Free Practice Questions for CONOCER Operador de Montacargas

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card

68+ Questions

100% Free

Loading practice questions...

Exam Review

Key Facts: CONOCER Operador de Montacargas Exam

Nivel 2

Competency Level

CONOCER RENEC

3 Elements

Verify, Travel, Stack

EC0200 standard

2 hours

Estimated Evaluation Time

EC0200 standard

3 years

Certificate Validity

EC0200 standard

15 cm

Fork Height During Travel

EC0200 standard

NOM-006-STPS-2023

Forklift Safety Rules

DOF 07/03/2024

CONOCER EC0200 (Operación de Montacargas Horizontal) is Mexico's Nivel 2 competency standard for forklift operators. Accredited certifiers evaluate three elements, pre-operational verification, travel, and stacking and unstacking, in about 2 hours and issue a judgment of Competente or Todavía no competente; the certificate is valid for 3 years. This independent OpenExamPrep bank offers English-language practice MCQs on the EC0200 criteria and NOM-006-STPS-2023.

Sample CONOCER Operador de Montacargas Practice Questions

Try these sample questions to review concepts for the CONOCER Operador de Montacargas exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 68+ question experience with AI tutoring.

1Before starting the verification of the forklift, which personal protective equipment does EC0200 require the operator to wear?

A.A welding helmet, a leather apron, and heat-resistant sleeves for the whole of the shift

B.Helmet, vest, toe-cap non-slip safety shoes, and glasses and gloves suited to the controls

C.Only gloves, because the operator stays seated and protected by the overhead guard

D.A full-body harness and a half-face respirator, as for any elevated work

Explanation: EC0200 Element 1 begins with the operator wearing PPE before verifying the equipment: helmet (casco) and vest, safety shoes with toe cap and non-slip sole, and protective glasses and gloves appropriate for handling the controls. Its knowledge item refers to the PPE in NOM-017-STPS-2008.

2How does EC0200 require the operator to check the engine oil and the automatic transmission oil?

A.By the color of the exhaust smoke after the engine has warmed up for a while

B.By adding a liter of oil to each reservoir every shift, regardless of the level, to be safe

C.By confirming each level is within the range marked on its reservoir's dipstick (bayoneta)

D.By waiting for the oil pressure warning light on the dashboard to come on

Explanation: The visual and functional inspection in Element 1 includes corroborating that the engine oil level and the automatic transmission oil level are within the established ranges, using the marks on each reservoir's dipstick.

3According to EC0200, at what level should the brake fluid be during the pre-operational check?

A.At its maximum level, as indicated on the reservoir

B.Anywhere above empty

C.At the minimum mark, to leave room for expansion

D.Brake fluid is not part of the check

Explanation: Element 1 requires verifying that the brake fluid is at its maximum level according to what the reservoir indicates. The same inspection covers hydraulic fluid (per the manufacturer), coolant, and battery electrolyte.

4Which set of cooling-system checks does EC0200 list in the visual inspection?

A.Only that the engine does not overheat after an hour of work under full load

B.Removing the radiator cap on the hot engine to look at the coolant level directly inside

C.Coolant level to the marks, radiator unobstructed and leak-free, fan blades intact, belt tensioned

D.Adding tap water to the radiator at the start of every shift so the coolant never runs low

Explanation: Element 1 lists reviewing the coolant level against the reservoir references, visually checking that the radiator's exterior has no obstructions, blows, or leaks, that the fan blades are in acceptable condition without cracks, and that the belt has no breaks or cracks and the tension recommended by the manufacturer.

5After boarding the forklift according to the manufacturer, which sequence does EC0200 describe before driving?

A.Start the engine first, then adjust the seat and fasten the belt while the forklift starts moving

B.Adjust the seat, fasten the belt, set neutral, turn the key, record the gauges, confirm the parking brake

C.Release the parking brake first so the truck is ready, then start the engine and adjust the seat

D.Start in gear with the belt unfastened, fastening it only later if a load is going to be carried

Explanation: Element 1 lists: boarding as the manufacturer indicates, starting the engine per the operating procedure, adjusting the seat to reach the pedals, fastening the seatbelt, placing the transmission lever in neutral, turning the key, recording the operating ranges shown by the dashboard indicators, and verifying that the parking brake is activated.

6How does EC0200 require the operator to test the horn during the functional check?

A.It is not part of the verification

B.Sounding it continuously for 30 seconds

C.Only if pedestrians are nearby

D.Sounding it twice briefly and/or once long

Explanation: Element 1 includes actuating the horn (claxon) two short times and/or one long time. NOM-006-STPS-2023 8.5.1 b) also requires forklifts to have a horn and a sound device that activates automatically in reverse.

7Which functional checks does EC0200 list for the forklift's warning and lighting devices?

