What is Maharashtra HSC NSQF Automotive Service Technician (subject code G3)?

It is an MSBSHSE Higher Secondary skill/NSQF subject listed as Automotive Service Technology / AUTOMOTIVE SERVICE TECH. (code G3). It focuses on entry-level automotive service workshop competencies rather than the multi-paper HSC Vocational Automobile Technology trade alone.

How is G3 different from vocational Automobile Technology (GA/GB/GC) and bifocal Scooter & Motorcycle Servicing?

MSBSHSE subject statistics list G3 AUTOMOTIVE SERVICE TECH. separately from GA/GB/GC Automobile Technology papers and from A3 Scooter & Motorcycle Servicing. G3 is a single-code NSQF skill subject emphasising routine service technician knowledge; GA/GB/GC is a multi-paper Engineering & Technology vocational pathway; A3 focuses on two- and three-wheeler servicing.

Is this practice bank the same format as the official HSC paper?

No. Official assessment for NSQF/vocational HSC subjects typically mixes written theory with practical, project, performance, or skills evidence. This bank is an English-language multiple-choice study adaptation only — not an official translation, blueprint replica, or substitute for practical skill demonstration.

What topics should students prioritise?

Prioritise ICE and 2/4-stroke fundamentals, lubrication and cooling, battery/electrical safety, hydraulic brake service judgment, tyre pressure and wear, service schedules, correct tools and torque, workshop PPE, emissions/PUC awareness, and structured basic diagnostics.

What is the typical pass mark?

MSBSHSE commonly requires about 35% in each HSC subject including applicable theory and practical/internal components. Always verify the current Higher Secondary notification for your sitting; do not assume an SSC Qualification Pack percentage is identical to the board subject pass rule.

Where should I check official information?

Use mahahsscboard.in for circulars, syllabi portals, and exam logistics, plus your junior college for NSQF practical requirements and any dual-certification assessment instructions.

All Practice Exams

100+ Free Maharashtra HSC NSQF Automotive Service Technician (G3) Practice Questions

Maharashtra Higher Secondary Certificate (HSC / Class 12) NSQF Automotive Service Technology / Automotive Service Technician under the Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE), Pune — board subject code G3 (listed as AUTOMOTIVE SERVICE TECH.) practice questions are available now; exam metadata is being verified.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Maharashtra HSC (MSBSHSE Class 12)

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

2026 Statistics

Key Facts: Maharashtra HSC NSQF Automotive Service Technician (G3) Exam

MSBSHSE subject code for Automotive Service Tech. / Automotive Service Technology

MSBSHSE HSC subject statistics listings

~35%

Common minimum HSC subject pass floor under MSBSHSE (confirm year notification)

Maharashtra HSC pass-mark practice

Theory + practical/skills

Official NSQF HSC assessment mode — not a pure MCQ board paper

MSBSHSE / NSQF vocational assessment pattern

Service technician focus

ICE, fluids, electrics, brakes, tyres, schedules, tools, safety, emissions, diagnostics

Automotive service technician job-role competencies (e.g., ASDC ASC/Q1402 family)

Distinct from GA–GC and A3

G3 is listed separately from Automobile Technology papers and Scooter & Motorcycle Servicing

MSBSHSE subject code listings

English MCQ adaptation

This free local bank is not the official Higher Secondary paper format

OpenExamPrep practice policy

MSBSHSE HSC NSQF Automotive Service Technician (G3) is a Maharashtra skill-based HSC subject on four-wheeler routine service and workshop safety, assessed with theory plus practical/skills (not pure MCQ), commonly with a ~35% pass floor — confirm the year’s circulars. Distinct from GA/GB/GC Automobile Technology and A3 Scooter & Motorcycle Servicing. This free 2026 bank is an English MCQ study adaptation for ICE, fluids, electrics, brakes, tyres, tools, emissions, diagnostics, and torque safety.

Sample Maharashtra HSC NSQF Automotive Service Technician (G3) Practice Questions

Try these sample questions to test your Maharashtra HSC NSQF Automotive Service Technician (G3) exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1In a typical four-stroke petrol engine, the air–fuel mixture is compressed during which stroke?

A.Intake stroke

B.Compression stroke

C.Power stroke

D.Exhaust stroke

Explanation: During the compression stroke both valves are closed and the piston rises, compressing the charge before ignition.

2Spark-ignition (SI) engines typically ignite the charge using:

A.Compression heat alone with no spark plug

B.A spark plug producing an electric spark near the end of compression

C.Only glow plugs used exclusively on all petrol engines

D.A diesel injector spraying fuel into cold ambient air only

Explanation: SI engines (petrol/gasoline) use a spark plug to ignite the compressed mixture near TDC at the end of compression.

