Free CSFA Exam Flashcards
Memorize 50 essential terms and definitions for the NBSTSA Certified Surgical First Assistant. See the term, recall the definition, then flip to check yourself.
What three confirmations must the entire surgical team verbally complete during the Time-Out, immediately before incision?
Correct patient identity, correct surgical site/side, and correct procedure — required by the Universal Protocol to prevent wrong-patient, wrong-site, and wrong-procedure surgery.
Filter by Topic
Jump to Card
About These CSFA Flashcards
These 50 flashcards are designed to help you memorize key terms and definitions for the NBSTSA Certified Surgical First Assistant. Each card shows a term on the front and its definition on the back—the classic flashcard format for vocabulary memorization. Use these alongside our practice questions to build both recall and comprehension.
Topics Covered
Complete Flashcard Reference
Review every term in this set. Open any term to reveal its definition.
What three confirmations must the entire surgical team verbally complete during the Time-Out, immediately before incision?
Correct patient identity, correct surgical site/side, and correct procedure — required by the Universal Protocol to prevent wrong-patient, wrong-site, and wrong-procedure surgery.
What three factors should guide suture selection for a given wound, per the CSFA content outline?
The intended usage/purpose of the closure, the tissue type being sutured, and the specific characteristics of the wound (tension, contamination, cosmetic priority) — not habit or availability alone.
What determines the application pattern and drying time for a surgical skin prep?
Follow the antiseptic's instructions for the site and applicator. For example, some chlorhexidine-alcohol applicators use repeated back-and-forth strokes. Let the treatment area dry as directed.
What philosophy do Halsted's Principles of surgery embody for a first assistant handling tissue?
Gentle tissue handling, meticulous hemostasis, preservation of blood supply, strict asepsis, precise tissue apposition, minimal tension, and elimination of dead space.
How does applying traction and counter-traction assist tissue dissection?
Opposing tension is placed on tissue from two directions to create a taut, visible dissection plane, letting the surgeon separate structures cleanly with less inadvertent injury to surrounding anatomy.
How does monopolar electrosurgery complete its circuit, and what can happen if current takes an unintended path?
Current travels from the active electrode through the patient and returns to the generator via the return electrode. Unintended current paths can cause alternate-site burns.
How does bipolar electrosurgery localize current?
Current passes through the tissue between the two instrument tips. A separate patient return electrode is unnecessary. Nearby structures can still be injured by heat.
What should the team check when selecting a site for an adhesive monopolar return electrode?
Use the device instructions. Select intact skin over an appropriate well-perfused area with full pad contact. Avoid locations the manufacturer excludes, such as bony prominences.
What are the two primary methods of PERMANENT surgical hemostasis for a clamped vessel?
Ligation (tying off the vessel with suture) and applying a mechanical hemostatic clip — both provide lasting occlusion, unlike temporary measures.
Name three temporary methods of surgical hemostasis and one precaution for tourniquet use.
Direct pressure, a vessel loop for temporary vascular control, and a pneumatic tourniquet. Keep inflation time as short as possible and follow the team’s patient-specific plan.
When are topical hemostatic agents like Surgicel or Gelfoam chosen over ligation?
Topical agents may supplement conventional hemostasis for diffuse oozing when there is no discrete vessel to ligate. Choose an agent for the bleeding site and use its labeling. Some gelatin sponges can be used with thrombin.
What makes a taper point needle suitable for closing fascia or bowel?
A taper-point needle has a round body that separates tissue fibers with minimal cutting. It is a common option for bowel and for fascia that it can penetrate without excessive force.
How does a reverse-cutting needle differ from a conventional cutting needle, and what is each used for?
Both have triangular, sharp-edged bodies for tough tissue like skin; a conventional cutting needle has its cutting edge on the inner curvature (risking suture pull-through), while a reverse-cutting needle places it on the outer curvature, reducing that risk — commonly preferred for skin closure.
What is the key handling trade-off between monofilament and braided suture?
Monofilament usually has less tissue drag and fewer spaces for bacterial adherence. Braided material generally handles and knots more easily. Tensile strength depends on the material and size.
Give one example each of an absorbable and a non-absorbable suture, and the general rule for choosing between them.
Polyglactin 910 and polydioxanone are absorbable. Nylon and polypropylene are nonabsorbable. Choose for the tissue and its required support time. External nonabsorbable skin sutures are generally removed after healing.
In USP suture sizing, does a higher number of zeros (e.g., 5-0 vs 2-0) mean a thicker or thinner strand?
Thinner. More zeros means a smaller diameter suture (5-0 is finer than 2-0) — fine sutures are used for delicate tissue like vessels or skin, thicker sutures for high-tension closures like fascia.
Which mattress pattern is commonly used to evert skin edges?
A vertical mattress suture has a wider, deeper pass and a narrower, superficial return pass. The superficial bites help turn the skin edges outward.
Why might a surgeon choose a running LOCKED suture pattern over a simple running pattern?
