PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for Maharashtra HSC Construction Technology (Vocational)

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Maharashtra HSC (MSBSHSE Class 12)

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Maharashtra HSC Accounting and Office Management — Vocational (MSBSHSE)

Practice Questions

Maharashtra HSC Agricultural Science and Technology (MSBSHSE)

Practice Questions

Maharashtra HSC Agriculture Micro-Irrigation Technician — NSQF (MSBSHSE)

Practice Questions

Maharashtra HSC Animal Husbandry and Dairy — Vocational (MSBSHSE)

Practice Questions

Maharashtra HSC Animal Science and Dairying — Bifocal (MSBSHSE)

Practice Questions

Maharashtra HSC Animal Science and Technology (MSBSHSE)

Practice Questions
Exam Review

Key Facts: Maharashtra HSC Construction Technology (Vocational) Exam

HA / HB / HC

MSBSHSE Construction Technology Class 12 paper codes for Concrete; Estimates & Contracts; Surveying

MSBSHSE vocational subject code listings and HSC exam schedules

3 hours

Typical theory duration per Construction Technology vocational paper

MSBSHSE HSC Vocational Construction Technology scheme of examination

80 + practicals

Common theory marks with practical/term work/project/visit/OJT components per paper scheme

MSBSHSE HSC Vocational Subjects syllabus (Construction Technology scheme table)

35%

Common minimum passing floor per HSC subject under MSBSHSE

Maharashtra HSC pass-mark practice (~35% each subject)

Three Std XII papers

Concrete Technology; Estimates and Contracts; Surveying

MSBSHSE HSC Vocational Construction Technology syllabus

SSC entry

Basic entry qualification for the two-year HSC Vocational Construction Technology course

MSBSHSE HSC Vocational Construction Technology introduction (VOCA_VOL_1)

English MCQ adaptation

This free bank is study practice only, not the official mixed theory–practical paper

OpenExamPrep practice design note for MSBSHSE vocational subjects

DVET +2 vocational

Construction Technology listed under Technical Group HSC Vocational courses

Directorate of Vocational Education and Training (Maharashtra) +2 course list

Maharashtra MSBSHSE HSC Vocational Construction Technology (HA/HB/HC) is a Class 12 public-exam vocational set of about 3 hours theory per paper (commonly with practical/project/OJT components) and ~35% pass floor, covering concrete, estimates/contracts and surveying — not a pure MCQ board paper. This free 2026 bank is an English MCQ study adaptation for concept fluency.

Sample Maharashtra HSC Construction Technology (Vocational) Practice Questions

Try these sample questions to review concepts for the Maharashtra HSC Construction Technology (Vocational) exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1In Maharashtra HSC Vocational Construction Technology (MSBSHSE), the Class 12 theory papers commonly coded HA, HB and HC primarily cover which trio of subjects?
A.Concrete Technology; Estimates and Contracts; Surveying
B.Building Materials only; AutoCAD only; Plumbing only
C.Physics; Chemistry; Mathematics
D.Electrical Machines; Electronics; Computer Hardware
Explanation: Official HSC Vocational Construction Technology for Std XII lists three vocational papers: Concrete Technology (HA), Estimates and Contracts (HB), and Surveying (HC). Building materials, construction methods and drawing are foundational companion themes across the two-year course.
2Ordinary Portland Cement (OPC) grades such as 33, 43 and 53 are classified mainly by which property?
A.28-day compressive strength grade of cement
B.Colour shade of the bag
C.Exact number of bags produced per day
D.Only the brand logo printed on the bag
Explanation: OPC grades (e.g., 33, 43, 53) refer to the cement compressive strength class (MPa) under standard testing practice used in India. Higher grade numbers indicate higher strength potential when used correctly in concrete.
3Which field test is most commonly used on site to assess the workability (consistency) of freshly mixed concrete?
A.Slump test
B.Tensile split test of hardened concrete only
C.Rebound hammer on wet cement bags
D.Vicats apparatus on coarse aggregate
Explanation: The slump test is the standard site method to judge workability of fresh concrete. Vicat apparatus is used for cement paste setting times; rebound hammer is for hardened concrete estimation of surface hardness/strength.
4In reinforced cement concrete (RCC), steel bars are primarily provided because concrete is relatively weak in:
A.Tension
B.Carrying any compressive load at all
C.Resisting only pure water without cement
D.Absorbing any form of heat whatsoever
Explanation: Concrete is strong in compression but weak in tension. Steel reinforcement is placed where tensile stresses develop (and for crack control and ductility).
5Personal protective equipment (PPE) that should be worn on a construction site to protect the head from falling objects is primarily a:
A.Safety helmet (hard hat)
B.Only a soft cotton cap
C.Only leather gloves
D.Only ear plugs without head protection
Explanation: A safety helmet (hard hat) is essential PPE against falling objects and overhead hazards. Gloves protect hands; ear plugs protect hearing; soft caps do not provide impact protection.
6The process of keeping concrete moist after placing so that hydration can continue properly is called:
A.Curing
B.Batching only
C.Vibrating only
D.Form striking only
Explanation: Curing maintains adequate moisture and temperature so cement hydration continues and concrete gains intended strength and durability. Batching measures ingredients; vibration compacts concrete; form striking removes formwork.
7In chain surveying, linear distances on the ground are primarily measured using a:
A.Surveying chain or measuring tape
B.Only a dumpy level without any tape
C.Only a paint brush
D.Only a theodolite without linear measurement
Explanation: Chain surveying is a linear surveying method using chains or tapes (with ranging rods, arrows, optical square or cross-staff) to measure distances and offsets.
8A detailed estimate for a building works out quantities of items and their costs primarily so that the owner or agency can:
A.Know expected cost and material or labour requirements before execution
B.Avoid preparing any drawings at all
C.Eliminate the need for any site supervision
D.Cancel all safety requirements on site
Explanation: Estimates quantify work items, materials, labour and cost to plan budget, tendering and control. They do not replace drawings, supervision or safety obligations.
9Brick masonry quantity for a solid wall is commonly measured in which unit in metric practice?
A.Cubic metres (m³)
B.Only litres of paint
C.Only kilograms of steel
D.Only watts of electricity
Explanation: Brickwork (solid masonry walls) is typically measured in cubic metres (volume equals length times thickness times height, with rules for openings and deductions).
10Which material is the binder in ordinary cement concrete?
A.Cement (with water forming paste)
B.Only coarse aggregate without paste
C.Only reinforcement steel bars
D.Only formwork plywood
Explanation: Cement plus water form cement paste that binds fine and coarse aggregates into concrete. Aggregates are fillers; steel is reinforcement; formwork is temporary moulding.