A.Only the headlights, because the reverse alarm and beacon are checked by the maintenance staff

B.Only the dashboard indicators, because the exterior lights are tested at the end of the shift

C.Only the reverse alarm, because the lights and beacon are optional for work indoors

D.Exterior lights and switch, the reverse alarm in reverse, and the beacon (torreta) and switch

Explanation: Element 1 requires checking the exterior lights by operating their switch, the reverse alarm by activating reverse, and the torreta by operating its switch. NOM-006-STPS-2023 8.5.1 likewise requires a horn, an automatic reverse sound device, an amber flashing or rotating light while moving, and front and rear lights.

8How does EC0200 describe testing the service brakes during the pre-operational check?

A.At full speed, braking as hard as possible to test the stop

B.By pressing the pedal in short movements forward and in reverse

C.By pulling the parking brake while traveling fast down an aisle

D.Brakes are checked only by maintenance staff, not by the operator

Explanation: Element 1 requires checking the brakes by actuating their device in short movements forward and in reverse, pressing the pedal. The parking brake is checked separately by operating the hand lever as the equipment starts to move.

9Which of these is part of the EC0200 visual and functional inspection?

A.Checking only the tire tread, since the other systems are covered by the scheduled maintenance plan

B.Washing the forklift and wiping down its seat, steering wheel, and controls before every shift

C.Lifting a full-capacity load to maximum height to test the mast, chains, and hydraulic cylinders

D.Checking the extinguisher is charged, steering both ways, looking for leaks all around, and working the lift

Explanation: Element 1 lists, among other checks, verifying on the manometer that the extinguisher is charged, checking steering by turning the wheel both ways, checking for fluid leaks on the front, back, sides, and underneath, and checking the lifting mechanism by operating its controls.

10What must the forklift verification report required by EC0200 contain?

A.Only the date and the hour meter reading, since faults are reported verbally to the supervisor

B.Name of the verifying operator, complete entries, any fault found, where, the decision, and signature

C.The client's purchase order number and the number of pallets moved by the unit during the shift

D.Only the supervisor's signature, since the operator's name already appears on the shift roster

Explanation: The product of Element 1 is the verification report. It must name the operator, be completely filled in, describe any physical or mechanical fault, detail the place and component, state the decision taken, and carry the operator's signature. The glossary defines the reporte as the daily log of the unit's condition, filled in by the operator.

About the CONOCER Operador de Montacargas Exam

Independent CONOCER EC0200 practice questions by OpenExamPrep. EC0200 (Operación de Montacargas Horizontal) is the CONOCER competency standard for operators of horizontal (counterbalanced) forklifts. The standard is published in Spanish, and certification follows a practical competency evaluation of performances, products, knowledge, and attitudes by an accredited certifier, not an official multiple-choice test. This bank is an English-language MCQ study adaptation covering pre-operational verification, safe travel and stability, stacking and unstacking, parking, and the forklift rules of NOM-006-STPS-2023; it is not an official translation and does not replace the evaluation or the employer's training and authorization.

Exam sponsor: CONOCER (Consejo Nacional de Normalización y Certificación de Competencias Laborales). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

One standard with three elements, published in the DOF on 4 July 2012: Elemento 1 (Verificar las condiciones de funcionamiento del Montacargas Horizontal), Elemento 2 (Realizar el traslado y los movimientos básicos del Montacargas Horizontal), and Elemento 3 (Ejecutar la estiba y desestiba con el Montacargas Horizontal). Products are the forklift verification report, the work order, and the placed load. The evaluation is estimated at 30 minutes of desk work and 1.5 hours in the field, in a real or simulated setting.

Time Limit

About 2 hours estimated (30 minutes desk work, 1.5 hours field)

Passing Score

Competency judgment: Competente or Todavía no competente

Exam / Certification Fees

Varies by accredited certifier (not published by CONOCER)

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Official sources

CONOCER — Registro Nacional de Estándares de Competencia (RENEC) · Source checked 2026-09-30RENEC lists EC0200 'Operación de Montacargas Horizontal' as a current Nivel 2 standard with accredited certifiers
CONOCER — RENEC standard lookup (EC0200 ficha) · Source checked 2026-09-30Full EC0200 text: approved by the CONOCER Technical Committee on 24 May 2012 and published in the DOF on 4 July 2012 by the committees Para la Logística y la Cadena de Suministros de México and De la Cámara Mexicana de la Industria de la Construcción; three elements (E0717, E0718, E0719); revision period and certificate validity 3 years each; evaluation estimated at 30 minutes desk and 1.5 hours field
Diario Oficial de la Federación — NOM-006-STPS-2023 · Source checked 2026-09-30Published 7 March 2024 and in force since 3 September 2024, replacing NOM-006-STPS-2014; 8.5 sets forklift requirements and operating measures, and 10.4 requires refreshing training at least every two years
CONOCER — Preguntas Frecuentes · Source checked 2026-09-30Costs vary by standard and evaluation center; certificate validity is set in each standard; the result is competent or not yet competent; certificates are issued by the Secretaría de Educación Pública

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

Not published

Elemento 1: Verificar las condiciones de funcionamiento del Montacargas Horizontal

Wearing the required PPE, performing the visual and functional inspection in sequence (fluids, battery, cooling system, seat and seatbelt, dashboard ranges, parking brake, horn, extinguisher, steering, leaks, lifting mechanism, lights, reverse alarm, beacon, brakes), and completing a signed verification report that records faults and decisions.

