PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for RBSE SS Voc Plumbing

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
Exam pass rate: See RBSE subject-wise statistics for the examination year (statistics2026.htm).
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Rajasthan RBSE Senior Secondary Vocational Subjects

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Rajasthan RBSE Senior Secondary Apparel, Made-Ups and Home Furnishing — Vocational

Practice Questions

Rajasthan RBSE Senior Secondary Automotive — Vocational

Practice Questions

Rajasthan RBSE Senior Secondary Banking, Financial Services and Insurance — Vocational

Practice Questions

Rajasthan RBSE Senior Secondary Beauty and Wellness — Vocational

Practice Questions

Rajasthan RBSE Senior Secondary Construction — Vocational

Practice Questions

Rajasthan RBSE Senior Secondary Electrical and Electronics — Vocational

Practice Questions
Exam Review

Key Facts: RBSE SS Voc Plumbing Exam

111

RBSE subject code for Plumbing

RBSE 2026 subject-wise statistics

100

Typical full marks for the subject scheme

RBSE syllabus examination scheme

3.15 hrs

Typical theory paper duration

RBSE Class 12 / Varishtha Upadhyaya syllabus scheme

33%

Typical minimum pass marks (confirm circular)

RBSE examination regulations

100

Free English MCQ study questions on this page

OpenExamPrep practice bank

RBSE Senior Secondary (Class 12) Vocational Plumbing (code 111) is a real Board of Secondary Education, Rajasthan public-examination subject with appeared candidates in the 2026 main examination subject-wise statistics. Typical scheme: Theory 80 + Sessional 20 = 100; passing generally 33% (and separate practical pass where applicable). Use these free MCQs for theory revision only.

Sample RBSE SS Voc Plumbing Practice Questions

Try these sample questions to review concepts for the RBSE SS Voc Plumbing exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1In a typical multi-storey residential building with an elevated overhead tank, fixture outlets on upper floors receive water mainly by:
A.Gravity head from the tank water level
B.Municipal main pressure alone without a tank
C.Steam pressure from a boiler only
D.Vacuum suction created by the tap
Explanation: An elevated storage tank supplies fixtures by gravity: the height difference between the free water surface and the outlet provides static head and flow. Municipal pressure may fill the tank via a pump or float valve, but day-to-day outlet pressure at fixtures is governed by tank head (minus losses).
2A soil pipe in building drainage is primarily intended to carry:
A.Rainwater only from the roof
B.Discharge from water closets and urinals (faecal waste)
C.Potable cold water to kitchen taps
D.Compressed air for pneumatic tools
Explanation: Soil pipes convey soil waste—mainly WC and urinal discharge containing faecal matter—to the drainage stack or sewer. Separate waste pipes may carry sullage from basins and sinks; rainwater is handled by rainwater pipes; potable water is a supply, not drainage.
3The main purpose of a water seal in a fixture trap is to:
A.Increase municipal water pressure at the tap
B.Filter drinking water for pathogens
C.Block sewer gases and vermin from entering the room through the fixture
D.Convert hard water into soft water
Explanation: A trap retains a water seal that forms a barrier against foul air, sewer gases, and insects rising from the drain. It does not treat drinking water, raise supply pressure, or soften hardness.
4A vent (or anti-siphonage) pipe connected to a drainage system is provided mainly to:
A.Carry hot water from the geyser to distant bathrooms
B.Increase soil pipe diameter automatically
C.Meter the quantity of sewage leaving the building
D.Admit air so traps are protected from siphonage and pressure fluctuations
Explanation: Vents equalize air pressure in the drainage network, preventing trap seals from being siphoned out or blown by positive pressure. They are not hot-water supply lines, size changers, or sewage meters.
5Compared with an S-trap, a P-trap under a wash basin is generally preferred in modern practice because it:
A.Discharges into a wall outlet and is less prone to self-siphonage than a deep S-trap to the floor
B.Doubles the water pressure of the cold supply
C.Eliminates the need for any waste pipe
D.Is always made of lead only
Explanation: P-traps turn horizontally into a wall waste and maintain a reliable seal with less risk of self-siphonage than tall S-traps discharging to the floor. Supply pressure and waste-pipe necessity are unrelated; materials vary (plastic, brass, etc.).
6In a two-pipe drainage system for buildings, soil and waste are typically:
A.Mixed freely in one untreated potable water riser
B.Kept in separate stacks with separate venting arrangements as designed
C.Discharged only through rainwater downpipes
D.Pumped under pressure into the cold-water tank
Explanation: Two-pipe systems separate soil (WC/urinal) from waste/sullage (basins, sinks, baths) with appropriate stacks and vents. Mixing with potable risers or rainwater leaders is wrong practice; sewage is not pumped into drinking-water storage.
7Horizontal drainage branches are laid to a minimum fall (gradient) so that:
A.The pipe always runs completely full under pressure like a water main
B.Rainwater is forced upward to the roof tank
C.Self-cleansing velocity is maintained and solids do not deposit in the pipe
D.Trap seals are intentionally emptied every day
Explanation: A designed fall keeps flow fast enough to transport solids (self-cleansing) without excessive scour. Building drains are gravity partially-full pipes, not pressurized full-flow mains; gradient is not for emptying traps daily or pumping to tanks.
8A gully trap is commonly used to:
A.Store potable water for drinking for seven days
B.Increase boiler steam temperature
C.Join two copper refrigeration lines
D.Receive sullage from baths/sinks/yards while maintaining a seal and preventing sewer gas entry
Explanation: Gully traps accept surface or sullage discharges outdoors or at floor level, retain a water seal, and connect to the drain while limiting gas and vermin. They are not potable storage or HVAC fittings.
9An inspection chamber (manhole) on a building drain is provided mainly so that:
A.The drain can be inspected, cleaned, and rodded at changes of direction or gradient
B.Municipal electrical cables can be stored dry
C.The water main pressure can be doubled
D.Rainwater is automatically chlorinated
Explanation: Inspection chambers give access for maintenance, clearing blockages, and checking alignment at junctions, bends, or grade changes. They are not electrical vaults, pressure boosters, or treatment plants.
10A floor trap (nahani trap) in wet areas is installed to:
A.Provide an open path for sewer gas into the bathroom
B.Collect floor wash water while retaining a seal against foul air
C.Act as a hot-water expansion vessel
D.Replace the need for a WC trap
Explanation: Floor traps collect surface wash water from bathrooms/kitchens and maintain a water seal. Leaving them dry breaks the seal; they do not expand hot water or replace WC traps.

