FREE NCCER Pipefitter Exam Guide 2026: Levels 1-4, Module Tests, Pipefitting Math (Practice Questions)
Video
What is the standard wall thickness designation for Schedule 40 carbon steel pipe?
Piping Systems
Question · Easy
Your heart has these. So do pipes.
Short
Free 2026 NCCER Pipefitter exam guide: Contren Learning Series Levels 1-4, Core Curriculum prerequisite, module tests (70% pass, 10-40 MC), NCAP Industrial Pipefitter journeyman assessment (125 Q, 3-hr closed-book, 75% pass), pipe offset math (travel = set × 1.414), rolling offsets, ISO/P&ID blueprints, hydrostatic testing, and an 8-12 week study plan per level.
Blog
What is OSHA’s normal rail extension for a portable ladder used to reach an upper landing?
Safety
Flashcard
What type of fitting is used to connect two pipes of different diameters in a straight run?
Valves And Fittings
Narrow excavation, deeper than it is wide, whose bottom width is not greater than 15 feet.
Guess the Term
Introduction & Exam Overview
About the NCCER Pipefitter Path
Study guide
Cheat sheet
What is the standard thread angle for American National Pipe Thread (NPT)?
Pipe Fabrication
Question · Medium
Read the clue and guess the term in 6 tries.
Game
When must a competent person inspect a construction scaffold for visible defects?
When threading pipe, what is the purpose of applying cutting oil?
Access device whose rungs, cleats and steps must be parallel, level and uniformly spaced when set for use.
What is the purpose of a gate valve?
How far may a worker travel laterally to reach an exit in a trench at least 4 ft deep?
What type of valve is best suited for throttling (regulating) flow?
Comparison of two numbers expressed as the quotient of one divided by the other.
Math
Exam Logistics & Credentials
What is the function of a check valve?
Swap tiles to line up three of the same term.
Term Match
What protection does a trench shield provide during a cave-in?
What is the takeout (makeup) measurement of a fitting?
Union of two nonparallel rays starting from a common point called the vertex.
To calculate the cut length of a pipe between two fittings, what formula is used?
Why can a pneumatic pressure test release more energy than a hydrostatic test?
What is the constant multiplier used to calculate the travel of a 45-degree offset?
Fabricated conduit run with flanges and fittings attached, used to carry vapors, gases or liquids.
Pipefitting fundamentals
How to Use This Guide
What type of pipe joint uses heat to fuse metal filler material between two pieces?
Welding Processes
Flip two cards at a time to find matching terms.
Term Pairs
Why identify the limits of a piping test section before applying pressure?
What welding process uses a continuously fed wire electrode and shielding gas?
Written document, backed by a PQR, that sets the process, base material, and consumables to use for a given joint.
What is the purpose of a gasket in a flanged pipe connection?
A layout dimension of 7⅝ in. grows by 2¾ in. What is the new dimension?
What is the bolt tightening pattern for flanged connections?
Professional organization that writes and publishes the B31 Code for Pressure Piping, including B31.3 Process Piping.
Chapter 1: Safety
1.1 Ladders, Scaffolds & Fall Protection
What is the primary hazard when cutting or welding on a pipe that previously contained flammable materials?
Find five hidden terms in a grid of letters.
Term Search
How much distance around a 10-in. actual outside diameter pipe is one full turn?
What does the term 'NPS' stand for in pipe specifications?
Sloped cut made on a pipe end to prepare it for a weld.
Cutting
What is the purpose of an expansion loop or expansion joint in a piping system?
Loading more…