Each loop locks into the prior stitch, adding compressive tension along the wound edge — useful for hemostasis in a bleeding tissue plane, though it can compromise blood supply if pulled too tight.
Distinguish primary, secondary, and tertiary intention wound healing.
Primary intention: the wound edges are approximated at closure. Secondary intention: the wound heals while open by granulation, contraction, and epithelialization. Tertiary intention: the wound is initially left open and closed later when suitable.
What surgical tasks do linear vs. intraluminal (circular) stapling devices perform?
A linear stapler places straight rows of staples. A linear cutting stapler also divides tissue. A circular stapler creates a circular staple line for an anastomosis, such as a colorectal connection.
Why would a first assistant choose a Bookwalter retractor over a handheld Army-Navy retractor?
The Bookwalter is a table-mounted, self-retaining system built for deep, sustained abdominal exposure without tiring an assistant's hands; the Army-Navy is a simple handheld retractor suited to small, superficial wounds needing brief retraction.
How does a Penrose drain differ from a Jackson-Pratt drain in mechanism and typical use?
A Penrose drain is open and passive, wicking fluid by gravity/capillary action from a superficial space; a Jackson-Pratt drain is a closed system using a compressible bulb to create active suction, suited to deeper spaces where measurable output matters.
What events commonly prompt an instrument, sharps, or sponge count?
An initial baseline, applicable cavity and wound closure stages, and personnel handoffs are common triggers. Track items added during the case. The team follows its facility’s count procedure for the item and operation.
What does the insufflator do during laparoscopy, and how is the operating pressure chosen?
It maintains a CO₂ pneumoperitoneum for visualization and working space. The team uses the lowest pressure that provides adequate exposure for the operation and the patient’s physiology.
What must happen to a surgical wound before a sterile dressing is applied?
The wound is cleaned and prepared — excess blood and debris removed and surrounding skin addressed — so the dressing chosen (dry gauze, negative-pressure therapy, etc.) matches the wound's drainage and healing needs.
How do location and tension affect the timing of skin suture or staple removal?
Thin, well-perfused skin such as the face often allows earlier removal. Higher-tension sites generally need longer support. Follow the postoperative plan and assess healing before removal.
What is the CSFA's responsibility during a patient's emergence from anesthesia?
Ensure the patient's safety and privacy — removing drapes, cords, and instruments from the patient, guarding against fall or self-extubation injury, and maintaining dignity through transfer out of the OR.
What defines the legal boundary of a CSFA's scope of practice in the operating room?
State law, facility credentialing and policy, and the supervising surgeon’s delegation define the role. First assistants work within their authorized privileges under the surgeon’s direction.
What are the three elements of the OR fire triangle, and how is fire risk reduced during a procedure?
An oxidizer such as oxygen or nitrous oxide, fuel such as alcohol prep or drapes, and an ignition source such as electrosurgery or a laser. Let flammable prep dry completely and coordinate ignition-source use and oxygen delivery with anesthesia.
What example steam exposure does CDC list for wrapped supplies in a gravity-displacement sterilizer?
30 minutes at 121°C (250°F) for the specified wrapped load. Select the validated cycle for the device, packaging, sterilizer, and load.
How does prevacuum steam sterilization improve on gravity displacement?
A pump or ejector removes air before steam enters, improving penetration. CDC lists a 4-minute exposure at 132°C (270°F) for a specified wrapped prevacuum load. Cycle and drying times depend on the validated load.
When is ethylene oxide (EtO) gas sterilization used instead of steam?
Ethylene oxide is a low-temperature option for compatible devices that cannot withstand heat or moisture. Follow the validated process and aeration requirements before release.
What does the Bowie-Dick test verify, and how often is it performed?
It checks air removal and steam penetration. Run the specified empty-chamber test before the first load on each day the dynamic-air-removal sterilizer is used.
What does a Type 5 integrating chemical indicator show?
The indicator reached its endpoint in response to the critical variables of its specified process. The result is one part of load monitoring and does not prove sterility.
What are the borders of the hepatocystic triangle used in the critical view of safety?
The cystic duct, common hepatic duct, and inferior liver edge. Identifying the cystic duct and artery safely also requires the other critical-view criteria, including exposure of the lower cystic plate and confirmation that only two structures enter the gallbladder.
What are the boundaries of Hesselbach's triangle, and which type of hernia passes through its floor?
Bounded by the inferior epigastric vessels laterally, the rectus sheath edge medially, and the inguinal ligament inferiorly; a direct inguinal hernia pushes through this triangle's floor, medial to the epigastric vessels.
How does an indirect inguinal hernia's path differ from a direct hernia's?
An indirect hernia enters the deep inguinal ring lateral to the inferior epigastric vessels and follows the inguinal canal. A direct hernia protrudes through the posterior wall within Hesselbach's triangle, medial to those vessels.
Moving lateral to medial, what does the NAVEL mnemonic list for femoral triangle contents?
Lateral to medial: femoral Nerve, Artery, Vein, and the femoral canal, remembered by Empty space and Lymphatics. The canal contains loose tissue and lymphatics.