About the RBSE SS Voc Plumbing Exam

Free English-language MCQ practice for Rajasthan RBSE Senior Secondary (Class 12) Vocational Plumbing (code 111), covering topics from official board syllabus scope and 2026 subject-wise result statistics. This bank is a study adaptation for concept practice — not an official paper simulation or practical substitute.

Exam sponsor: Board of Secondary Education, Rajasthan (RBSE), Ajmer. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Official RBSE mixed written theory paper (objective, short, and long constructed-response items as per subject design) with Theory 80 + Sessional 20 = 100 full marks, duration 3 hours 15 minutes. Local bank: English-language four-option MCQ study adaptation with explanations — not a full mixed-paper simulation. Subject code 111. Evidenced in official RBSE 2026 subject-wise main examination statistics.

Time Limit

3 hours 15 minutes (theory paper)

Passing Score

Minimum 33% marks in the subject as per RBSE examination regulations (confirm current session circulars). Where theory and practical are separate, candidates must pass each component as required by the subject scheme.

Exam / Certification Fees

As per RBSE annual examination fee notification for school/private candidates (Senior Secondary (Class 12) Vocational full board form fee is notified each cycle on rajeduboard.rajasthan.gov.in — confirm the current circular; subject papers are not separately priced on the statistics page)

Exam sponsor website

Reported exam pass rate: See RBSE subject-wise statistics for the examination year (statistics2026.htm).. This describes exam candidates, not OpenExamPrep users or results from using our resources. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

25%

Trade Fundamentals

Core concepts for Plumbing: piping systems, fixtures, water supply/drainage, safety.

25%

Tools, Materials and Processes

Standard tools, materials, and process knowledge for the trade.

20%

Safety, Hygiene and Quality

Workplace safety, hygiene, quality checks, and compliance awareness.

15%

Customer/Workplace Skills

Communication, documentation, and employability skills.

15%

Troubleshooting and Judgment

Scenario-based recognition of correct vs unsafe practice for study.

Preparing for the RBSE SS Voc Plumbing Exam

What You Need to Know

  • Passing score: Minimum 33% marks in the subject as per RBSE examination regulations (confirm current session circulars). Where theory and practical are separate, candidates must pass each component as required by the subject scheme.
  • Assessment: Official RBSE mixed written theory paper (objective, short, and long constructed-response items as per subject design) with Theory 80 + Sessional 20 = 100 full marks, duration 3 hours 15 minutes. Local bank: English-language four-option MCQ study adaptation with explanations — not a full mixed-paper simulation. Subject code 111. Evidenced in official RBSE 2026 subject-wise main examination statistics.
  • Time limit: 3 hours 15 minutes (theory paper)
  • Exam / certification fees: As per RBSE annual examination fee notification for school/private candidates (Senior Secondary (Class 12) Vocational full board form fee is notified each cycle on rajeduboard.rajasthan.gov.in — confirm the current circular; subject papers are not separately priced on the statistics page) Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

RBSE SS Voc Plumbing: Suggested Study Strategy

1Start with the official unit list for code 111 and weight high-mark units first.
2Use MCQs to diagnose weak concepts, then rewrite answers in your own words.
3Complete practical/sessional work on the school timeline — MCQs do not replace it.
4Practice previous RBSE model papers when published for constructed-response timing.
5Track errors by topic and re-test those categories after 48 hours.

Frequently Asked Questions

Is the official RBSE Plumbing exam multiple-choice only?

No. Official RBSE papers mix objective and constructed-response tasks; subjects with practical or skill components also require that evidence. The 100 questions here are an English-language MCQ study adaptation for concept practice only.

What is the subject code for RBSE Plumbing?

RBSE lists Plumbing under subject code 111 in the 2026 main examination subject-wise statistics.

What is the typical passing standard?

RBSE generally requires minimum 33% in the subject; where theory and practical are separate, candidates must meet the scheme for each component. Confirm the current session circular.

Where can I find the official syllabus?

Download board syllabus materials from rajeduboard.rajasthan.gov.in (Class 12 syllabus PDF).