Free Practice Questions for Type B Gasfitting (VIC)
Exam-style questions and explanations by OpenExamPrep.
Loading practice questions...
Explore More Australian Trade Licences & Certificate III
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
Key Facts: Type B Gasfitting (VIC) Exam
100
Practice Questions
OpenExamPrep
10 MJ/h
Type B input threshold (over)
Energy Safe Victoria
AS 3814
Type B appliance standard
Standards Australia
2 years
Minimum provisional registration
VBA
Open book
Reference materials permitted
VBA
~10 days
Type B acceptance processing
Energy Safe Victoria
The Victorian Type B Gasfitting licence is an advanced gasfitting class for complex gas work on Type B appliances — gas-fired plant with an input above 10 MJ/h such as commercial and industrial boilers, furnaces, kilns and process heaters. Registration is administered through the Victorian Building Authority / Building and Plumbing Commission and requires a minimum of two years' Provisional Registration plus an open-book registration assessment in which relevant reference materials (AS/NZS 5601.1, AS 3814 and AS 2593) are permitted. Type B appliances are governed by AS 3814 for the appliance and AS/NZS 5601.1 for the installation, and gas must not be connected until Energy Safe Victoria grants acceptance under its gas acceptance scheme (Schedule 9, lodged via GasTrac). Content spans Type B appliances and safety systems, combustion, flueing and ventilation, testing, purging and commissioning, gas pressures and regulation, gas properties, and Victorian gas safety legislation. This free prep includes 100 research-based practice questions with explanations and an AI tutor.
Sample Type B Gasfitting (VIC) Practice Questions
Try these sample questions to review concepts for the Type B Gasfitting (VIC) exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1Under the Victorian framework, a gas appliance is classified as Type B when its gas consumption exceeds which energy input, provided it is not a Type A appliance?
2Which Australian Standard sets out the requirements for the design, construction and safe operation of industrial and commercial (Type B) gas-fired appliances?
3Which standard governs the installation (consumer piping, connection and commissioning of the installation) of a Type B appliance in Victoria?
4Before gas may be connected to a new Type B appliance in Victoria, what must be obtained from Energy Safe Victoria?
5Which document accompanies an Application for Acceptance for a new, modified or relocated Type B appliance, providing the additional technical information Energy Safe Victoria requires?
6In Australia, the nominal supply (test point) pressure for natural gas at a domestic/commercial appliance is approximately:
7The nominal supply (test point) pressure for LP Gas at an appliance in Australia is approximately:
8Natural gas (predominantly methane) has a specific gravity relative to air of approximately:
9LP Gas (propane) has a specific gravity relative to air of approximately 1.5. The most important safety implication of this is that LP Gas:
10The flammability (explosive) range of natural gas in air is approximately:
About the Type B Gasfitting (VIC) Exam
The Victorian Type B Gasfitting licence authorises advanced, complex gas installation work on Type B appliances — large commercial and industrial gas appliances with a gas input above 10 MJ/h, such as boilers, furnaces, kilns and process heaters. Candidates must hold Provisional Registration for at least two years and pass an open-book registration assessment built on AS/NZS 5601.1, AS 3814 and AS 2593, and work on Type B appliances requires acceptance from Energy Safe Victoria before gas is connected.
Exam sponsor: Victorian Building Authority (VBA) / Building and Plumbing Commission, with Energy Safe Victoria as gas safety regulator. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.
Assessment
Open-book Building and Plumbing Commission (BPC) registration assessment grounded in AS/NZS 5601.1, AS 3814 and AS 2593, plus practical assessment of complex gas work; this practice bank is 100 selected-response items
Time Limit
Set by the assessment provider
Passing Score
Competency standard set by the assessing body
Exam / Certification Fees
VBA/Building and Plumbing Commission assessment fees (Energy Safe Victoria gas acceptance fees are separate)
Exam sponsor websiteFees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.
Our practice resources: topics covered
We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.
