What is the primary purpose of the NSPS Certified Survey Technician program?
Survey Types History
Question · Easy
Which statement best describes a boundary survey?
Chapter 1: Survey Types & Historical Development
1.1 CST Certification & Survey Licensing Distinction
Study guide
A crew is asked to collect ground elevations, breaklines, drainage features, and visible improvements for design mapping. What type of survey is this most directly describing?
Engineering Exam Prep Podcast
Listen on Spotify
Podcast
Which surveying activity is most associated with construction staking?
Why is it important for a Level I technician to recognize different survey types before beginning field work?
Question · Medium
Which statement best distinguishes plane surveying from geodetic surveying for Level I purposes?
1.2 Boundary, Cadastral, and Land Surveys
A field book from an older survey references a chain as a measuring unit. What should a Level I technician know?
A proposed route survey must support centerline alignment, profiles, cross sections, and later construction staking. Which field-note habit best supports that work from the beginning?
Question · Hard
Before placing an instrument on a tripod, what is the best first step with the tripod?
Field Equipment Operations
What is the main purpose of a plumb bob, optical plummet, or laser plummet during instrument setup?
1.3 Topographic, Hydrographic, and Route Surveys
Which action best protects a total station when moving between nearby setups on a job site?
What does a level rod allow a crew to determine during differential leveling?
Why should a prism pole be checked with a pole bubble before taking a total station shot?
What is the main purpose of field notes?
1.4 Construction, As-Built, and Industrial Alignment Surveys
When using a steel tape, why should the tape be kept straight and under proper tension?
What is a benchmark used for in surveying?
Which item is commonly used to mark a temporary point in soil during field work?
What information should a rod person normally communicate before a shot is taken?
1.5 Historical Surveying Units, Instruments, and Practices
Why should instrument lenses be cleaned only with approved lens tissue or proper optical cleaning materials?
What is the purpose of a backsight in total station work?
A level is set up very close to the backsight and far from the foresight. Why can this be a problem?
When setting up a total station, which order is generally most efficient?
Chapter 2: Tripods, Instruments & Field Setup
2.1 Tripod Setup, Centering, Plumbing, and Optical Plummets
Which field-note entry is most useful for a point located at a curb inlet?
Why is a two-peg test performed on a leveling instrument?
A total station shot is taken with the wrong prism height entered in the data collector. What is the most direct effect?
Which practice best reduces the chance of losing electronic field data?
2.2 Instrument Leveling, Bubble Vials, and Electronic Tilt Sensors
What is the most likely result of sighting a level rod that is leaning away from the instrument?
What does it mean to turn an angle in direct and reverse, or face left and face right?
Which field condition is most likely to degrade an EDM distance measurement?
Why should a crew avoid setting tripod legs on loose fill, uncompacted gravel, or a vibrating bridge deck when possible?
2.3 Equipment Care, Cleaning, Storage, and Transport Safety
A crew is chaining a distance on sloping ground but needs horizontal distance. What should they do?
What is a common reason to use offset stakes instead of placing a stake directly on the design line?
Which statement about field radios is most appropriate for a survey crew?
What is the best response if a data collector displays residuals or check shots that are larger than expected?
Chapter 3: Taping, Leveling & Distance Measurement
3.1 Steel Taping, Tension, Temperature, and Slope Corrections
Why is it important to record weather or unusual site conditions in field notes when they affect work?
A prism constant is set incorrectly in the total station or data collector. What type of error can result?
What is the practical purpose of line clearing in a survey crew's work?
Which setup practice helps reduce parallax when reading an optical instrument?
Loading more…