What does the N endorsement authorize on a Texas CDL or CLP?
Texas Federal Endorsement Rules
Question · Easy
Best Reflective Warning Triangles for CDL Pre-Trip Inspection Test 2026
Complete guide to DOT-approved reflective warning triangles for the CDL pre-trip inspection skills test in 2026. FMCSA 49 CFR 392.22 placement rules, 5 top-rated 3-packs compared, and why you must carry them after getting your CDL.
Blog
Under the Texas Commercial Motor Vehicle Drivers Handbook, does tank cargo have to be hazardous for the tank endorsement requirement to apply?
Chapter 1: Overview & Regulatory Requirements
1.1 Federal Tank Vehicle Definition & When the N Endorsement Applies
Study guide
Which tank threshold language is used in the Texas handbook for many Class A or B tank vehicle situations?
What is liquid surge?
Liquid Surge
When is liquid surge usually most noticeable?
Why should a Texas tanker driver leave extra following distance?
Braking Curves Speed Control
1.2 Endorsement Codes, Knowledge Testing & Licensing Rules (N, H, X)
What should a tanker driver do before entering a curve or ramp?
What is outage, also called ullage?
Outage Ullage Loading
Why are tanks not loaded completely full with many liquids?
What do baffles do inside a tank?
Baffles Bulkheads Smooth Bore
1.3 Product Density, Legal Weight Limits & How Much to Load
What is a smooth-bore tank?
How are bulkheads different from baffles?
Why are tank vehicles prone to roll over?
Rollover Center Gravity
Which driving input is safest for tank vehicles?
Chapter 2: Tank Construction & Cargo Surge
2.1 Liquid Surge: Causes, Effects & Prevention
Before loading, unloading, or driving a tanker, what does the Texas handbook tell drivers to do?
Tank Vehicle Inspection
Which item is tank-specific during inspection?
What should you do if you find a leaking tank valve before departure?
What does 49 CFR 383.119 require tanker applicants to know about cargo surge?
2.2 Baffled vs. Smooth Bore (Unbaffled) Tanks
What is the federal minimum passing score for CDL knowledge tests under 49 CFR 383.135?
Which endorsement combination is generally reflected by X?
Does FMCSA ELDT list the Tank Vehicles N endorsement alone as a first-time endorsement requiring ELDT?
What should be checked on hoses used in loading or unloading?
Loading Unloading Transfer Safety
2.3 Bulkheads, Multi-Compartment Tanks & Weight Distribution
What should a driver verify about the product before loading?
Why can dense liquids create weight problems before a tank is physically full?
What is the safest basic response to a curve warning sign in a tanker?
What is the main handling concern with side-to-side liquid movement?
Chapter 3: Outage, Center of Gravity & Loading Operations
3.1 Outage (Ullage) & Thermal Expansion
What should be done with manhole covers and fill openings before travel?
Which source is the primary Texas study source for the tanker endorsement knowledge test?
What does a portable tank or IBC issue mainly affect under FMCSA guidance?
What should a driver do after unloading before leaving the site?
3.2 High Center of Gravity & Rollover
A Texas CDL driver carries four 300-gallon liquid totes secured to a flatbed. Which endorsement issue is most relevant?
Question · Medium
A driver hauling a half-full smooth-bore tank approaches a red light. Which technique best controls surge?
Why can a partially loaded tank be harder to control than a full tank?
A baffled tank still rolls over on a ramp. Which statement best explains why baffles did not prevent it?
3.3 Loading & Unloading: Valves, Bonding, Vapor Recovery & Attendance
A tank has separate compartments divided by bulkheads. What loading concern is most important?
What is the most accurate statement about outage requirements?
A Texas tanker driver is descending a long grade. Which practice best fits tanker safety?
During pre-trip inspection, why are vents and pressure-relief devices important?
Loading more…