100+ Free TESDA Driving NC II Practice Questions

Pass your Driving National Certificate Level II (TESDA Philippines) exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Philippines TESDA Driving NC II

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

TESDA Driving (Articulated Vehicle / Heavy Truck) NC III Assessment (Philippines)

Practice Questions100 questions

2026 Statistics

Key Facts: TESDA Driving NC II Exam

₱819–₱1,034

Assessment Fee

TESDA

50 items

Written Test (approx.)

TESDA Training Regulation

4 core

Competency Areas

TESDA TR

18+

Minimum Age

TESDA

NC II

Certificate Level

Philippine TVET

Nationwide

Recognition

TESDA

The TESDA Driving NC II is a competency-based assessment administered by the Technical Education and Skills Development Authority (TESDA) in the Philippines. It certifies professional competency in operating light motor vehicles under LTO Restriction Codes 1 and 2. The assessment combines a written test of approximately 50 MCQ items with a practical driving demonstration and oral questioning. The assessment fee ranges from ₱819 to ₱1,034 depending on vehicle provision.

Sample TESDA Driving NC II Practice Questions

Try these sample questions to test your TESDA Driving NC II exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1What does the letter 'W' stand for in the pre-trip inspection acronym 'BLOWBAGETS' in the Philippines?

A.Water

B.Windshield

C.Wheel alignment

D.Wiper motor

Explanation: In the standard Philippine pre-trip safety checklist 'BLOWBAGETS' (Battery, Lights, Oil, Water, Brakes, Air, Gas, Engine, Tire, Self), the letter 'W' stands for Water. This reminds the driver to inspect the coolant level in the radiator and reservoir to prevent engine overheating.

2When checking the engine oil level using a dipstick, what is the correct state of the vehicle and engine?

A.Parked on a level surface with the engine off and cooled down

B.Parked on an incline with the engine idling

C.Parked on a level surface with the engine running at high RPM

D.Elevated on a jack with the engine running

Explanation: To obtain an accurate engine oil level reading, the vehicle must be parked on a flat, level surface with the engine shut off. Waiting a few minutes after shutting down allows the oil to drain back completely into the oil pan.

3Which tire detail determines the correct inflation pressure for a light vehicle under normal driving conditions?

A.The vehicle manufacturer's recommendation on the door placard or owner's manual

B.The maximum pressure stamped on the tire sidewall

C.The visual bulge at the bottom of the tire

D.The average pressure of all other tires on the road

Explanation: The correct tire pressure is specified by the vehicle manufacturer and can be found on a placard on the driver's door jamb, inside the glovebox, fuel filler door, or in the owner's manual. Sticking to this ensures proper handling, tread wear, and braking efficiency.

4What is the function of the battery electrolyte in a lead-acid vehicle battery?

A.To conduct electrical current between the positive and negative plates

B.To cool the internal components of the alternator

C.To lubricate the battery terminals and prevent rust

D.To absorb vibrations from the vehicle engine

Explanation: In a lead-acid battery, the electrolyte (a mixture of sulfuric acid and distilled water) facilitates the chemical reaction that stores and releases electrical energy by conducting ions between the positive and negative plates.

5If a vehicle brake fluid reservoir level is close to the 'MIN' mark, what should the driver do first?

A.Check the brake pads for wear and inspect the system for fluid leaks before topping up

B.Fill it to the brim with engine oil to save cost

C.Ignore it until the brake pedal starts sinking to the floor

D.Add tap water to dilute the remaining fluid

Explanation: A low brake fluid level is commonly caused by worn brake pads (which allows pistons to extend further, drawing fluid down) or a leak in the hydraulic line. The system must be inspected and topped up only with the recommended brake fluid type (DOT 3/4).

6Which color of exhaust smoke typically indicates that engine oil is leaking into the combustion chambers?

A.Blue or blue-gray smoke

B.White or light gray smoke

C.Black smoke

D.Invisible or colorless smoke

Explanation: Blue or blue-gray exhaust smoke indicates that engine oil is burning along with the fuel inside the cylinders. This is usually caused by worn piston rings, valve seals, or PCV system failures.

7How should a driver check the tension of the engine accessory drive belts (serpentine/alternator belt)?

A.Press down on the belt mid-way between the pulleys to measure deflection

B.Twist the belt until it snaps to verify its elasticity

C.Listen for squealing sounds while revving the engine in neutral

D.Splash water on the belt to see if it slips

Explanation: Tension is checked by pressing on the longest span between pulleys; it should deflect by about 1/4 to 1/2 inch (6 to 12 mm). Excessive deflection indicates a loose belt, while too little indicates it is overtightened.

8What is the main danger of using a fuse with a higher ampere rating than specified by the vehicle manufacturer?

A.It can allow excess current to overheat the wiring and cause an electrical fire

B.It will cause the battery to discharge rapidly when parked

C.It will damage the starter motor during engine startup

D.It will decrease the brightness of the vehicle's headlights

Explanation: Fuses are designed to melt and break the circuit if the current exceeds safe limits. A higher-amp fuse won't blow when the circuit overloads, allowing the excessive current to overheat and melt the wiring harness, posing a major fire hazard.

