertaining to WAH

WSH Act, WAH Regulations, Fall Prevention Plan, PTW for hazardous WAH, and Codes/Standards for working safely at height.

15%

Types of WAH Equipment and Unsafe Practices

Harnesses, lanyards, SRLs, lifelines, ladders and scaffolds; recognising common unsafe practices.

12%

Criteria for Selection of WAH Equipment

Selecting fall prevention or arrest gear for the task, free-fall distance, and suitable access equipment.

18%

Fall Arrest System and Fall Prevention Systems

Prevention before arrest, guardrails vs personal fall arrest, shock absorbers, and 100% tie-off.

14%

WAH Equipment Inspection and Record Keeping

Pre/post-use checks, tagging defective equipment, and inspection records.

13%

WAH Hazard Identification

Fall hazards, fragile surfaces, open edges, unstable platforms, and related site risks.

13%

WAH Fall Control Measures

Hierarchy of controls, PTW/scaffold checks, emergency response, and suspension-trauma self-relief.

How to Pass the WSQ PWAH (Worker) Exam

What You Need to Know

Passing score: Written: 60%. Practical: 100% competency (Competent). Must pass both; one written attempt — Not Yet Competent requires re-coursing. Practical: ≤3 mistakes cumulatively may allow same-day reattempt (max two attempts).
Assessment: Closed-book written assessment of 20 MCQs (0.5 hour, pass mark 60%) plus a 1-hour practical performance assessment requiring 100% competency across stations (harness fitting, twin-lanyard 100% tie-off, vertical/horizontal lifelines, SRLs, fragile-surface avoidance, ladder 3-point contact, and prioritised self-relief for suspension trauma). Both components must be passed. Course unit code WPH-GMS-1110-1.1; RLH 7.5 hours.
Time limit: Written 0.5 hour; practical 1 hour; full course including training about 7.5 hours
Exam fee: Set by SSG-approved providers; typical published fees about S$75–S$125 before/with GST depending on provider and funding. Confirm current fee and SkillsFuture eligibility with the training provider.

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

WSQ PWAH (Worker) Study Tips from Top Performers

1Know the difference between fall prevention (stop you reaching the edge) and fall arrest (stop a fall after it starts), and remember prevention is preferred under the hierarchy of controls.

2Memorise the written test logistics from the technical notes: 20 closed-book MCQs, 30 minutes, 60% pass, and that both written and practical must be passed.

3Practise pre-use harness and lanyard checks for cuts, fraying, deformed hardware, and missing labels, and know that defective equipment must be tagged out and reported—not used.

4For practical stations, drill 100% tie-off with twin lanyards, 3-point contact on ladders, fragile-surface (skylight) avoidance, and the prioritised self-relief techniques for harness suspension trauma.

Frequently Asked Questions

What is the WSQ Perform Work at Height (Worker) assessment format?

WSH Council technical notes require a closed-book written assessment of 20 multiple-choice questions in 0.5 hour (pass mark 60%) and a 1-hour practical performance assessment graded Competent or Not Yet Competent at 100% competency. You must pass both written and practical assessments.

Who needs the Perform Work at Height course in Singapore?

It is a mandatory training course for workers who perform work at height in construction and other industry sectors. Learners are assumed to have ES Workplace Literacy and Numeracy at level 3 or above.

What happens if I fail the written or practical assessment?

Failure of either assessment is an overall Fail. For the written test, only one attempt is allowed; a Not Yet Competent result requires re-coursing. For practical assessment, learners with no more than three cumulative mistakes may be given a same-day reattempt (maximum two attempts); more than three mistakes requires re-coursing.

How much does the WSQ Perform Work at Height course cost?

Fees are set by SSG-approved training providers and typically fall around S$75–S$125 depending on GST, provider, and funding. SkillsFuture Credit and other subsidies may apply. Confirm the current fee with your chosen provider.

What topics does the written assessment cover?

Underpinning knowledge covers legislation and guidelines for WAH, types of WAH equipment and unsafe practices, selection criteria, fall arrest versus fall prevention systems, equipment inspection and record keeping, WAH hazard identification, and WAH fall control measures, including suspension-trauma self-relief concepts tied to the practical stations.

What certification do I receive after passing?

Candidates assessed Competent receive a WSQ Statement of Attainment (SOA) from SkillsFuture Singapore for the English-language course pathway, and a Safety Pass/Card in the format required for this competency unit. A Certificate of Successful Completion may also be issued by the training provider.