FREE CDL Study Guide 2026: Pass the General Knowledge Test on Your First Try
Video
When performing a pre-trip inspection, the driver should ensure that the steering wheel free play (lash) does not exceed what limit?
Cdl Vehicle Inspection
Question · Medium
POV: the turn is tighter than it looks
Short
Best High-Visibility Safety Vests for Construction, CDL & OSHA 30 in 2026
Complete guide to ANSI Class 2 high-visibility safety vests for OSHA 30, CDL skills test, and construction certification candidates. Covers ANSI/ISEA 107 visibility classes, OSHA 29 CFR 1926.201 requirements, FHWA MUTCD flagger standards, breakaway vs zipper-front designs, and reflective strip specifications in 2026.
Blog
CDL Classes (A, B, C)
General Knowledge
Flashcard
During the cab check portion of a pre-trip inspection, you should test the parking brake by:
Chapter 1: CDL Overview, CLP, and Federal Licensing Regulations
1.1 CDL Classes, Endorsements, Restrictions, and Testing Architecture (49 CFR Part 383)
Study guide
Which emergency equipment is required to be on a commercial motor vehicle?
Question · Easy
GVWR vs GCWR
A post-trip inspection report is important because:
Best Reflective Warning Triangles for CDL Pre-Trip Inspection Test 2026
Complete guide to DOT-approved reflective warning triangles for the CDL pre-trip inspection skills test in 2026. FMCSA 49 CFR 392.22 placement rules, 5 top-rated 3-packs compared, and why you must carry them after getting your CDL.
During a pre-trip inspection, the driver notices a coolant leak near the water pump. What should the driver do?
Free CDL study guide for 2026 covering General Knowledge format, ELDT rules, high-yield topics, and a practical plan to pass and launch a driving career.
Hours of Service (HOS) - 11-Hour Rule
Which of the following is an out-of-service condition that would prevent a vehicle from being driven?
Question · Hard
1.2 Entry-Level Driver Training (ELDT) and the Training Provider Registry (49 CFR Part 380)
During the pre-trip inspection, which of the following should a driver check regarding the exhaust system?
Hours of Service - 14-Hour Rule
What is the minimum tread depth required for steer axle tires on a commercial motor vehicle?
What is the minimum tread depth required for tires on drive and trailer axle positions?
30-Minute Rest Break Requirement
When inspecting slack adjusters on an S-cam brake system, the pushrod stroke at the brake chamber should not exceed what general limit?
1.3 Commercial Learner's Permit (CLP) Rules and Driver Disqualifications
During a tire inspection, you notice a bulge on the sidewall of one of the steer tires. What should you do?
60/70-Hour Limit
What is the purpose of the brake drum inspection during a pre-trip?
When should you place your reflective triangles after stopping on the road due to a breakdown?
Entry-Level Driver Training (ELDT)
What is the proper technique for shifting gears in a commercial motor vehicle with a manual transmission (double clutching)?
Cdl Vehicle Control
1.4 Medical Self-Certification Categories, Other CDL Rules, and the International Registration Plan
What is "off-tracking" when driving a commercial vehicle through a turn?
Commercial Learner's Permit (CLP)
When turning right with a large commercial vehicle, the correct technique is to:
What does countersteering mean?
Out-of-Service Violations
When driving a commercial vehicle, the driver should be aware that the vehicle's total stopping distance at highway speed is significantly greater than a passenger car. At 55 mph, the total stopping distance for a fully loaded tractor-trailer on dry pavement is approximately:
Chapter 2: Vehicle Inspection and Maintenance
2.1 The Seven-Step Pre-Trip Inspection Method
What is the proper RPM range for shifting gears in most commercial diesel engines?
Driver Vehicle Inspection Report (DVIR)
During an alley dock backing maneuver, the driver should:
When performing a parallel parking maneuver with a commercial vehicle, what is the key challenge?
Air Brake System Components
Air Brakes
If a trailer begins to drift off course while backing in a straight line, the driver should:
2.2 Critical Safety Components: Steering, Suspension, Brakes, and Tires
When backing a trailer around a corner (offset backing), the driver should:
Air Compressor and Governor
On a long downgrade, the proper technique for controlling speed is:
What is the difference between controlled braking and stab braking?
Loading more…