About the Maharashtra HSC Construction Technology (Vocational) Exam

Maharashtra HSC Construction Technology under MSBSHSE is a two-year vocational course (Std XI–XII) preparing site supervisors, survey assistants, estimators, and related construction technicians. Class 12 theory papers HA, HB and HC cover Concrete Technology, Estimates and Contracts, and Surveying. Core themes include cement, aggregates and mix design; workability and curing; RCC members, formwork and scaffolding; building construction methods and finishes; quantity surveying with simple estimation calculations; tenders and contracts; PPE and site safety; and chain-to-total-station surveying methods. Official assessment is typically a ~3-hour theory paper per vocational paper plus practical/project/OJT components, with about 35% required to pass each subject. This free local bank provides English four-option MCQs for revision; pair it with vocational textbooks, practical records, written short/long answers, and official papers via mahahsscboard.in.

Exam sponsor: Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE), Pune. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Maharashtra Higher Secondary Construction Technology is an HSC (Class 12) vocational course under MSBSHSE, Pune (Engineering and Technology Group). Class 12 papers are Concrete Technology (HA), Estimates and Contracts (HB), and Surveying (HC). Official logistics commonly describe written theory work of about 80 marks over about 3 hours per paper with practical, term work, project, industrial visit, and OJT components (often described toward a 200-mark paper total in the published vocational scheme — confirm the year’s circular). Qualifying typically requires about 35% in each subject. Syllabus centres on concrete technology (ingredients, Abrams w/c law, workability, mix grades, admixtures, special concretes, RCC reinforcement, formwork, scaffolding), estimates and contracts (approximate/detailed estimates, measurement rules, rate analysis, tenders, contracts, PWD bills/MB), and surveying (chain, compass, plane table, leveling, contouring, theodolite, total station), with foundations in building materials, construction methods, drawings, safety, and services coordination. English/Marathi medium materials are typical; this practice bank is an English-language MCQ study adaptation. Confirm current syllabus and circulars on mahahsscboard.in.

Time Limit

3 hours

Passing Score

35%

Exam / Certification Fees

As notified by MSBSHSE and paid through affiliated junior colleges for regular and private/improvement sittings (no single fixed public subject fee for all categories).

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

~28% of this local bank

Concrete Technology (HA)

Ingredients, w/c ratio, workability, mix grades, admixtures, operations, defects, QC.

~22% of this local bank

Estimates & Contracts (HB)

Estimates, measurement units, material quantities, rate analysis, tenders, contracts.

~22% of this local bank

Surveying (HC)

Chain/compass, bearings, leveling, contours, theodolite, total station.

~12% of this local bank

Building Materials & Safety

Cement, bricks, mortar, steel, PPE, scaffolding, accident precautions.

~12% of this local bank

Construction Methods, RCC/Steel & Finishes

Foundations, masonry, DPC, stairs, plaster/pointing, formwork, cover.