3In a compression-ignition (CI) diesel engine, fuel is normally introduced:

A.Through a carburettor into the intake manifold only

B.By spark plug injection into the oil sump

C.By high-pressure injection into compressed hot air in the cylinder

D.As a pre-mixed charge always ignited by a spark plug

Explanation: Diesel CI engines compress air, then inject fuel into hot compressed air so it auto-ignites.

4The component that converts reciprocating piston motion into rotary crankshaft motion is the:

A.Camshaft alone

B.Connecting rod and crankshaft assembly

C.Oil pump only

D.Thermostat housing

Explanation: The connecting rod joins the piston to the crank throw so linear piston motion becomes crankshaft rotation.

5TDC (top dead centre) refers to the piston position when it is:

A.At its lowest point in the cylinder

B.At its highest point in the cylinder

C.Halfway down on the power stroke only

D.Outside the cylinder on the workbench

Explanation: TDC is the uppermost piston position; BDC is the lowest. Timing and stroke definitions reference these points.

6Which statement best describes the function of the cylinder head gasket?

A.It only decorates the engine for appearance

B.It seals combustion pressure and separates oil/coolant passages between head and block

C.It replaces the need for engine oil entirely

D.It is the primary ignition coil for spark timing

Explanation: The head gasket seals the combustion chamber and keeps oil and coolant passages from leaking or mixing between head and block.

7A typical automotive flywheel primary purpose is to:

A.Cool the radiator permanently

B.Smooth rotation by storing rotational energy and provide a friction surface for the clutch (manual)

C.Replace the battery as the only energy source

D.Measure tyre pressure automatically

Explanation: The flywheel stores kinetic energy to smooth crank pulses and, on manuals, mates with the clutch disc.

8Valve timing in a four-stroke engine is primarily controlled by the:

A.Radiator fan clutch alone

B.Camshaft and valve train (driven in time with the crankshaft)

C.Battery hydrometer reading

D.Fuel tank vent only

Explanation: The camshaft, timed to the crankshaft via belt/chain/gears, opens and closes intake and exhaust valves at the correct points in the cycle.

9If an engine’s compression ratio is increased (within design limits), the typical expected effect is:

A.Lower thermal efficiency in all cases with no other changes

B.Higher potential thermal efficiency and power density, with greater knock risk if fuel octane is inadequate

C.Automatic elimination of the need for cooling

D.Conversion of a diesel into a pure electric motor

Explanation: Higher compression generally improves efficiency and power potential but raises knock tendency in SI engines unless fuel and calibration match.

10Blue-grey smoke from the exhaust that persists after warm-up most often suggests:

A.Coolant only, with no oil involvement ever

B.Burning engine oil (for example worn rings, guides, or PCV-related oil consumption)

C.Perfectly normal operation with new oil only

D.A fully charged battery short circuit only

Explanation: Blue-grey smoke commonly indicates oil entering the combustion chamber. White sweet steam often points more toward coolant; black smoke toward rich mixture.

About the Maharashtra HSC NSQF Automotive Service Technician (G3) Practice Questions

Verified exam format metadata for Maharashtra Higher Secondary Certificate (HSC / Class 12) NSQF Automotive Service Technology / Automotive Service Technician under the Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE), Pune — board subject code G3 (listed as AUTOMOTIVE SERVICE TECH.) is pending. The practice questions above remain available while official exam length, timing, passing score, fee, and administrator details are reviewed.

100+ Free Maharashtra HSC NSQF Automotive Service Technician (G3) Practice Questions

Explore More Maharashtra HSC (MSBSHSE Class 12)

Maharashtra HSC Accounting and Office Management — Vocational (MSBSHSE)

Maharashtra HSC Agricultural Science and Technology (MSBSHSE)

Maharashtra HSC Agriculture Micro-Irrigation Technician — NSQF (MSBSHSE)

Maharashtra HSC Animal Husbandry and Dairy — Vocational (MSBSHSE)

Maharashtra HSC Animal Science and Dairying — Bifocal (MSBSHSE)

Maharashtra HSC Animal Science and Technology (MSBSHSE)

Key Facts: Maharashtra HSC NSQF Automotive Service Technician (G3) Exam

Sample Maharashtra HSC NSQF Automotive Service Technician (G3) Practice Questions

About the Maharashtra HSC NSQF Automotive Service Technician (G3) Practice Questions