PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for SVP Welder

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Saudi Skill Verification Program (SVP) Construction Trades

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Saudi Skill Verification Program - Building Electrician

Practice Questions

Saudi Skill Verification Program - Carpenter (Saudi Arabia)

Practice Questions

Saudi Skill Verification Program - HVAC / AC Technician (Saudi Arabia)

Practice Questions

Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia)

Practice Questions

Saudi Skill Verification Program - Mason / Block Mason

Practice Questions

Saudi Skill Verification Program - Pipefitter

Practice Questions
Exam Review

Key Facts: SVP Welder Exam

100

Practice Questions

OpenExamPrep

50% (theory) + pass practical

Pass Score

Official Guidelines

2.0 hours

Time Limit

Exam Rules

Saudi Skill Verification Program - Welder prep course featuring 100 high-quality practice questions and detailed explanations.

Sample SVP Welder Practice Questions

Try these sample questions to review concepts for the SVP Welder exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What is the recommended filter lens shade number for Shielded Metal Arc Welding (SMAW) when using an arc current of 150 Amperes?
A.Shade 5 to 7
B.Shade 8 to 9
C.Shade 10 to 11
D.Shade 14 to 15
Explanation: For shielded metal arc welding (SMAW) with arc currents between 75 and 250 Amperes, ANSI Z87.1 and AWS safety standards recommend using a shade 10 or 11 filter lens. This level of shading blocks harmful ultraviolet (UV) and infrared (IR) radiation to prevent optical damage like welder's flash (photokeratitis). Shades lower than 10 do not provide sufficient protection, while shade 14 or 15 is generally reserved for very high current carbon arc cutting or heavy welding.
2Welding in the presence of chlorinated degreasing solvent vapors (such as trichloroethylene) presents a severe hazard due to the potential formation of which toxic gas?
A.Phosgene gas
B.Carbon monoxide
C.Ozone
D.Hydrogen sulfide
Explanation: Chlorinated hydrocarbon solvents decompose rapidly when exposed to ultraviolet radiation from the welding arc or high heat, generating phosgene gas (COCl2), which is highly toxic even in extremely low concentrations. Exposure to phosgene can cause severe pulmonary edema, eye irritation, and can be fatal. Welders must ensure all degreasing solvents are completely removed and vapors ventilated far away from any active arc area.
3Why must acetylene cylinders always be stored and operated in an upright (vertical) position?
A.To prevent liquid acetone from escaping with the gas and damaging equipment
B.To keep the cylinder safety cap from coming loose during pressure releases
C.To allow the cylinder porous filler material to settle evenly at the bottom
D.To maintain a higher gas pressure within the cylinder neck space
Explanation: Acetylene is unstable at pressures above 15 psi (1 bar) in gas form, so it is dissolved in liquid acetone within a porous filler inside the cylinder. If an acetylene cylinder is placed on its side, the liquid acetone can flow out with the gas, clogging regulators, damaging hoses, and creating an extreme fire and explosion hazard. Storing cylinders upright ensures that only gaseous acetylene is drawn from the valve.
4What is the only safe and approved method for testing oxy-fuel gas hoses and connections for leaks?
A.Holding a lit match or lighter near the joints to check for a flame
B.Applying a specialized oil-free soap and water solution and watching for bubbles
C.Listening closely for hissing sounds while spraying WD-40 onto the fittings
D.Submerging the entire hose assembly in a tank of mineral oil under pressure
Explanation: Testing for gas leaks must always be performed using a non-fatty, oil-free soapy water solution or a dedicated commercial leak-detection fluid. Fat or oil-based soaps can react violently with oxygen, which can cause spontaneous combustion or explosion. Hissing sounds are unreliable for small leaks, and using open flames is an extremely dangerous practice that can ignite escaping fuel gas instantly.
5According to standard hot work permit regulations, what is the minimum radius of the spark-containment zone that must be cleared of combustibles before welding?
A.10 feet (3 meters)
B.20 feet (6 meters)
C.35 feet (11 meters)
D.75 feet (23 meters)
Explanation: NFPA 51B and OSHA regulations require a minimum 35-foot (11-meter) radius clearance zone around any hot work activity. Any combustible materials within this zone must be removed, covered with fire-resistant blankets, or shielded to prevent sparks and slag from starting a fire. If combustibles cannot be protected, a dedicated fire watch must be stationed to monitor the area.
6Which of the following electrical terms refers to the voltage present between the electrode holder and the work lead when the welding machine is turned on but no arc is struck?
A.Arc voltage
B.Open circuit voltage (OCV)
C.Operating voltage
D.Secondary circuit drop
Explanation: Open circuit voltage (OCV) is the voltage at the output terminals of a welding power source when it is energized but the arc is not established. OCV is typically between 50 and 80 volts for manual welding machines to help initiate the arc easily. Because the welder is handling the electrode and holder, OCV represents the highest shock risk period during setup and electrode changes, especially in wet or humid conditions.
7Why is wearing synthetic clothing (such as polyester or nylon) strictly prohibited while performing welding operations?
A.Synthetics generate static electricity that can interfere with high-frequency arc starters
B.Synthetics melt when exposed to hot slag and sparks, causing severe skin burns
C.Synthetic fibers degrade rapidly when exposed to shielding gases like helium
D.Synthetic materials block heat release, leading to rapid heat exhaustion of the welder
Explanation: Synthetic fibers like polyester, nylon, and acrylic melt when hit by hot welding sparks or slag. The molten plastic adheres tightly to the skin, causing deep, painful third-degree burns. Welders must wear flame-resistant cotton, wool, or leather, which char instead of melting and provide a physical barrier to thermal energy.
8When performing welding operations inside a confined space, where should the gas cylinders and welding power sources be located?
A.Inside the confined space, close to the welder for quick emergency shutdown
B.Outside the confined space, with lines routed inside and monitored by an attendant
C.Suspended above the confined space entrance to prevent gas build-ups
D.In a separate ventilated storage room at least 50 meters away from the area
Explanation: To prevent gas accumulation (which can lead to asphyxiation or explosions) and to minimize electrical hazards, all gas cylinders and welding power machines must remain outside the confined space. Only the torch/electrode holder, gas hoses, and welding cables should enter the space. A safety standby person (attendant) must be stationed outside to monitor the welder and shut down equipment in an emergency.
9What is the primary objective of using local exhaust ventilation (LEV) systems at the source of a welding operation?
A.To cool down the weld metal rapidly to prevent thermal distortion
B.To pull welding fumes and gases away from the welder's breathing zone
C.To supply fresh oxygen to the welding arc to stabilize the plasma column
D.To dilute the concentration of shielding gas so it does not displace oxygen in the room
Explanation: Local exhaust ventilation (LEV) uses a moveable suction hood positioned close to the weld arc to capture fumes, metal dusts, and gases right at their point of generation. This prevents these contaminants from rising into the welder's breathing zone or spreading throughout the workspace. LEV is the most effective engineering control for minimizing long-term health risks like metal fume fever and lung damage.
10Which of the following practices is correct and safe when moving high-pressure gas cylinders in a workshop?
A.Rolling the cylinders horizontally along the floor using foot pressure
B.Lifting cylinders by their protective valve caps using a crane magnet
C.Securing the safety cap and moving the cylinders in an approved wheeled cart
D.Dragging the cylinders by their valves to avoid lifting hazards
Explanation: Before moving any compressed gas cylinder, the valve must be closed and the safety cap must be securely threaded on to protect the valve stem from breaking off if dropped. Cylinders must always be transported in an upright position secured in a wheeled hand truck or cylinder cart. Dropping or mismanaging cylinders can cause them to rupture and act like a rocket due to high internal pressures.

