100+ Free HK Confined Space Certified Worker Practice Questions
Pass your Safety Training Course for Certified Workers of Confined Spaces Operation exam on the first try — instant access, no signup required.
Loading practice questions...
Explore More Hong Kong Mandatory Construction Safety Training
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
Sample HK Confined Space Certified Worker Practice Questions
Try these sample questions to test your HK Confined Space Certified Worker exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1Under the Factories and Industrial Undertakings (Confined Spaces) Regulation, a confined space is primarily defined as any place which, by virtue of its enclosed nature, has which feature?
2Which of the following is listed in the Confined Spaces Regulation as an example of a place that may be a confined space when a specified risk arises?
3Why are tanks, boilers and pressure receivers commonly treated as potential confined spaces?
4A construction worker must enter a deep excavation shaft with limited means of entry and exit where a hazardous atmosphere is reasonably foreseeable. How should this place be treated under Hong Kong confined-space rules?
5Which statement best describes a key characteristic that makes a workplace a confined space concern?
6Which Hong Kong workplace example is MOST likely to be a confined space under Cap. 59AE?
7A silo used to store bulk materials can become a confined space because workers inside may face which combination of risks?
8Which statement about "specified risk" in the confined-space definition is correct?
9Compared with an open outdoor worksite, a confined space typically increases danger because:
10A pipe, flue or tunnel may be a confined space even if workers enter only briefly, because:
About the HK Confined Space Certified Worker Exam
The Safety Training Course for Certified Workers of Confined Spaces Operation is the Labour Department-recognised mandatory safety training that qualifies a person aged 18 or above to enter and work in a confined space as a certified worker under Cap. 59AE. The common syllabus covers the nature of confined spaces, legal duties, atmospheric and physical hazards, gas monitoring, permit-to-work and safe procedures, PPE and breathing apparatus, emergency rescue, and the certified worker's own duties. The Labour Department's Code of Practice for Safety and Health at Work in Confined Spaces provides the practical guidance assessed in training.
Assessment
Labour Department-recognised Safety Training Course for Certified Workers of Confined Spaces Operation under the Factories and Industrial Undertakings (Confined Spaces) Regulation. Assessment is set by each approved provider and typically combines a written knowledge test with practical checks on PPE, breathing apparatus and rescue equipment. 100% attendance is commonly required before a certificate is issued.
Time Limit
Initial course length is set by the approved provider under LD course-approval rules. Many centres historically ran about an 8-hour day course; after LD refined mandatory confined-space training (extended duration), some providers advertise programmes around 12 hours of theory/hands-on plus a separate practical examination. Confirm exact timetable and written-exam duration with your provider.
Passing Score
Pass criteria are set by the approved provider. Typical requirements are 100% attendance plus a pass in the written assessment and, where required, the practical examination. Some centres publish an indicative score such as about 75% of total marks. Confirm the exact pass mark for your sitting.
Exam Fee
Fees are set by each Labour Department-recognised provider and change periodically. Published examples from recognised centres have ranged roughly from about HK$400 to about HK$980+ for the certified-worker course. Confirm the current fee when you enrol. (Commissioner for Labour (course recognition); certificates issued by Labour Department-recognised training providers)
HK Confined Space Certified Worker Exam Content Outline
Nature & Types of Confined Spaces
Legal definition, enclosed nature, specified risk, and common confined-space examples.
Legislative Requirements
F&IU Confined Spaces Regulation, CoP, and duties of proprietors, competent persons and workers.
Hazards Identification & Accident Prevention
Atmospheric, chemical and physical hazards and how accidents are prevented.
Atmospheric Testing & Gas Monitoring
Test order, O₂/LEL/toxics, continuous monitoring and meter use.
Permit-to-Work & Safe Work Procedures
Risk assessment, isolation, PTW certificate, standby person and entry controls.
PPE, Breathing Apparatus & Safety Equipment
Approved BA, escape sets, PPE, life lines and related safety equipment.
Emergency Procedures & Rescue
Emergency plans, standby response, rescue equipment and non-entry rescue principles.
Duties of the Certified Worker
Certification rules, following procedures, equipment care and role boundaries.
How to Pass the HK Confined Space Certified Worker Exam
What You Need to Know
- Passing score: Pass criteria are set by the approved provider. Typical requirements are 100% attendance plus a pass in the written assessment and, where required, the practical examination. Some centres publish an indicative score such as about 75% of total marks. Confirm the exact pass mark for your sitting.
- Assessment: Labour Department-recognised Safety Training Course for Certified Workers of Confined Spaces Operation under the Factories and Industrial Undertakings (Confined Spaces) Regulation. Assessment is set by each approved provider and typically combines a written knowledge test with practical checks on PPE, breathing apparatus and rescue equipment. 100% attendance is commonly required before a certificate is issued.
- Time limit: Initial course length is set by the approved provider under LD course-approval rules. Many centres historically ran about an 8-hour day course; after LD refined mandatory confined-space training (extended duration), some providers advertise programmes around 12 hours of theory/hands-on plus a separate practical examination. Confirm exact timetable and written-exam duration with your provider.
- Exam fee: Fees are set by each Labour Department-recognised provider and change periodically. Published examples from recognised centres have ranged roughly from about HK$400 to about HK$980+ for the certified-worker course. Confirm the current fee when you enrol.
Keys to Passing
- Complete 500+ practice questions
- Score 80%+ consistently before scheduling
- Focus on highest-weighted sections
- Use our AI tutor for tough concepts
HK Confined Space Certified Worker Study Tips from Top Performers
Frequently Asked Questions
Who can enter a confined space as a certified worker in Hong Kong?
Under the Factories and Industrial Undertakings (Confined Spaces) Regulation, only certified workers may enter or work in a confined space. A certified worker must be at least 18 years old and hold a valid certificate issued by a training provider authorised by the Commissioner for Labour after successfully completing an approved Safety Training Course for Certified Workers of Confined Spaces Operation.
How is the Certified Worker course assessed?
Assessment is set by each Labour Department-recognised provider. Typical requirements are 100% attendance plus a pass in a written knowledge test and, on many current courses, a practical examination covering PPE, breathing apparatus and rescue equipment. Exact question counts, timing and pass marks are not published as a single Labour Department figure — confirm with your training centre.
What oxygen levels does the Hong Kong Code of Practice require before entry?
The Labour Department Code of Practice for Safety and Health at Work in Confined Spaces states that the percentage of oxygen in air in a confined space should not be less than 19.5% by volume nor greater than 22% by volume at normal atmospheric pressure. Oxygen is generally tested first because many combustible-gas meters need adequate oxygen to give reliable readings.
How long is the Certified Worker certificate valid?
Validity is set under Labour Department-approved course rules. After LD refined mandatory confined-space training (updated content, longer courses, shorter certificate validity), many recognised providers issue certificates valid for 2 years from completion. Some older provider pages still mentioned 3 years. Check the validity printed on your certificate and complete revalidation before expiry (or within the provider's allowed post-expiry window, often about 3 months).