Government & Public Safety10 min read

NTN FireTEAM Practice Test: Eight Questions with Answers

Try eight free NTN FireTEAM questions covering crew judgment and observation, mechanical reasoning, mental math and reading. Find the skill to work on next.

OpenExamPrep Editorial TeamNovember 17, 2026

✓Key Facts

  • •National Testing Network describes four FireTEAM sections for firefighter applicants: Human Relations, Mechanical, Reading, and Math.
  • •National Testing Network lists a total FireTEAM testing time of approximately two hours in its published firefighter test overview.
  • •FireTEAM Human Relations Part I shows video scenarios continuously and asks candidates to choose the best response (National Testing Network).
  • •FireTEAM Human Relations Part II follows Part I immediately and asks about the firefighters and supervisors shown (National Testing Network).
  • •FireTEAM Mechanical uses an animated brick factory to present basic mechanical principles, observation and troubleshooting questions (National Testing Network).
  • •FireTEAM Math presents questions on video and requires candidates to calculate mentally without writing out their work (National Testing Network).
  • •FireTEAM Reading asks candidates to choose the words that best fit blanks in written material (National Testing Network).
  • •Each hiring department sets the scoring standards it applies to the FireTEAM results supplied by National Testing Network.
  • •National Testing Network lists the Role Fitness Questionnaire under its separate Firefighter (Express) exam description on the firefighter testing page.

Try these eight free NTN FireTEAM practice questions to find what to work on before your firefighter entrance exam. You’ll make a crew decision, recall what two people did across scenes, trace a mechanical fault, calculate in your head, and fill in two blanks from a short procedure. Finish the questions before opening the answer key, then use your first uncertain answer to choose a drill.

Check that your booking says FireTEAM. National Testing Network (NTN) describes an approximately two-hour exam with Human Relations, Mechanical, Reading, and Math sections. NTN lists Firefighter (Express) separately, with written judgment scenarios, illustrated mechanical items, and a Role Fitness Questionnaire. The exercises below are original written practice for the four-section FireTEAM. NTN firefighter test descriptions

Eight FireTEAM practice questions

Read each Human Relations scene once and move on. Answer question 2 without returning to the scenes. Read the mechanical setup once before tackling both questions. For math, ask someone to read only the two prompts aloud once, or use text-to-speech with the screen out of view. Do the calculations in your head and record only the final answers. Read the passage onscreen for questions 7 and 8. Mark each response you guessed or had trouble explaining, even if you think you chose correctly.

Human Relations — make a decision, then remember who did what

Scene 1. During a station open house, Captain Bell tells Lee and Ortiz to keep visitors at the welcome table until the demonstration area has been checked and cleared. Ortiz offers to check the area. Lee shows the arriving families where to wait. A few minutes later, a visiting parent asks Lee to let the family through for a quick photo. Lee can see Ortiz in the area checking the setup. Lee has yet to hear a clearance.

1. What is Lee’s best first response?

  • A. Let the family take the photo while Ortiz is there to watch.
  • B. Ask the family to wait, explain that the area is being checked, and offer to let them know when it opens.
  • C. Ask the family to check with Ortiz directly and let them walk over to find out.
  • D. Tell the family the demonstration has been cancelled and send them to another activity.

Scene 2. Later, Captain Bell asks the crew to move the welcome table. Before stepping away, Lee tells the next volunteer where the waiting families should line up. Ortiz updates the sign at the old entrance. When another family arrives, Bell asks Lee to check whether they found the new line, and Lee goes to check.

2. Which description of Lee is best supported by the actions in both scenes? Answer after moving the two scenes out of view.

  • A. Lee took responsibility for clearing the demonstration area.
  • B. Lee handled the sign at the old entrance and moved the table without being asked.
  • C. Lee resolved the setup delay by changing the order of activities.
  • D. Lee showed visitors where to wait and made sure the change in the queue reached the next volunteer.

