For Alabama CDL air-brake testing, what component compresses air for the air brake system?
Air Brake Components
Question · Easy
Under ALEA CDL Manual Section 5, what is the typical air compressor governor cut-out pressure range?
Question · Hard
Chapter 1: Air Brake System Components & Foundation Brakes
1.1 Air Brake Fundamentals: The Three Braking Systems
Study guide
On the Alabama CDL Air Brakes test, at what pressure does the air compressor governor typically cut IN to resume pumping?
For an Alabama CDL air-brake vehicle, what is the purpose of the air dryer in the brake system?
Question · Medium
For Alabama CDL air-brake testing, what is the function of the wet tank (supply or service reservoir)?
Under ALEA CDL Manual Section 5, at what pressure does the safety valve in the supply tank typically open to release excess air?
1.2 Air Supply Subsystem: Compressor, Governor & Drive Mechanisms
On the Alabama CDL Air Brakes test, what is the role of the foot valve (also called the treadle or service brake valve)?
For an Alabama CDL air-brake vehicle, what does the brake chamber do?
For Alabama CDL air-brake testing, what is the role of the slack adjuster on an S-cam brake?
Under ALEA CDL Manual Section 5, what does the S-cam do in an S-cam drum brake?
1.3 Air Storage Reservoirs, Filtration & Moisture Management
On the Alabama CDL Air Brakes test, how are spring (parking) brakes held in the released position?
Air Brake Parking Dual
For an Alabama CDL air-brake vehicle, what is the shape and color of the parking brake control knob in most modern CMVs?
For Alabama CDL air-brake testing, what is the shape and color of the trailer air supply control on a tractor?
Under ALEA CDL Manual Section 5, what is a dual air brake system?
1.4 Foundation Brake Mechanics: S-Cam, Wedge & Disc Systems
On the Alabama CDL Air Brakes test, at what pressure must the low air pressure warning device activate at the latest?
Air Brake Pre Trip
For an Alabama CDL air-brake vehicle, while driving, the low air pressure warning light comes on. What should you do?
For Alabama CDL air-brake testing, how often should air tank drain valves be operated to remove water and oil?
Under ALEA CDL Manual Section 5, what is the maximum allowable air loss rate for a single vehicle with the brakes released (static leak rate)?
1.5 Safety Valves, Operational Gauges & Monitoring Switches
On the Alabama CDL Air Brakes test, what is the maximum allowable air loss rate for a combination vehicle with the brakes released?
For an Alabama CDL air-brake vehicle, what is the maximum allowable air loss rate for a single vehicle with the brakes APPLIED (applied leak rate)?
For Alabama CDL air-brake testing, what is the maximum allowable air loss rate for a combination vehicle with the brakes APPLIED?
Under ALEA CDL Manual Section 5, during the air brake pre-trip inspection, how do you test the low air pressure warning device?
Chapter 2: Dual Air Systems, Parking Brakes & In-Cab Controls
2.1 Dual Air Brake System Architecture & Safety Isolation
On the Alabama CDL Air Brakes test, during the air brake pre-trip, how do you test that the spring brakes apply automatically?
For an Alabama CDL air-brake vehicle, in normal stops with air brakes, you should:
Air Brake Driving
For Alabama CDL air-brake testing, what is controlled braking in an emergency stop with air brakes?
Under ALEA CDL Manual Section 5, what is stab braking in an emergency stop?
2.2 Spring Parking & Emergency Brake Mechanics
On the Alabama CDL Air Brakes test, what is brake fade?
For an Alabama CDL air-brake vehicle, what is the proper way to prevent brake fade on a long downgrade?
For Alabama CDL air-brake testing, is it correct to use the parking brake to slow or stop the vehicle while driving?
Under ALEA CDL Manual Section 5, does ABS (Anti-lock Braking System) reduce the stopping distance of a CMV?
2.3 In-Cab Valves, Tractor Protection & Trailer Controls
On the Alabama CDL Air Brakes test, if the ABS warning lamp comes on while driving, what should you do?
For an Alabama CDL air-brake vehicle, on which CMVs is ABS required by federal rule?
For Alabama CDL air-brake testing, what is the purpose of the anti-compounding (modulator) valve in a dual air brake system?
Under ALEA CDL Manual Section 5, how do you test the service brakes during a pre-trip inspection (the static service brake test)?
2.4 Modulating Control Valves & Dual Parking Control Valves
On the Alabama CDL Air Brakes test, how do you test the parking brake in a pre-trip inspection (the tug test)?
For an Alabama CDL air-brake vehicle, what is the purpose of the alcohol evaporator in some air brake systems?
For Alabama CDL air-brake testing, in which order should you typically drain the air storage tanks?
Under ALEA CDL Manual Section 5, what might cause the air compressor governor to NOT cut out at its high pressure setting?
Chapter 3: Pre-Trip Inspection Protocols & Out-of-Service Criteria
3.1 The Seven-Step Inspection Method & Where Air Brake Checks Fit
Loading more…