FREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First Try
Video
What is the first step in the seven-step pre-trip inspection method?
Vehicle Inspection
Question · Easy
POV: the turn is tighter than it looks
Short
Best High-Visibility Safety Vests for Construction, CDL & OSHA 30 in 2026
Complete guide to ANSI Class 2 high-visibility safety vests for OSHA 30, CDL skills test, and construction certification candidates. Covers ANSI/ISEA 107 visibility classes, OSHA 29 CFR 1926.201 requirements, FHWA MUTCD flagger standards, breakaway vs zipper-front designs, and reflective strip specifications in 2026.
Blog
CDL Classes (A, B, C)
General Knowledge
Flashcard
During a pre-trip inspection, what should you check in the engine compartment?
Chapter 1: CDL Overview, CLP, and Federal Licensing Regulations
1.1 CDL Classes, Endorsements, Restrictions, and Testing Architecture (49 CFR Part 383)
Study guide
Which emergency equipment is required to be on a commercial motor vehicle?
GVWR vs GCWR
During a pre-trip inspection, the driver notices a coolant leak near the water pump. What should the driver do?
Best Reflective Warning Triangles for CDL Pre-Trip Inspection Test 2026
Complete guide to DOT-approved reflective warning triangles for the CDL pre-trip inspection skills test in 2026. FMCSA 49 CFR 392.22 placement rules, 5 top-rated 3-packs compared, and why you must carry them after getting your CDL.
What is the minimum tread depth required for steer axle tires on a commercial motor vehicle?
Free CDL study guide for 2026 covering General Knowledge format, ELDT rules, high-yield topics, and a practical plan to pass and launch a driving career.
Hours of Service (HOS) - 11-Hour Rule
What is the minimum tread depth required for tires on drive and trailer axle positions?
1.2 Entry-Level Driver Training (ELDT) and the Training Provider Registry (49 CFR Part 380)
During a tire inspection, you notice a bulge on the sidewall of one of the steer tires. What should you do?
Hours of Service - 14-Hour Rule
How should you adjust your mirrors on a commercial motor vehicle?
Which types of lights must be checked during a pre-trip inspection?
30-Minute Rest Break Requirement
Clearance lights on a commercial motor vehicle serve what primary purpose?
1.3 Commercial Learner's Permit (CLP) Rules and Driver Disqualifications
How often should a driver check their mirrors while driving a commercial motor vehicle?
60/70-Hour Limit
A vehicle with a high center of gravity is more likely to:
Vehicle Control
When should a driver downshift?
Entry-Level Driver Training (ELDT)
What is the most important safety rule when backing a commercial vehicle?
1.4 Medical Self-Certification Categories, Other CDL Rules, and the International Registration Plan
What does GOAL stand for when backing a commercial vehicle?
Commercial Learner's Permit (CLP)
A commercial vehicle is more difficult to maneuver when:
When driving on a curve, a commercial vehicle should:
Out-of-Service Violations
The three components of total stopping distance are:
Chapter 2: Vehicle Inspection and Maintenance
2.1 The Seven-Step Pre-Trip Inspection Method
How far ahead should you scan the road while driving a commercial vehicle at highway speeds?
Safe Driving
Driver Vehicle Inspection Report (DVIR)
How often should you check your mirrors while driving a commercial vehicle?
When approaching a railroad crossing without signals or gates in a commercial vehicle, where must you stop?
Air Brake System Components
Air Brakes
Which of the following is the BEST indicator of an aggressive driver near your commercial vehicle?
2.2 Critical Safety Components: Steering, Suspension, Brakes, and Tires
When driving a commercial vehicle below 40 mph, what is the recommended following distance rule?
Air Compressor and Governor
What is the standard overhead clearance that most commercial drivers should assume for bridges and overpasses unless otherwise posted?
A 50-foot commercial vehicle is traveling at 35 mph on a dry road. What is the minimum recommended following distance?
Loading more…