~4% of this local bank

Drawings, Services & Supervision

Plan basics, plumbing/electrical coordination, pre-pour checks.

Preparing for the Maharashtra HSC Construction Technology (Vocational) Exam

What You Need to Know

  • Passing score: 35%
  • Assessment: Maharashtra Higher Secondary Construction Technology is an HSC (Class 12) vocational course under MSBSHSE, Pune (Engineering and Technology Group). Class 12 papers are Concrete Technology (HA), Estimates and Contracts (HB), and Surveying (HC). Official logistics commonly describe written theory work of about 80 marks over about 3 hours per paper with practical, term work, project, industrial visit, and OJT components (often described toward a 200-mark paper total in the published vocational scheme — confirm the year’s circular). Qualifying typically requires about 35% in each subject. Syllabus centres on concrete technology (ingredients, Abrams w/c law, workability, mix grades, admixtures, special concretes, RCC reinforcement, formwork, scaffolding), estimates and contracts (approximate/detailed estimates, measurement rules, rate analysis, tenders, contracts, PWD bills/MB), and surveying (chain, compass, plane table, leveling, contouring, theodolite, total station), with foundations in building materials, construction methods, drawings, safety, and services coordination. English/Marathi medium materials are typical; this practice bank is an English-language MCQ study adaptation. Confirm current syllabus and circulars on mahahsscboard.in.
  • Time limit: 3 hours
  • Exam / certification fees: As notified by MSBSHSE and paid through affiliated junior colleges for regular and private/improvement sittings (no single fixed public subject fee for all categories). Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

Maharashtra HSC Construction Technology (Vocational): Suggested Study Strategy

1Drill HA concrete first: cement grades, Abrams w/c law, slump, nominal mixes (1:2:4 / M15), curing, honeycombing, and cube ages 7 & 28 days.
2Keep a one-page formula sheet for HB: volumes (L×B×D), plaster area, brickwork with opening deductions, steel weight d²/162, and cement-bag constants.
3For HC, master HI = RL + BS and RL = HI − staff reading, plus FB−BB = 180° for local attraction checks.
4Link formwork/scaffolding checklists with PPE (helmet, harness, edge protection) for combined site-safety long answers.
5After MCQ concept checks, write full short/long answers and complete practical/project/OJT records under board timing using MSBSHSE past papers and vocational exercises.

Frequently Asked Questions

How is Maharashtra HSC Vocational Construction Technology officially examined?

Construction Technology is examined under the Maharashtra Higher Secondary Certificate Examination as Class 12 vocational papers commonly coded HA (Concrete Technology), HB (Estimates and Contracts), and HC (Surveying). Logistics commonly describe written theory work of about 3 hours (often around 80 marks) plus practical, term work, project, industrial visit, and OJT components (often described toward a 200-mark paper total in the vocational scheme) — confirm the year’s circular. Papers typically mix objective, short-answer, and long-answer components. Candidates generally need about 35% in each subject to pass. Confirm the year’s syllabus, timetable, and circulars on mahahsscboard.in.

What do subject codes HA, HB and HC mean?

For Construction Technology vocational papers, HA is Paper I Concrete Technology, HB is Paper II Estimates and Contracts, and HC is Paper III Surveying, as listed in MSBSHSE vocational subject code schemes and board exam schedules. Always match codes on your college registration and admit card.

Is this practice bank the same format as the official HSC Construction Technology papers?

No. Official MSBSHSE HSC Vocational Construction Technology papers mix objective items with short and long written answers (and practical/project/OJT work). This bank is an English-language multiple-choice study adaptation for concepts and simple calculations only — not an official translation, blueprint replica, or full written-paper/practical simulation.

What syllabus does this bank follow?

It is aligned to Maharashtra HSC Vocational Construction Technology under MSBSHSE: Concrete Technology (ingredients, properties, mix design, admixtures, RCC, formwork, scaffolding); Estimates and Contracts (estimates, measurement, rate analysis, tenders, contracts, PWD works); Surveying (chain, compass, plane table, leveling, contours, theodolite, total station); plus foundational building materials, construction methods, finishes, drawings, safety, and services coordination. Always confirm the current MSBSHSE/DVET vocational syllabus for your year.

What is the pass mark for Maharashtra HSC Construction Technology papers?

MSBSHSE commonly requires a minimum of about 35% in each subject out of the full subject total with theory and practical/project components as applicable. Always verify the current Higher Secondary notification for your sitting.

Where should I check official syllabus, papers, and results?

Use the MSBSHSE site at mahahsscboard.in for circulars and question papers, the HSC subjects portal for codes, the HSC Vocational Subjects syllabus PDF (VOCA_VOL_1.pdf Construction Technology section), DVET +2 vocational course listings at dvet.gov.in, and your divisional board portals for results and hall tickets.