Which OSI layer is responsible for end-to-end logical addressing and path determination between hosts on different networks?
Networking Fundamentals
Question · Easy
Longest prefix: roots reggae from a postman
Short
How does encapsulation change application data as it crosses a TCP/IP network?
Data Communication and Network Basics
Flashcard
In the TCP/IP reference model, which layer aligns with the OSI Network layer?
Huawei device software that, on AR devices, takes over user management, remote access control and the TCP/IP stack while Linux handles basic task scheduling.
Data communication basics
Guess the Term
Introduction
About HCIA-Datacom H12-811 V1.0
Study guide
Cheat sheet
How many bits long is a standard Ethernet MAC address?
Read the clue and guess the term in 6 tries.
Game
What MAC address does an IPv4 host resolve when the destination is on another subnet?
A host needs to send a packet to a destination on the same subnet but does not yet know the destination MAC address. Which protocol does it use?
Mechanism a station uses to learn another node's physical hardware identifier from its known IP identifier.
Which ICMP message type does the ping utility use as its echo request?
Question · Medium
Switches with no Spanning Tree
When should a network application favor TCP over UDP?
Which transport-layer protocol provides reliable, connection-oriented delivery using a three-way handshake?
Technology that divides one physical segment into several separate broadcast domains so broadcasts stay within each.
Ethernet switching
Study Strategies and Exam Logistics
Which Huawei VRP command mode allows you to enter global configuration commands such as creating a VLAN?
Vrp Basics
Swap tiles to line up three of the same term.
Term Match
What is the practical difference between the VRP user view and system view?
Which VRP command saves the current running configuration to the startup configuration file?
IEEE 802.1D mechanism that blocks redundant paths so a bridged network forms a loop-free logical topology.
On Huawei VRP, which keyword negates or removes a previously configured command?
How many usable host addresses does an IPv4 /27 subnet provide?
IP Network Interconnection
Which command displays the current running configuration on a Huawei VRP device?
IEEE 802.1w loop-prevention mechanism that uses one common topology for all VLANs and converges faster than the 802.1D original.
Chapter 1: Network Models and Ethernet Fundamentals
OSI and TCP/IP Models
On a Huawei switch, what is the default VLAN ID assigned to all access ports out of the box?
Vlans
Flip two cards at a time to find matching terms.
Term Pairs
For 192.168.10.77/27, what are the network, broadcast, and usable-host range?
An access link on a Huawei switch carries traffic for which VLANs?
IEEE 802.3ad mechanism that negotiates which physical ports in a group are active and which carry service traffic.
On a Huawei trunk link, which type of frame is sent untagged by default?
How does a host decide whether to send directly to a peer or to its default gateway?
Which Huawei VRP port type can send some allowed VLANs tagged and others untagged on the same link?
Link-state interior gateway protocol, IP protocol number 89, that builds a shared topology database and computes least-cost routes with Dijkstra's algorithm.
IP technology
Ethernet Technology and MAC Addressing
Which interface type on a Huawei Layer 3 switch is most commonly used to provide inter-VLAN routing for many VLANs?
Find five hidden terms in a grid of letters.
Term Search
Which route wins when several routing-table entries match a destination?
When a Huawei router is used in router-on-a-stick mode, what must be configured on each sub-interface for the corresponding VLAN?
Service that leases an IP address and other connection details to a device that joins a network.
Which Huawei VRP command sets a Layer 2 interface to operate as a trunk port?
How do route preference and metric differ on Huawei VRP?
Loading more…