Mechanical — trace the common supply

Setup. In a tabletop demonstration, a pressurized supply feeds two outlets. Water first passes a pressure gauge, then a shared shutoff valve, then reaches a junction that splits the pipe into left and right branches. Each branch has its own valve, followed by an outlet that drains into a tray. In normal operation the three valves are open and both outlets run. Assume an open valve lets water through, a closed valve blocks it, and the two branches have no other connections.

3. What happens when only the left branch valve is closed?

  • A. The left outlet stops and the right outlet keeps running.
  • B. The right outlet stops and the left outlet keeps running.
  • C. Both outlets stop because the two branches share a supply.
  • D. Both outlets keep running because the shared valve is open.

4. Both outlets are dry, but the gauge reads its usual supply pressure. Which single change would explain both observations?

  • A. Closing the right branch valve alone.
  • B. Closing the left branch valve alone.
  • C. Closing the shared shutoff valve.
  • D. Opening the right branch valve fully while the other valves remain open.

Math — listen once and work mentally

5. Each display crate holds 18 packets. Four full crates arrive. The crew sets aside 27 packets for the afternoon. How many packets are available for the morning?

6. Two rolls of tape mark off six equally sized demonstration spaces. At the same rate, how many rolls are needed for 21 spaces?

Reading — let the procedure settle each blank

Passage. At the end of a training session, the equipment coordinator inspects every returned unit. A unit with visible damage goes into the holding area for a second inspection. The unit must stay there [7] the coordinator approves its return to use. Once approved, the unit goes back into service. The weekly inventory still counts all units on site, [8] those in the holding area. The form has a separate line for held units so the coordinator can account for them in the site total.

7. Which word best completes the first blank?

  • A. although
  • B. because
  • C. while
  • D. unless

8. Which word best completes the second blank?

  • A. excluding
  • B. including
  • C. replacing
  • D. following

Answer key and what to do with a miss

1. B — Keep the family at the table and give them an update

Bell set a clear condition for entry. Ortiz’s presence in the area shows the check is underway, so Lee can explain the wait and remain useful to the family. A and C both let the visitors proceed before clearance. D preserves the boundary but gives the visitors inaccurate information. If you chose A, practise stating the exact condition before judging which response feels most helpful.

2. D — Match each person to an observed action

Lee showed the visitors where to wait in the first scene and briefed the replacement volunteer in the second. Ortiz checked the area and updated the sign. Bell gave the instructions. If you remembered a detail but assigned it to the wrong person, rehearse with two short scenes and mentally pair each person with one verb, such as “Lee checks in” or “Ortiz updates.” For a fresh check, use a new pair of scenes where the same people change assignments. Name who actually completed each task immediately afterward.

3. A — A valve after the split affects its own branch

Water still has an open path from the source through the shared valve to the right outlet. B swaps the branches, C treats a branch valve as a common valve, and D ignores the obstruction on the left. If the shared supply distracted you, follow the entire path to one outlet at a time. For a fresh check, mentally swap which branch valve is closed and predict each outlet separately.

4. C — A shutoff before the split can stop both outlets

The gauge is before the shared valve, so the supply can still register pressure at the gauge while the closed shared valve blocks water from reaching either branch. A or B would leave one path available. D leaves both paths open. When a gauge reading seems to contradict an observation, picture its location in the path. As a fresh check, sketch a common shutoff and two branches after the drill. Put a gauge just after the shared valve and explain why it would no longer be measuring pressure on the supply side.

5. 45 packets — Multiply, then subtract the reserve

Four groups of 18 make 72. Take away 30 to get 42, then add back 3 because the reserve was 27. If you lost track of the quantities, repeat them to yourself as “18 per crate, four crates, 27 held.” If you remembered the numbers but stalled on the arithmetic, practise subtracting nearby round numbers and correcting the difference. For a fresh prompt, try five crates of 16 with 38 held back. The morning gets 42 packets.

