PracticeVideosBlogFlashcards
All Practice Exams

Free Practice Questions for NFPA CFPE

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
120+ Questions
100% Free
Exam Review

Key Facts: NFPA CFPE Exam

73 Qs

Exam Questions

Open-book

3 hrs

Time Limit

~2.5 min/question

21 / 79

Admin vs Plan Review

NFPA 1030 Ch. 8

$499

Application Fee

$249 retest

NFPA 1/13/72/101

Reference Set

2024/2022 editions

Worldwide

Test Centers

400+ Prometric sites

NFPA CFPE has 73 multiple-choice questions, a three-hour maximum, and an open-book format at in-person Prometric centers. Administration accounts for 21% and Plan Review for 79%. Eligibility requires a high school diploma or equivalent. Pass the exam and complete the practicum within 12 months of application approval. NFPA lists $499 initially and $249 per retest; it does not publish a passing score or CFPE pass rate.

Sample NFPA CFPE Practice Questions

Try these sample questions to review concepts for the NFPA CFPE exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 120+ question experience with AI tutoring.

1Per NFPA 1030 Chapter 8, a Fire Plan Examiner shall prepare plan review reports that are clear, concise, and reflect the findings of the review. What is the primary purpose of these reports?
A.To bill the applicant for review hours
B.To document code deficiencies and communicate findings to the AHJ and applicant
C.To serve as the building permit application
D.To provide marketing content for the fire department
Explanation: NFPA 1030 section 8.2.1 requires the plans examiner to prepare reports that document observations from a plan review in accordance with applicable codes and AHJ policies. The report communicates deficiencies and compliance issues to both the applicant and the AHJ. Exam tip: Every administration JPR (8.2.x) ties back to documenting and communicating findings in writing.
2According to NFPA 1 (2024), Fire Code, what governs the precedence when a general code requirement conflicts with a more specific requirement in the same document?
A.The general requirement always governs
B.The most specific requirement governs
C.The most recently published requirement governs
D.The AHJ chooses which requirement to enforce
Explanation: NFPA 1 section 1.4 establishes that when a general requirement conflicts with a specific requirement, the specific requirement governs. This is a foundational rule of code interpretation. Exam tip: This same specific-over-general principle applies throughout the NFPA code family, including NFPA 101.
3Per NFPA 1030 section 8.2.2, when developing a plan review checklist, the checklist shall be based on which of the following?
A.Manufacturer product data sheets only
B.Applicable codes, standards, and departmental policies and procedures
C.Prior plan reviews from another jurisdiction
D.The examiner's personal judgment
Explanation: NFPA 1030 8.2.2 requires checklists and forms to be developed from applicable codes, standards, and the department's own policies so they address key issues and clearly express AHJ code requirements. Exam tip: Checklists must tie directly back to cited code sections — the examiner should be able to point to chapter and verse for each line item.
4Under NFPA 1 section 1.12, who has the authority to render interpretations of the code and to adopt policies and procedures to clarify its application?
A.The building owner
B.The design professional of record
C.The authority having jurisdiction (AHJ)
D.The International Code Council
Explanation: NFPA 1 section 1.12 vests the AHJ with authority to render interpretations and adopt policies to clarify code application. These interpretations are not intended to waive requirements. Exam tip: The AHJ definition in NFPA 1 chapter 3 includes any organization, office, or individual responsible for enforcing the requirements — often the fire marshal or chief building official.
5A plan reviewer discovers that a submittal does not comply with a prescriptive requirement but the designer proposes an alternative. Under NFPA 1 section 1.4, how should the examiner proceed?
A.Reject the plan immediately — no alternatives are permitted
B.Accept any alternative the designer proposes
C.Evaluate the alternative for equivalency and document the AHJ's approval or denial
D.Forward the alternative to the code-making committee for approval
Explanation: NFPA 1 section 1.4 permits alternative methods, materials, and equipment provided the AHJ finds them equivalent in quality, strength, fire resistance, effectiveness, durability, and safety. The AHJ must document the approval in writing. Exam tip: Equivalency decisions must be documented and kept on file — a verbal approval alone does not satisfy 1.4.
6Per NFPA 1030 section 8.2.4, when processing plan review documents given a set of plans and specifications, the plan examiner shall ensure which of the following?
A.That required permits are issued in accordance with the policies of the AHJ
B.That documents are destroyed after approval to save storage space
C.That documents are held by the reviewer personally outside AHJ systems
D.That documents are returned to the designer before any review occurs
Explanation: NFPA 1030 8.2.4 requires the examiner to process plan review documents so that required permits are issued in accordance with AHJ policies, including reviewing applications for completeness. Exam tip: Completeness screening and permit issuance tracking are both part of this JPR.
7According to NFPA 1030 section 8.3.9, when developing policies and procedures for the administration of plan review functions, the examiner must ensure they are consistent with which of the following?
A.The preferences of the largest design firm in the jurisdiction
B.Applicable laws, codes, standards, and AHJ requirements
C.The lowest-cost approach available
D.Fire department operational tactics only
Explanation: NFPA 1030 8.3.9 requires policies and procedures for plan review administration to be grounded in applicable laws, codes, standards, and AHJ requirements. Exam tip: This JPR is a Level II (CFPE) requirement — expect it on the exam as a supervisory/administrative question.
8Per NFPA 1030 section 8.3.10, a plan examiner who is asked to participate in legal proceedings must do which of the following?
A.Refuse to testify to protect the AHJ
B.Provide technical testimony based on plan review findings and applicable codes
C.Act as a legal advocate for the building owner
D.Change findings to support the AHJ's position
Explanation: NFPA 1030 8.3.10 requires the plans examiner to provide accurate technical testimony grounded in plan review findings and applicable codes and standards. Exam tip: Testimony must stay factual and code-based — never advocacy. Always refer to the specific code section in the report that supports your finding.
9Under NFPA 1030 section 8.3.20, a performance-based design submittal shall be evaluated against which of the following?
A.The prescriptive requirements only
B.The design goals, objectives, performance criteria, and stated assumptions in the design documents
C.The reviewer's personal experience
D.The building owner's operating budget
Explanation: NFPA 1030 8.3.20 requires performance-based designs to be evaluated against the design goals, objectives, performance criteria, and assumptions stated in the documentation. NFPA 101 Chapter 5 similarly governs performance-based design. Exam tip: Performance-based designs must state the design fire scenarios and safety factors — verify the assumptions remain valid throughout the building life.
10When a plan review comment letter is issued, NFPA 1030 section 8.2.1 requires that findings be reported in a manner that is both clear and what?
A.Concise and reflective of plan review findings tied to applicable codes
B.Lengthy and exhaustive
C.Informal and verbal only
D.Printed in color with photographs
Explanation: NFPA 1030 8.2.1 requires reports to be clear, concise, and to reflect findings in accordance with applicable codes and standards. Exam tip: Each comment should cite the specific code section and describe the deficiency precisely so the designer can correct and resubmit.