Not published

Elemento 2: Realizar el traslado y los movimientos básicos del Montacargas Horizontal

Preparing the transfer by clearing people and checking the floor, then driving defensively with both hands on the wheel, forks 15 cm from the floor, three forklifts' following distance, horn at crossings, pedestrians, and doors, and no riders or personnel lifting, following a work order with origin, route, and destination.

Not published

Elemento 3: Ejecutar la estiba y desestiba con el Montacargas Horizontal

Identifying the load's center of gravity and comparing it with the specifications table, handling the load with the forks tilted slightly back, stacking with the equipment stopped and braked about 30 cm from the placement point, withdrawing the forks while looking back and using the mirrors, and parking and dismounting safely.

Preparing for the CONOCER Operador de Montacargas Exam

What You Need to Know

Passing score: Competency judgment: Competente or Todavía no competente
Assessment: One standard with three elements, published in the DOF on 4 July 2012: Elemento 1 (Verificar las condiciones de funcionamiento del Montacargas Horizontal), Elemento 2 (Realizar el traslado y los movimientos básicos del Montacargas Horizontal), and Elemento 3 (Ejecutar la estiba y desestiba con el Montacargas Horizontal). Products are the forklift verification report, the work order, and the placed load. The evaluation is estimated at 30 minutes of desk work and 1.5 hours in the field, in a real or simulated setting.
Time limit: About 2 hours estimated (30 minutes desk work, 1.5 hours field)
Exam / certification fees: Varies by accredited certifier (not published by CONOCER) Official sources

Using Our Practice Resources

Work through all 68 available questions
Review every answer and explanation
Track weak areas and revisit them
Use our AI tutor for tough concepts

CONOCER Operador de Montacargas: Suggested Study Strategy

1Learn the Element 1 inspection in order, from PPE and fluid levels to the horn test (two short and/or one long), extinguisher gauge, steering, leaks, lights, reverse alarm, beacon, and brakes, and know what the verification report must contain.

2Memorize EC0200's numbers: clear people to 1.5 m, travel with the forks 15 cm from the floor, keep three forklifts' distance, and raise the load for stacking about 30 cm from the placement point.

3Practice the stacking sequence: neutral and parking brake before raising, look back over both sides and use the mirrors when withdrawing, and lower the forks as they leave the beam.

4Know the parking criteria: assigned place on firm, level ground, no blocked aisles, accesses, or extinguishers, forks lowered, mast tilted slightly forward, engine off, key removed, parking brake on, and three points of contact to dismount.

5Review NOM-006-STPS-2023 8.5: trained and authorized operators, seatbelt use, blocked wheels on vehicles being loaded, plate capacity, forks at 0.15–0.20 m, zone speed limits, and ventilated refueling and battery areas.

Frequently Asked Questions

What is the official format of the CONOCER EC0200 evaluation?

An accredited certifier, evaluation center, or independent evaluator observes the candidate carrying out the forklift's safe operating procedures in a real or simulated setting with a horizontal forklift, loads, and a stacking area, and reviews the verification report and work order. EC0200 estimates 30 minutes of desk work and 1.5 hours in the field. There is no official multiple-choice exam.

How is the CONOCER EC0200 certification graded?

The result is a competency judgment: Competente or Todavía no competente. A candidate found competent receives a certificate of labor competency issued by the Secretaría de Educación Pública through CONOCER.

How long is an EC0200 certificate valid, and does it replace my employer's authorization?

EC0200 sets the certificate's validity at 3 years. It does not replace the employer's duties under NOM-006-STPS-2023, which allows forklifts to be operated only by personnel trained and authorized by the employer and requires refreshing that training at least every two years.

How much does CONOCER EC0200 certification cost?

CONOCER does not publish a single national fee. It states that evaluation and certification costs vary by standard and by the evaluation center chosen, so candidates should ask accredited certifiers listed in RENEC for EC0200.

Is this OpenExamPrep question bank an official CONOCER test?

No. It is an independent, English-language multiple-choice study adaptation of the EC0200 criteria and NOM-006-STPS-2023. It is not an official CONOCER examination or translation, and it cannot replace the practical evaluation or hands-on training.