Free Practice Questions for TX Fire Sprinkler
Exam-style questions and explanations by OpenExamPrep.
Loading practice questions...
Explore More Fire Sprinkler Contractor
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.
Key Facts: TX Fire Sprinkler Exam
70%
Passing Score
State Fire Marshal
100 Q
Practice Questions
OpenExamPrep
NICET
Certification Required
NFSA
NFPA 13
Primary Standard
NFPA
Annual
License Renewal
State
Texas requires fire sprinkler contractors to obtain state licensing. The exam covers NFPA sprinkler standards, system design, hydraulic calculations, and state-specific fire protection regulations.
Sample TX Fire Sprinkler Practice Questions
Try these sample questions to review concepts for the TX Fire Sprinkler exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1Which Texas state agency regulates fire sprinkler contractors?
2What Texas law governs fire protection sprinkler system service and installation?
3What is a Sprinkler Certificate of Registration (SCR) in Texas?
4What is a Responsible Managing Employee (RME) license in Texas fire sprinkler regulation?
5What tests are required for an RME-General license in Texas?
6What is the TFM08 exam?
7How often may a Texas fire sprinkler license applicant schedule each type of test?
8What NICET certification level is required for a Texas fire sprinkler ITM (inspection, testing, maintenance) license?
9Under Texas Insurance Code § 6003.151, who is exempt from the sprinkler contractor registration requirement?
10What must be prominently displayed on every fire sprinkler bid, proposal, offer, and installation drawing in Texas?
About the TX Fire Sprinkler Exam
The Texas fire sprinkler contractor exam covers NFPA 13/13D/13R sprinkler system design and installation, NFPA 25 inspection and testing, state licensing requirements, NICET certification, hydraulic calculations, and state fire code compliance.
Exam sponsor: Texas State Fire Marshal. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.
Questions
100 questions
Time Limit
2 hours
Passing Score
70%
Reported exam pass rate: 70%. estimated first-time pass rate This describes exam candidates, not OpenExamPrep users or results from using our resources. Exam sponsor website
Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.
Official sources
Our practice resources: topics covered
We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.
System Design
NFPA 13/13D/13R, sprinkler types, spacing, coverage, pipe sizing
Installation
Pipe hanging, bracing, connections, testing, commissioning
Inspection & Testing
NFPA 25, ITM requirements, acceptance testing, impairments
Regulations
State licensing, NICET, fire code, permits, insurance
Hydraulics
Hydraulic calculations, water supply, backflow prevention, pressure
Preparing for the TX Fire Sprinkler Exam
What You Need to Know
- Passing score: 70%
- Exam length: 100 questions
- Time limit: 2 hours
- Exam / certification fees: Varies Official sources
Using Our Practice Resources
- Work through all 100 available questions
- Review every answer and explanation
- Track weak areas and revisit them
- Use our AI tutor for tough concepts
TX Fire Sprinkler: Suggested Study Strategy
Frequently Asked Questions
What does the fire sprinkler contractor exam cover?
The exam covers NFPA 13/13D/13R sprinkler design, NFPA 25 inspection, hydraulic calculations, state licensing requirements, and fire code compliance.
What NICET level is required?
Most states require NICET Level II or III certification in water-based systems layout for fire sprinkler contractor licensing.
What is the passing score?
A minimum score of 70% is typically required to pass the fire sprinkler contractor licensing exam.
What NFPA standards are tested?
The exam primarily covers NFPA 13 (sprinkler installation), NFPA 13D (one/two-family dwellings), NFPA 13R (residential), and NFPA 25 (inspection/testing/maintenance).