PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for SVP Plumber

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Saudi Skill Verification Program (SVP) Construction Trades

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Saudi Skill Verification Program - Building Electrician

Practice Questions

Saudi Skill Verification Program - Carpenter (Saudi Arabia)

Practice Questions

Saudi Skill Verification Program - HVAC / AC Technician (Saudi Arabia)

Practice Questions

Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia)

Practice Questions

Saudi Skill Verification Program - Mason / Block Mason

Practice Questions

Saudi Skill Verification Program - Pipefitter

Practice Questions
Exam Review

Key Facts: SVP Plumber Exam

100

Practice Questions

OpenExamPrep

50% (theory) + pass practical

Pass Score

Official Guidelines

2.0 hours

Time Limit

Exam Rules

Saudi Skill Verification Program - Plumber prep course featuring 100 high-quality practice questions and detailed explanations.

Sample SVP Plumber Practice Questions

Try these sample questions to review concepts for the SVP Plumber exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What is the most critical safety step that a plumber must take before performing any service or repair on an electrical booster pump or water heater?
A.Put on heavy-duty rubber boots and leather gloves
B.Perform Lockout/Tagout (LOTO) procedures on the electrical circuit breaker and verify the system is de-energized
C.Shut off the main water supply valve to the building
D.Drain the water from the heater or pump casing completely
Explanation: Lockout/Tagout (LOTO) on the electrical supply is the primary life-safety control to prevent accidental startup or electrocution while servicing electrical components like booster pumps or water heaters. Shutting water or draining does not isolate the electrical hazard.
2When excavating a trench for laying underground sewer pipes, at what depth must cave-in protection (such as shoring, shielding, or sloping) be installed under standard occupational safety regulations?
A.1.0 meter (approx. 3.3 feet)
B.1.5 meters (approx. 5 feet) or deeper
C.2.0 meters (approx. 6.6 feet)
D.0.5 meters (approx. 1.6 feet)
Explanation: Under OSHA and the international construction safety standards adopted in Saudi Arabia, cave-in protection (shoring, shielding, sloping, or benching) is mandatory for trenches 1.5 meters (5 feet) or deeper, unless the excavation is made entirely in stable rock. Trenches of this depth present a significant risk of soil collapse, which can suffocate workers.
3Which of the following gas combinations poses the highest immediate risk of explosion and suffocation when entering an unventilated public sewer manhole?
A.Methane and Hydrogen Sulfide
B.Oxygen and Nitrogen
C.Carbon Dioxide and Argon
D.Helium and Neon
Explanation: Sewer gas is primarily composed of methane (which is highly explosive and flammable) and hydrogen sulfide (which is extremely toxic, smells of rotten eggs at low levels, and causes rapid respiratory paralysis at high concentrations). Confined space entry requires atmospheric testing for these specific gases.
4Under the Saudi Building Code (SBC 701), what is the minimum required distance that must be maintained between a building's outdoor sewer line and a parallel potable water supply line in the same trench?
A.1.0 meter (approx. 3 feet) horizontal separation in all cases
B.0.5 meters (approx. 1.6 feet) horizontal separation
C.1.5 meters (approx. 5 feet) horizontal separation, unless the water pipe is at least 0.3 meters (12 inches) above the top of the sewer on a solid shelf
D.No separation is required if both pipes are made of plastic materials
Explanation: SBC 701 (based on International Plumbing Code Section 603.2) requires the potable water service pipe and the building sewer to be horizontally separated by not less than 1.5 meters (5 feet) of undisturbed or compacted earth. This separation is not required where the bottom of the water service pipe is at least 0.3 meters (12 inches) above the highest point of the top of the sewer line.
5What type of Personal Protective Equipment (PPE) is most critical when clearing a sewer main blockage using a high-pressure hydro-jetting machine?
A.Thin cotton gloves and a dust mask
B.A full-face shield, heavy-duty waterproof gloves, and safety goggles
C.Anti-static leather safety boots only
D.A high-visibility safety vest and hearing protection only
Explanation: Sewer jetting involves high-pressure water that can atomize wastewater, creating aerosols loaded with pathogenic bacteria, viruses, and parasites. A full-face shield and safety goggles prevent biohazards from contacting eyes, nose, or mouth, while heavy waterproof gloves protect hands from mechanical injury and pathogens.
6What is the primary danger associated with using a hand-held electric pipe threading machine in wet conditions?
A.The threading dies will wear out rapidly due to water cooling
B.Severe electric shock or electrocution if the machine lacks Ground Fault Circuit Interrupter (GFCI) protection
C.The thread sealant (pipe dope) will not dry properly
D.The steel pipe will rust instantly
Explanation: Working with electric power tools in damp or wet environments poses an extreme risk of electric shock. Using a Ground Fault Circuit Interrupter (GFCI) or residual current device (RCD) is mandatory to shut off power instantly if a ground fault occurs.
7When working in a confined space such as an underground valve chamber, what is the minimum allowable oxygen level in the atmosphere to safely enter without supplied-air breathing apparatus?
A.16.0%
B.19.5%
C.23.5%
D.12.0%
Explanation: According to international occupational safety standards, a safe breathable atmosphere must contain between 19.5% and 23.5% oxygen by volume. Anything below 19.5% is considered oxygen-deficient, posing an immediate risk of hypoxia, loss of consciousness, and death.
8Which safety document must be referenceable and available on-site whenever a plumber is handling hazardous chemical solvents, glues, or flux?
A.Safety Data Sheet (SDS / MSDS)
B.Daily plumbing job logbook
C.The Saudi Building Code (SBC) handbook
D.Manufacturer's pipe warranty card
Explanation: A Safety Data Sheet (SDS), formerly known as Material Safety Data Sheet (MSDS), is a standard document that details the chemical properties, physical hazards, health risks, protective measures, and emergency first-aid procedures for handling specific chemical substances.
9Under the Saudi Building Code (SBC 701) regulations, what color must be used to identify non-potable or reclaimed water pipes to prevent accidental connection to the drinking water system?
A.Blue
B.Purple (or violet)
C.Yellow
D.Green
Explanation: SBC 701 and international plumbing standards dictate that non-potable, reclaimed, or recycled water systems must be identified by the color purple. This color-coding is essential to prevent cross-connections and ensure plumbers do not connect drinking water pipes to greywater or irrigation sources.
10What is the correct procedure for safely exiting a trench if a sudden leak fills the excavation with water?
A.Wait inside the trench for a portable submersible pump to drain the water
B.Immediately climb out using a secured ladder that extends at least 1 meter (3 feet) above the top of the trench
C.Attempt to patch the pipe leak from inside the trench before exiting
D.Crawl along the bottom of the trench to the shallowest point
Explanation: Water entering a trench rapidly destabilizes the soil, making a cave-in highly probable. Workers must immediately exit the excavation using a secured ladder. The ladder must extend at least 1 meter (3 feet) above the edge of the trench to allow safe stepping onto solid ground.