9What is the recommended tool and procedure to clean corrosion from battery terminal clamps?

A.Use a wire battery brush and a solution of baking soda and warm water

B.Scrape with a flathead screwdriver and rinse with gasoline

C.Sand with coarse sandpaper while the engine is running

D.Spray with brake cleaner and wipe with a dry cloth

Explanation: A battery brush and a mixture of baking soda (sodium bicarbonate) and warm water is the standard method. The baking soda neutralizes the highly acidic lead sulfate corrosion, allowing it to be safely brushed off without damaging the battery terminals.

10A vehicle's steering wheel vibrates significantly only when driving at speeds above 80 km/h. What is the most likely cause?

A.Out-of-balance front wheels

B.Worn rear brake drums

C.Low power steering fluid level

D.Unsecured cargo in the trunk

Explanation: Wheel imbalance is a common cause of high-speed steering wheel vibration. The uneven weight distribution in the tire/wheel assembly causes centripetal forces that resonate at higher speeds, vibrating the steering column.

About the TESDA Driving NC II Exam

The TESDA Driving NC II assessment certifies competency in operating light motor vehicles (LTO Restriction Codes 1 and 2) professionally and safely. It covers vehicle maintenance, driving skills, Philippine traffic rules, and emergency procedures.

Questions

50 scored questions

Time Limit

Varies by assessment center (typically half-day for full assessment)

Passing Score

Competent / Not Yet Competent (criterion-referenced)

Exam Fee

₱819–₱1,034 (varies if candidate or center provides vehicle) (TESDA (Technical Education and Skills Development Authority))

TESDA Driving NC II Exam Content Outline

20%

Vehicle Maintenance and Servicing

Pre-starting checks, fluid levels, tire inspection, battery checks, and basic troubleshooting

30%

Light Vehicle Operation

Safe driving, maneuvering, parking, highway driving, night driving, and fuel efficiency

30%

Traffic Rules and Regulations

Philippine road signs, traffic signals, right-of-way, speed limits, and traffic laws

10%

Accident-Emergency Procedures

Accident response, first aid, emergency vehicles, reporting, and vehicle breakdown

10%

Basic and Common Competencies

Workplace communication, OHS, professionalism, calculations, and vehicle manuals

How to Pass the TESDA Driving NC II Exam

What You Need to Know

Passing score: Competent / Not Yet Competent (criterion-referenced)
Exam length: 50 questions
Time limit: Varies by assessment center (typically half-day for full assessment)
Exam fee: ₱819–₱1,034 (varies if candidate or center provides vehicle)

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

TESDA Driving NC II Study Tips from Top Performers

1Review all Philippine road signs — warning (triangular red border), regulatory (round red border), and informational (blue/green) signs

2Practice pre-trip vehicle inspection routines including fluid checks, tire pressure, and battery condition

3Study the key provisions of Republic Act 4136 (Land Transportation and Traffic Code) for speed limits and right-of-way rules

4Familiarize yourself with the Anti-Distracted Driving Act and seatbelt laws

5Practice parallel parking, vertical parking, and hill starts as these are commonly assessed in the practical exam

Frequently Asked Questions

What is the TESDA Driving NC II assessment?

The TESDA Driving NC II is a competency-based assessment that certifies your ability to operate light motor vehicles (cars) professionally and safely. It is administered by TESDA-accredited assessment centers across the Philippines and results in a National Certificate (NC II) recognized nationwide.

How much does the TESDA Driving NC II assessment cost?

The assessment fee ranges from approximately ₱819 to ₱1,034. The lower fee applies when you provide your own vehicle for the practical assessment; the higher fee applies when the assessment center provides the vehicle. Confirm the exact fee with your chosen assessment center.

What are the requirements to take the Driving NC II assessment?

You must be at least 18 years old and hold at least a Student Driver's Permit from the LTO. You'll also need to submit a PSA Birth Certificate, passport-size photos, educational credentials, and a completed Self-Assessment Guide (SAG) form.

What topics are covered in the written test?

The written test covers four core competencies: minor vehicle maintenance and servicing, light vehicle driving knowledge, Philippine traffic rules and regulations (including road signs, signals, and speed limits), and accident-emergency procedures. Basic workplace competencies like OHS and communication are also assessed.

What happens if I don't pass the assessment?

If you are rated 'Not Yet Competent,' you can retake the assessment after additional training or practice. There is no fixed waiting period, but your assessor will typically recommend areas to improve before your next attempt.

Is the TESDA Driving NC II the same as an LTO driver's license?

No. The TESDA Driving NC II is a national competency certificate that validates your professional driving skills, while the LTO driver's license is a legal permit to operate a motor vehicle on Philippine roads. Many employers, especially in the transport and logistics industry, require both.