6. Seven rolls — Find what one roll covers

Two rolls cover six spaces, so one roll covers three spaces. Seven groups of three make 21. If you got 3, you found the rate and stopped before applying it. If you got 63, you multiplied the spaces by the rate in spaces per roll. Divide by the rate to get rolls. For a new version, ask how many rolls mark 32 spaces when three rolls mark 12. One roll marks four spaces, so you need eight rolls.

7. D — “Unless” introduces the exception

The unit stays in the holding area by default. The next sentence confirms that approval ends the hold. “Because” would make approval the reason for holding it, and “while” would make the hold apply during the approval. “Although” would make the hold apply despite approval. If two choices seem possible, say the rule out loud in plain language. For a fresh check, change approval to a signed release and explain when the default changes.

8. B — “Including” keeps held units in the total

“All units on site” sets the scope. The separate line records those units within the total. “Excluding” would remove them, and “replacing” or “following” would describe a different relationship. A common miss is reading a separate line as a separate inventory. For a fresh check, explain what would change if the form directed readers to report an available-for-use subtotal. A held unit would count in the site total and stay out of the available-for-use subtotal while it waits for approval.

Match your next drill to what went wrong

Use a confident answer you can explain as one piece of evidence. Treat a correct guess like a miss when you choose what to practise. Start with a short untimed session, then try fresh examples without replaying or rereading the prompts that were meant to be one-pass. On a fresh attempt, wait until you answer to revisit the prompt. If you can solve it as soon as you see it again, practise holding the details. If a second look makes no difference, review the rule you used. A timed repeat on familiar items can hide either problem.

What happenedWhat to practise next
Picked a friendly response that skipped an instructionIn five new judgment scenarios, say the instruction that governs the decision, then choose an action that follows it and helps the person.
Remembered the scene but mixed up the peopleAsk a partner to read two short scenes about the same people. After each, recall each person’s action aloud. For the final pair, delay that recall until both scenes are finished.
Lost the mechanical layoutDescribe a two-branch system aloud from source to outlet before answering. Then change the location of one valve and predict exactly which outlet is affected.
Got the math right only after seeing it writtenStart with five spoken prompts. Repeat the quantities and units in your head before doing the arithmetic. Try a new five after reviewing the calculations that slowed you down.
Filled a reading blank by sound aloneFind the phrase that sets the condition or scope. Insert each plausible choice and check whether the full sentence still follows the passage’s rule.

Use the free OpenExamPrep FireTEAM practice questions for more independent skill drills. If you lost track of the units in question 6, review ratios and proportions on the FireTEAM cheat sheet, then ask a partner to read you a fresh prompt. Keep the score from these eight questions as a study note. Each hiring department chooses its own scoring standards. NTN candidate FAQ

Get familiar with the actual presentation

On FireTEAM, Human Relations Part I video items play continuously. Part II follows immediately and asks about the people you saw. Mechanical questions use an animated brick factory to test observation and troubleshooting. Math prompts are on video, with calculations done mentally and without written working. In Reading, you choose words that fit blanks. NTN’s current overview gives an overall estimate of about two hours. Use the instructions for your sitting for question counts, section clocks, and navigation. NTN FireTEAM overview

If the video presentation is what you need to see next, Ergometrics offers paid Basic and Extended FireTEAM practice. Its listing shows five Human Relations items in Basic and 20 in Extended. Both list 12 Mechanical items. The two allowed runs repeat the same material, and you can stop and read explanations in the practice version. Use your first run to notice where information goes by too fast and your second to review what you missed. Ergometrics practice options · Ergometrics practice FAQ

Before booking, check the department announcement for the exam name, score requirements, and closing date. Look for a separate CPAT requirement and any other hiring steps. NTN shows the exam total during checkout for the chosen test, location, and department job. NTN testing process · NTN test pricing

NTN FireTEAMFirefighter ExamPractice TestHuman RelationsMechanical Aptitude

Related Articles

Stay Updated

Get free exam tips and study guides delivered to your inbox.

Free exam tips & study guides. Unsubscribe anytime.