About the SVP Plumber Exam

The Saudi Skill Verification Program (SVP) exam for Plumbers checks theoretical knowledge and technical skills covering water supply systems, drainage, waste and vent (DWV) systems, plumbing fixtures, pipe joining, blueprint reading, safety regulations, and compliance with the Saudi Building Code (SBC 701).

Exam sponsor: Takamol Holding / Professional Accreditation Center (PACC), MHRSD. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Multiple-choice computerised exam administered by Takamol Holding / Professional Accreditation Center (PACC), MHRSD.

Time Limit

2.0 hours

Passing Score

50% (theory) + pass practical

Exam / Certification Fees

Varies by country (sponsored or employer-paid)

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

15%

Plumbing Safety, PPE, and Regulations

Practice questions covering plumbing safety, personal protective equipment (PPE), hazard identification, and basic Saudi Building Code (SBC 701) guidelines.

20%

Plumbing Materials, Tools, and Pipe Joining

Practice questions covering pipes (copper, PVC, PEX, cast iron, PPR), hand and power tools, and joining methods.

20%

Water Supply and Distribution Systems

Practice questions covering potable water systems, sizing, pressure regulation, water heaters, and backflow prevention.

25%

Drainage, Waste, and Vent (DWV) Systems

Practice questions covering drainage piping, traps, venting, cleanouts, interceptors, and proper slope/grading.

20%

Fixtures, Appliances, and Troubleshooting

Practice questions covering fixture installation, valve types, testing procedures, leak detection, and troubleshooting common plumbing problems.

Preparing for the SVP Plumber Exam

What You Need to Know

  • Passing score: 50% (theory) + pass practical
  • Assessment: Multiple-choice computerised exam administered by Takamol Holding / Professional Accreditation Center (PACC), MHRSD.
  • Time limit: 2.0 hours
  • Exam / certification fees: Varies by country (sponsored or employer-paid) Official sources

Using Our Practice Resources

  • Work through all 100 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

SVP Plumber: Suggested Study Strategy

1Understand standard plumbing installation techniques, code regulations (SBC 701), and safety measures.
2Review properties of different pipe materials (copper, PVC, CPVC, PEX, PPR, cast iron) and their joining techniques.
3Review detailed explanations of all practice questions to build core theoretical knowledge.

Frequently Asked Questions

What is the passing score for SVP Plumber?

The passing score is 50% (theory) + pass practical.

Who administers the SVP Plumber exam?

The exam is administered by Takamol Holding in collaboration with the Professional Accreditation Center (PACC) under the Ministry of Human Resources and Social Development (MHRSD).