Which AWS structural welding code edition is the reference document for the current D1.1 Endorsement exam?
D1 1 Endorsement General
Question · Easy
Who is eligible to take the AWS D1.1 Endorsement examination?
Document that Clause 5 can exempt from the code's qualification testing requirements.
Qualification
Guess the Term
Chapter 1: Exam Structure, Code Scope & General Requirements
1.1 AWS D1.1 Endorsement Exam Format & Open-Book Navigation
Study guide
The AWS D1.1 Endorsement is administered at which testing partner?
Read the clue and guess the term in 6 tries.
Game
What is the minimum passing score on the AWS D1.1 Endorsement?
Face, root, or side version of a destructive test in which a coupon is folded to reveal incomplete fusion.
How many multiple-choice questions appear on the D1.1 Endorsement, and what is the time allowance?
Which statement best describes the open-book format of the D1.1 Endorsement?
Question · Medium
Piece of test metal welded and then subjected to bends or radiography during qualification.
1.2 Clause 1 Scope, Responsibilities & Structural Classifications
Per D1.1, which clause governs the design of welded connections?
D1 1 Clause Structure
Swap tiles to line up three of the same term.
Term Match
Which D1.1 clause contains the rules for prequalified WPSs (Welding Procedure Specifications)?
Small weld placed at even intervals to keep a joint's fitup stable before the root pass is run.
Procedure and performance qualification testing requirements are found primarily in which D1.1 clause?
Which D1.1 clause provides the visual acceptance criteria found in Table 8.1?
Person who, with operators and tackers, must pass a performance qualification test under Clause 6.
1.3 Normative References, Terminology & Base Metal Scope
Stud welding requirements in D1.1 are located in which clause?
Flip two cards at a time to find matching terms.
Term Pairs
Tubular structure requirements are addressed in which D1.1 clause?
Current path between electrode and work whose stray marks can be rejectable by code.
Fabrication
Strengthening and repair of existing structures is covered in which part of D1.1?
Which D1.1 clause contains General Requirements that define the scope and key terms?
Short metal fastener that Clause 9 covers welding to structural steel.
Chapter 2: Design of Welded Connections (Clause 4)
2.1 Groove and Fillet Weld Design & Effective Throat Calculations
D1.1 applies to welding of carbon and low-alloy structural steels with a minimum base-metal thickness of how much?
D1 1 Scope
Find five hidden terms in a grid of letters.
Term Search
A connection subjected to repeated load cycles that can cause fatigue is classified by D1.1 as:
D1 1 Design
Corrective welding of a defect or failure in an existing component to restore structural integrity.
Which group of base metals is listed in Table 5.3 as prequalified for use under D1.1?
D1 1 Prequalification
For a SMAW prequalified WPS, which electrode classification matches a low-hydrogen 70 ksi electrode used for ASTM A572 Gr. 50?
To cut metal away on the back side of a joint until sound weld metal from the front side is reached, before the back-side passes.
2.2 Statically Loaded Connection Details, Geometry Limits & Transitions
Which is NOT one of the four prequalified welding processes recognized for prequalified WPSs in D1.1 Clause 5?
Trades Exam Prep Podcast
Listen on Spotify
Podcast
In D1.1, the abbreviation 'CJP' stands for what type of groove weld?
D1 1 Definitions
Material trapped between passes that thorough interpass cleaning helps prevent.
For a prequalified CJP groove weld, the effective throat is generally equal to:
For a 90-degree fillet weld with equal legs, the theoretical throat is approximately:
Internal force left in a weldment that postweld heat treatment is used to relieve.
2.3 Cyclically Loaded Structures, Stress Categories & Fatigue Life Design
Per Table 5.7, the minimum prequalified fillet weld size for a base metal thickness over 3/4 in. up to 1-1/2 in. is:
The maximum prequalified fillet weld size along the edge of material 1/4 in. thick or greater is:
Abbreviation D1.1 uses for ultrasonic, radiographic, magnetic particle and similar methods that check welds without damaging them.
Inspection
D1.1 Table 5.8 prescribes minimum preheat and interpass temperatures based on which factors?
Loading more…