Type B Appliances & AS 3814
Type B definition (input over 10 MJ/h), AS 3814 and AS 2593, burner control trains, flame safeguards, valve proving and double block and bleed
Combustion, Flueing & Ventilation
Complete vs incomplete combustion, carbon monoxide, flue draught and spillage, common flues, plant-room ventilation, combustion air and gas interlocks
Testing, Purging & Commissioning
Tightness and strength testing, let-by tests, purging (including nitrogen), gas rate, combustion analysis and the commissioning sequence
Gas Safety Legislation (Victoria)
Gas Safety (Gas Installation) Regulations 2018, prescribed standards, compliance certificates, unsafe-situation procedures and safe isolation
ESV Gas Acceptance Scheme
Energy Safe Victoria acceptance for complex and Type B work, GasTrac, Schedule 9, Type B inspectors, processing times and documentation
Gas Pressures & Regulation
NG/LPG supply pressures, regulators and lock-up, two-stage LPG regulation, boosters, over-pressure protection and standing vs working pressure
Gas Properties (NG & LPG)
Specific gravity, calorific value, flammable range, Wobbe Index, odorant and heavier-than-air LP Gas hazards
Consumer Piping & AS/NZS 5601.1
Pipe sizing, equivalent length, materials and support, isolation valves, concealed pipework and Type B scope of work
Preparing for the Type B Gasfitting (VIC) Exam
What You Need to Know
- Passing score: Competency standard set by the assessing body
- Assessment: Open-book Building and Plumbing Commission (BPC) registration assessment grounded in AS/NZS 5601.1, AS 3814 and AS 2593, plus practical assessment of complex gas work; this practice bank is 100 selected-response items
- Time limit: Set by the assessment provider
- Exam / certification fees: VBA/Building and Plumbing Commission assessment fees (Energy Safe Victoria gas acceptance fees are separate) Official sources
Using Our Practice Resources
- Work through all 100 available questions
- Review every answer and explanation
- Track weak areas and revisit them
- Use our AI tutor for tough concepts
Type B Gasfitting (VIC): Suggested Study Strategy
Frequently Asked Questions
What is a Type B gas appliance in Victoria?
A Type B appliance is a gas appliance with a gas consumption above 10 MJ/h that is not a Type A appliance (Type A units are covered by an authorised acceptance scheme). Type B appliances are large commercial and industrial gas-fired plant such as boilers, furnaces, kilns and process heaters.
What standards apply to Type B gasfitting work?
The appliance itself is assessed against AS 3814 (industrial and commercial gas-fired appliances), and the gas installation supplying it is installed under AS/NZS 5601.1. AS 2593 applies to boiler safety management. AS/NZS 5601.1 and 5601.2 are prescribed under the Gas Safety (Gas Installation) Regulations 2018.
Do I need Energy Safe Victoria acceptance before connecting gas to a Type B appliance?
Yes. An Application for Acceptance (with a Schedule 9 for new, modified or relocated Type B appliances) must be lodged through GasTrac and acceptance granted by Energy Safe Victoria before gas is connected. Type B appliance applications are typically processed within about 10 working days.
What are the eligibility requirements for the Type B Gasfitting class?
Applicants must hold Provisional Registration for a minimum of two years (initially 12 months, then renewed for a further 12 months) and demonstrate competency in complex gas work, then complete the relevant Building and Plumbing Commission registration assessment.
Is the Type B Gasfitting registration exam open book?
Yes. Candidates are permitted to bring relevant reference materials, including AS/NZS 5601.1, AS 3814 and AS 2593, so fast and accurate navigation of the standards is as important as underlying knowledge. The registration process also includes a practical assessment.
Is this free Type B gasfitting practice as good as paid prep?
Our 100 practice questions cover the full Type B content areas — appliances and AS 3814, combustion and flueing, testing and commissioning, gas pressures, gas properties, legislation and the ESV acceptance scheme — with a teaching explanation for every answer plus free daily AI tutor interactions. All content is free forever and updated for 2026.