About the NFPA CFPE Exam

The NFPA Certified Fire Plan Examiner (CFPE) program assesses the ability to review construction documents for fire and life safety requirements. It uses the single Fire Plan Examiner role in Chapter 8 of NFPA 1030 (2024), with Administration and Plan Review domains, a 73-question open-book examination and a practicum. OpenExamPrep provides independent preparation covering code research, occupancy, construction, egress, water supply, access, systems, hazardous materials, storage and building services.

Exam sponsor: NFPA (Prometric CBT). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Questions

73 questions

Time Limit

3 hours

Passing Score

Not published by NFPA; results are reported as pass or fail

Exam / Certification Fees

$499 initial / $249 retest

Exam sponsor website

Reported exam pass rate: Not published by NFPA. No official CFPE pass-rate figure is published in the sources checked. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

21%

Administration

NFPA 1030 (2024) 8.2.1–8.2.6: reports, checklist and form design, deficiency resolution, document processing, applicable codes and standards, and alternative methods or materials.

79%

Plan Review

NFPA 1030 (2024) 8.3.1–8.3.21: design concepts; occupancy, construction and occupant load; egress; fire flow and access; policies and testimony; complex processes and hazardous materials; system installation and integration; special storage; building services; and performance-based design verification.

Preparing for the NFPA CFPE Exam

What You Need to Know

  • Passing score: Not published by NFPA; results are reported as pass or fail
  • Exam length: 73 questions
  • Time limit: 3 hours
  • Exam / certification fees: $499 initial / $249 retest Official sources

Using Our Practice Resources

  • Work through all 120 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

NFPA CFPE: Suggested Study Strategy

1Use the exam-authorized editions rather than automatically substituting the newest published code. Locate NFPA 101 Chapters 6, 7, 8 and the applicable occupancy chapter.
2Read every table heading, exception and footnote. Separate occupancy classification, hazard of contents, sprinkler hazard classification and construction type.
3Show units and rounding in occupant load, egress width, hydraulic and battery calculations. Verify the inputs as well as the arithmetic.
4Distinguish local AHJ access geometry, review policies and water-supply adjustments from requirements actually stated in NFPA 1.
5Study all 27 Chapter 8 JPRs, including policies, testimony, complex processes, system integration, special storage, building services and performance-based construction verification.

Frequently Asked Questions

What is the current NFPA CFPE exam format?

NFPA lists a 73-question, multiple-choice, open-book exam with a maximum time of three hours, delivered at in-person Prometric testing centers. The current program uses NFPA 1030 (2024) Chapter 8 and requires successful completion of a practicum as well as the exam.

What score and pass rate does NFPA publish for CFPE?

NFPA reports pass or fail and does not publish the score required to pass. NFPA does not publish a CFPE pass rate in the official sources checked. A practice percentage is a study tool, not an official cut score or a prediction of passing.

What are the CFPE eligibility requirements and completion deadline?

The current CFPE Program Overview requires a high school diploma or equivalent before sitting for the exam. It does not list a minimum number of years of work experience. Candidates have 12 months from initial application approval to pass the exam and successfully complete the practicum. The candidate handbook permits three exam attempts during the one-year eligibility period.

Which printed references are authorized for the CFPE exam?

NFPA lists NFPA 1 (2024), NFPA 13 (2022), NFPA 72 (2022), NFPA 101 (2024), and IFSTA Plans Examiner for Fire and Emergency Services, 2nd Edition. The handbook permits highlighting, notations and commercial permanent adhesive tabs prepared before the exam; additional pages, photocopies and movable sticky notes are prohibited. Do not mark or tab books during the exam.

How much does CFPE certification cost?

As checked on October 17, 2026, NFPA lists $499 for the initial application and exam, $249 for a retest, and $225 for recertification. Reference books and optional training are additional purchases. Confirm prices on the NFPA program page before paying.

What should I study, and how is CFPE maintained?

The official blueprint weights Administration at 21% and Plan Review at 79%. Study the authorized editions and use the current practicum workbook and rubric. After certification, recertify every three years with at least 50 documented professional development points, including at least 15 training points. OpenExamPrep provides independent free study materials; it does not issue NFPA certification.