Why is the recurrent laryngeal nerve a key structure to protect during thyroid or parathyroid surgery?
The recurrent laryngeal nerve supplies most intrinsic laryngeal muscles. Injury may impair vocal fold movement. Bilateral injury can threaten the airway. The nerve is at risk near the inferior thyroid artery and ligament of Berry.
What is the functional purpose of the Circle of Willis?
It connects the anterior and posterior cerebral circulations through communicating arteries, providing collateral blood flow that can maintain brain perfusion if one contributing vessel becomes occluded.
What does the SITS mnemonic identify, and why does it matter for shoulder procedures?
The four rotator cuff muscles — Supraspinatus, Infraspinatus, Teres minor, Subscapularis — which stabilize the humeral head in the glenoid; recognizing each is essential for shoulder arthroscopy and repair assisting.
What changes in the rectus sheath's structure at the arcuate line, and why does it matter for abdominal closure?
The posterior rectus sheath ends at the arcuate line. Below it, the flat abdominal muscle aponeuroses pass anterior to rectus, with transversalis fascia directly behind the muscle.
What proportion of the liver's blood supply comes from the portal vein versus the hepatic artery?
The portal vein supplies about three-quarters of liver blood flow. The hepatic artery supplies about one-quarter and carries oxygen-rich blood, including the arterial supply important to the bile ducts.
How do the territories supplied by the celiac trunk and the superior mesenteric artery (SMA) differ?
The celiac trunk supplies foregut derivatives — stomach, spleen, liver, and proximal duodenum; the SMA supplies midgut structures from the distal duodenum through the proximal two-thirds of the transverse colon.
At what vertebral level is the esophageal hiatus located, and what passes through it?
T10 is the usual landmark. The esophagus and the anterior and posterior vagal trunks pass through the opening.
Why are displaced intracapsular femoral neck fractures at higher risk of avascular necrosis than extracapsular (intertrochanteric) fractures?
Retinacular branches, supplied mainly by the medial femoral circumflex artery, run along the femoral neck. A displaced intracapsular fracture can disrupt them. Intertrochanteric fractures generally carry less risk of femoral head osteonecrosis.
Why is it useful to distinguish S. aureus from MRSA when thinking about surgical site infections?
S. aureus is a common cause of SSI. Methicillin-resistant S. aureus resists most beta-lactams. Likely pathogens and treatment depend on the operation, culture results, and susceptibility findings.
What do the four surgical wound classes describe?
Clean, clean-contaminated, contaminated, and dirty or infected. The classes describe operative contamination and help assess infection risk. Other clinical factors also guide prophylaxis and closure decisions.
What is malignant hyperthermia, and what is the immediate first-line treatment?
A hypermetabolic crisis triggered in susceptible patients by volatile anesthetics or succinylcholine. Rising end-tidal CO₂, tachycardia, and rigidity can appear before marked hyperthermia. Stop triggering agents and activate the crisis protocol promptly. IV dantrolene is the specific treatment.
Which drugs help reverse unfractionated heparin and warfarin?
Protamine neutralizes unfractionated heparin. Vitamin K restores synthesis of vitamin K-dependent clotting factors after warfarin. Major warfarin bleeding also requires rapid factor replacement, typically with four-factor prothrombin complex concentrate.
Frequently Asked Questions
How many questions are on the CSFA exam and how much time do I get?
The CSFA exam has 175 total multiple-choice questions: 150 scored and 25 unscored pretest items used only for statistical analysis. You get 4 hours to complete the computer-based exam at a PSI test center, and pretest items are indistinguishable from scored ones during testing.
What score do I need to pass the CSFA exam?
You must answer 99 of the 150 scored questions correctly, which is 66%. The 25 unscored pretest items do not count toward your score, so treat every question on the exam as if it counts.
What happens if I fail the CSFA exam, and how soon can I retest?
NBSTSA allows a new application immediately after an unsuccessful attempt. It requires a fresh authorization and the retake fee for each attempt. Candidates may take the exam up to three times in a calendar year.
What is the CSFA pass rate?
NBSTSA reports national first-time CSFA pass rates of 62% in 2025, 71.2% in 2024, and 78.2% in 2023.
How long is CSFA certification valid, and how do I renew it?
CSFA certification runs on a two-year cycle. The continuing education route requires 38 qualifying credits, including eight live credits, plus the renewal application. NBSTSA also offers renewal by examination. The CE reporting portal changes January 5, 2027.
What are the CSFA content domains and their official weights?
Perioperative Care is 55% of the exam (83 of 150 scored items): Preoperative Preparation (8 items), Intraoperative Procedures (67 items, by far the largest single section), and Postoperative Procedures (8 items). Ancillary Duties is 14% (21 items: Administrative/Personnel 6, Equipment Sterilization/Maintenance 15). Basic Science is 31% (46 items: Advanced Anatomy/Physiology 36, Advanced Principles of Microbiology 5, Surgical Pharmacology and Anesthesia 5).
Explore More NBSTSA Surgical Technologist Certifications
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.