About the SVP Welder Exam

The Saudi Skill Verification Program (SVP) exam for Welder checks technical skills and theory covering welding safety, SMAW, GMAW, GTAW, FCAW processes, electrodes and consumables, joint preparation, welding positions, welding symbols, defects identification, and non-destructive testing (NDT).

Exam sponsor: Takamol Holding / Professional Accreditation Center (PACC), MHRSD. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Multiple-choice computerised exam administered by Takamol Holding / Professional Accreditation Center (PACC), MHRSD.

Time Limit

2.0 hours

Passing Score

50% (theory) + pass practical

Exam / Certification Fees

Varies by country (sponsored or employer-paid)

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

15%

Workplace Safety and Regulations

Practice questions covering personal protective equipment, hot work permits, cylinders, fumes/ventilation, electric shock, and confined space welding.

30%

Welding Processes and Equipment Setup

Practice questions covering Shielded Metal Arc (SMAW), Gas Metal Arc (GMAW), Gas Tungsten Arc (GTAW), and Flux-Cored Arc (FCAW) setup, parameters, and machine characteristics.

15%

Electrodes, Filler Metals, and Consumables

Practice questions covering electrode classifications (E6010, E7018), wire filler standards, alloy selection, and storage/handling requirements.

20%

Joint Preparation, Weld Positions, and Symbols

Practice questions covering joint geometry, alignment, plate and pipe welding positions (1G-6G), and standard welding symbol interpretation.

20%

Quality Control, Defects, and Testing

Practice questions covering welding defects (porosity, undercut, lack of fusion), causes/remedies, visual inspection, and non-destructive testing (NDT) methods.

Preparing for the SVP Welder Exam

What You Need to Know

  • Passing score: 50% (theory) + pass practical
  • Assessment: Multiple-choice computerised exam administered by Takamol Holding / Professional Accreditation Center (PACC), MHRSD.
  • Time limit: 2.0 hours
  • Exam / certification fees: Varies by country (sponsored or employer-paid) Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

SVP Welder: Suggested Study Strategy

1Learn AWS electrode classifications like E6010, E6011, and E7018.
2Study all welding positions (1G through 6G) and welding symbols.
3Understand weld defects (porosity, undercut, slag inclusions) and their causes and NDT testing methods.

Frequently Asked Questions

What is the passing score for SVP Welder?

The passing score is 50% (theory) + pass practical.

Who administers the SVP Welder exam?

The exam is administered by the Takamol Holding / Professional Accreditation Center (PACC), MHRSD.

Which welding processes are covered in the SVP Welder exam?

The exam covers major welding processes including Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW/MIG), Gas Tungsten Arc Welding (GTAW/TIG), and Flux-Cored Arc Welding (FCAW).