All Practice Exams

100+ Free Maharashtra HSC Electrical Maintenance (Bifocal) Practice Questions

Maharashtra Higher Secondary Certificate (HSC / Class 12) Bifocal Electrical Maintenance under the Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE), Pune — board subject code A1 practice questions are available now; exam metadata is being verified.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
100+ Questions
100% Free

Loading practice questions...

2026 Statistics

Key Facts: Maharashtra HSC Electrical Maintenance (Bifocal) Exam

Subject code A1

Official MSBSHSE bifocal subject code for Electrical Maintenance

MSBSHSE HSC bifocal subject lists

2 papers

Typical bifocal Electrical Maintenance structure (Paper I + Paper II)

MSBSHSE/DVET Electrical Maintenance course patterns

~200 marks

Historical total across both papers (theory + practical components)

Public junior-college bifocal mark-distribution reporting

35%

Common minimum passing floor per HSC subject under MSBSHSE

Maharashtra HSC pass-mark practice (~35% each subject)

Theory + practical

Each paper historically mixes written theory with heavy practical assessment

Bifocal Electrical Maintenance college/board pattern summaries

English MCQ adaptation

This free local bank is not the official Higher Secondary paper format

OpenExamPrep practice policy

Maharashtra MSBSHSE HSC Bifocal Electrical Maintenance (code A1) is a Class 12 two-paper technical elective with heavy practical weight (historically ~200 marks total) and ~35% pass floor, covering wiring, appliances, transformers, motors, substations, and OH&S — not a pure MCQ board paper. This free 2026 bank is an English MCQ study adaptation for concepts, safety, and calculation fluency.

Sample Maharashtra HSC Electrical Maintenance (Bifocal) Practice Questions

Try these sample questions to test your Maharashtra HSC Electrical Maintenance (Bifocal) exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Ohm’s law states that, for a metallic conductor at constant temperature, the current I is:
A.Inversely proportional to voltage V
B.Directly proportional to voltage V
C.Equal to resistance R
D.Independent of resistance R
Explanation: Ohm’s law: V = I R, so I is directly proportional to V when R is constant (fixed temperature for metals).
2A 12 V battery drives 2 A through a resistor. The resistance is:
A.6 Ω
B.24 Ω
C.10 Ω
D.0.17 Ω
Explanation: R = V/I = 12/2 = 6 Ω.
3Electrical power delivered to a pure resistive load is given by:
A.P = V/I
B.P = V I
C.P = V + I
D.P = I/R
Explanation: Instantaneous/average power for a DC resistive load is P = V I (also P = I²R = V²/R).
4A 230 V heater draws 5 A. Its power consumption is approximately:
A.46 W
B.1150 W
C.235 W
D.0.022 kW
Explanation: P = V I = 230 × 5 = 1150 W (about 1.15 kW).
5Energy consumed by a 2 kW load running for 3 hours is:
A.6 kWh
B.2 kWh
C.0.67 kWh
D.5 kWh
Explanation: Energy (kWh) = power (kW) × time (h) = 2 × 3 = 6 kWh.
6Three 6 Ω resistors in series have an equivalent resistance of:
A.2 Ω
B.6 Ω
C.18 Ω
D.36 Ω
Explanation: Series resistances add: R_eq = 6 + 6 + 6 = 18 Ω.
7Two equal resistors of 10 Ω each connected in parallel have equivalent resistance:
A.20 Ω
B.5 Ω
C.10 Ω
D.100 Ω
Explanation: For two equal R in parallel, R_eq = R/2 = 5 Ω.
8A copper wire of resistance 4 Ω is stretched to twice its original length, keeping volume constant. Approximate new resistance is:
A.2 Ω
B.4 Ω
C.8 Ω
D.16 Ω
Explanation: R ∝ L/A. Doubling length halves area (constant volume), so R multiplies by 4 → 16 Ω.
9For wire sizing estimates, current-carrying capacity mainly increases when the conductor:
A.Cross-sectional area increases
B.Length increases
C.Insulation colour changes
D.Ambient temperature rises sharply
Explanation: Larger cross-section lowers resistance and heating for a given current, raising ampacity (other factors equal).
10A single-phase circuit supplies 2.3 kW at 230 V with unity power factor. Approximate line current is:
A.1 A
B.10 A
C.100 A
D.0.1 A
Explanation: At unity pf, I = P/V = 2300/230 = 10 A.

About the Maharashtra HSC Electrical Maintenance (Bifocal) Practice Questions

Verified exam format metadata for Maharashtra Higher Secondary Certificate (HSC / Class 12) Bifocal Electrical Maintenance under the Maharashtra State Board of Secondary and Higher Secondary Education (MSBSHSE), Pune — board subject code A1 is pending. The practice questions above remain available while official exam length, timing, passing score, fee, and administrator details are reviewed.