FREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First Try
Video
What is the first step in the seven-step pre-trip inspection method?
Cdl Vehicle Inspection
Question · Easy
Best High-Visibility Safety Vests for Construction, CDL & OSHA 30 in 2026
Complete guide to ANSI Class 2 high-visibility safety vests for OSHA 30, CDL skills test, and construction certification candidates. Covers ANSI/ISEA 107 visibility classes, OSHA 29 CFR 1926.201 requirements, FHWA MUTCD flagger standards, breakaway vs zipper-front designs, and reflective strip specifications in 2026.
Blog
CDL Classes (A, B, C)
General Knowledge
Flashcard
During a pre-trip inspection, what should you check in the engine compartment?
Chapter 1: CDL Overview, CLP, and Federal Licensing Regulations
1.1 CDL Classes, Endorsements, Restrictions, and Testing Architecture (49 CFR Part 383)
Study guide
When performing a pre-trip inspection, the driver should ensure that the steering wheel free play (lash) does not exceed what limit?
Question · Medium
GVWR vs GCWR
During the cab check portion of a pre-trip inspection, you should test the parking brake by:
Best Reflective Warning Triangles for CDL Pre-Trip Inspection Test 2026
Complete guide to DOT-approved reflective warning triangles for the CDL pre-trip inspection skills test in 2026. FMCSA 49 CFR 392.22 placement rules, 5 top-rated 3-packs compared, and why you must carry them after getting your CDL.
A post-trip inspection report is important because:
Free CDL study guide for 2026 covering General Knowledge format, ELDT rules, high-yield topics, and a practical plan to pass and launch a driving career.
Hours of Service (HOS) - 11-Hour Rule
During a pre-trip inspection, the driver notices a coolant leak near the water pump. What should the driver do?
1.2 Entry-Level Driver Training (ELDT) and the Training Provider Registry (49 CFR Part 380)
Which of the following is an out-of-service condition that would prevent a vehicle from being driven?
Question · Hard
Hours of Service - 14-Hour Rule
During the pre-trip inspection, which of the following should a driver check regarding the exhaust system?
What is the minimum tread depth required for steer axle tires on a commercial motor vehicle?
30-Minute Rest Break Requirement
What is the minimum tread depth required for tires on drive and trailer axle positions?
1.3 Commercial Learner's Permit (CLP) Rules and Driver Disqualifications
When inspecting slack adjusters on an S-cam brake system, the pushrod stroke at the brake chamber should not exceed what general limit?
60/70-Hour Limit
During a tire inspection, you notice a bulge on the sidewall of one of the steer tires. What should you do?
What is the purpose of the brake drum inspection during a pre-trip?
Entry-Level Driver Training (ELDT)
When checking air brake lines during a pre-trip inspection, the driver should look for:
1.4 Medical Self-Certification Categories, Other CDL Rules, and the International Registration Plan
Recapped or retreaded tires are NOT permitted on which axle position of a commercial motor vehicle?
Commercial Learner's Permit (CLP)
When inspecting suspension components during a pre-trip, what defects should a driver look for on the leaf springs?
A tire on a dual wheel assembly is found to be flat during inspection. What should the driver do?
Out-of-Service Violations
When should you place your reflective triangles after stopping on the road due to a breakdown?
Chapter 2: Vehicle Inspection and Maintenance
2.1 The Seven-Step Pre-Trip Inspection Method
How should you adjust your mirrors on a commercial motor vehicle?
Driver Vehicle Inspection Report (DVIR)
During a pre-trip inspection, you discover that one of the rear identification lights (the three red lights at the top rear of the trailer) is burned out. What action should you take?
When turning right with a large commercial vehicle, the correct technique is to:
Cdl Vehicle Control
Air Brake System Components
Air Brakes
A vehicle with a high center of gravity is more likely to:
2.2 Critical Safety Components: Steering, Suspension, Brakes, and Tires
When should a driver downshift?
Air Compressor and Governor
When driving a commercial vehicle, the driver should be aware that the vehicle's total stopping distance at highway speed is significantly greater than a passenger car. At 55 mph, the total stopping distance for a fully loaded tractor-trailer on dry pavement is approximately:
What is the proper RPM range for shifting gears in most commercial diesel engines?
Air Brake Lag Time
Loading more…