In the California CDL Air Brakes test, what component compresses air for the air brake system?
Air Tanks Draining
Question · Easy
What is the typical air compressor governor cut-out pressure range?
Low Air Warning Gauges
Chapter 1: Air Brake System Components & Foundation Brakes
1.1 Air Brake Fundamentals: The Three Braking Systems
Study guide
At what pressure does the air compressor governor typically cut IN to resume pumping?
What is the purpose of the air dryer in the brake system?
What is the function of the wet tank (supply or service reservoir)?
At what pressure does the safety valve in the supply tank typically open to release excess air?
1.2 Air Supply Subsystem: Compressor, Governor & Drive Mechanisms
What is the role of the foot valve (also called the treadle or service brake valve)?
What does the brake chamber do?
Spring Parking Brakes
What is the role of the slack adjuster on an S-cam brake?
Foundation Brakes Slack Adjusters
What does the S-cam do in an S-cam drum brake?
1.3 Air Storage Reservoirs, Filtration & Moisture Management
How are spring (parking) brakes held in the released position?
What is the shape and color of the parking brake control knob in most modern CMVs?
What is the shape and color of the trailer air supply control on a tractor?
What is a dual air brake system?
1.4 Foundation Brake Mechanics: S-Cam, Wedge & Disc Systems
At what pressure must the low air pressure warning device activate at the latest?
While driving, the low air pressure warning light comes on. What should you do?
How often should air tank drain valves be operated to remove water and oil?
What is the maximum allowable air loss rate for a single vehicle with the brakes released (static leak rate)?
Air Pressure Tests
1.5 Safety Valves, Operational Gauges & Monitoring Switches
What is the maximum allowable air loss rate for a combination vehicle with the brakes released?
What is the maximum allowable air loss rate for a single vehicle with the brakes APPLIED (applied leak rate)?
In the California CDL Air Brakes test, what is the maximum allowable air loss rate for a combination vehicle with the brakes APPLIED?
During the air brake pre-trip inspection, how do you test the low air pressure warning device?
Chapter 2: Dual Air Systems, Parking Brakes & In-Cab Controls
2.1 Dual Air Brake System Architecture & Safety Isolation
During the air brake pre-trip, how do you test that the spring brakes apply automatically?
In normal stops with air brakes, you should:
What is controlled braking in an emergency stop with air brakes?
In the California CDL Air Brakes test, what is stab braking in an emergency stop?
2.2 Spring Parking & Emergency Brake Mechanics
What is brake fade?
What is the proper way to prevent brake fade on a long downgrade?
Is it correct to use the parking brake to slow or stop the vehicle while driving?
Does ABS (Anti-lock Braking System) reduce the stopping distance of a CMV?
2.3 In-Cab Valves, Tractor Protection & Trailer Controls
If the ABS warning lamp comes on while driving, what should you do?
Question · Medium
On which CMVs is ABS required by federal rule?
What is the purpose of the anti-compounding (modulator) valve in a dual air brake system?
How do you test the service brakes during a pre-trip inspection (the static service brake test)?
2.4 Modulating Control Valves & Dual Parking Control Valves
How do you test the parking brake in a pre-trip inspection (the tug test)?
In the California CDL Air Brakes test, what is the purpose of the alcohol evaporator in some air brake systems?
In which order should you typically drain the air storage tanks?
What might cause the air compressor governor to NOT cut out at its high pressure setting?
Chapter 3: Pre-Trip Inspection Protocols & Out-of-Service Criteria
3.1 The Seven-Step Inspection Method & Where Air Brake Checks Fit
Loading more…