PracticeVideosBlogFlashcardsEspañol
All Practice Exams

100+ Free PIE VMBO GL Practice Questions

Prepare for the Netherlands VMBO GL Produceren, installeren en energie — Centraal schriftelijk en praktisch examen (CSPE) exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
Not published as a fixed national pass-rate percentage for PIE VMBO GL CSPE on Examenblad Pass Rate
100+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Netherlands VMBO GL/TL (Gemengde / Theoretische Leerweg)

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Netherlands VMBO GL Bouwen, wonen en interieur

Practice Questions

Netherlands VMBO GL Dienstverlening en producten

Practice Questions

Netherlands VMBO GL Economie en ondernemen nieuwe stijl

Practice Questions

Netherlands VMBO GL Groen

Practice Questions

Netherlands VMBO GL Horeca, bakkerij en recreatie

Practice Questions

Netherlands VMBO GL Media, vormgeving en ICT

Practice Questions
2026 Statistics

Key Facts: PIE VMBO GL Exam

CSPE

Centraal schriftelijk en praktisch examen for PIE (not a pure MCQ CE)

Examenblad PIE vmbo gl 2026; CSPE topic page

2 onderdelen

VMBO GL PIE CSPE 2026 uses onderdelen A–B

Examenblad vakspecifieke informatie PIE 2026 (gl)

1 Apr–17 Jul 2026

Afnameperiode profielvak-CSPEs

Examenblad PIE vmbo gl 2026

Syllabus 2026

No content changes vs 2025 per vakspecifieke informatie

Examenblad vakspecifieke informatie PIE 2026

Richttijd

Guide time per onderdeel; unused time does not transfer

Examenblad CSPE richttijd guidance 2026

≥5.5

Typical subject pass on Dutch 1–10 scale

Dutch VO grading practice / uitslagbepaling vmbo

Dutch

Official CSPE language (officialLanguages: nl)

CvTE / Examenblad VO practice

100

Free English MCQ study items on this page

OpenExamPrep study adaptation

Official VMBO GL PIE 2026 is a performance-based CSPE (two onderdelen A–B, 1 Apr–17 Jul 2026) plus school SE under CvTE/Examenblad — not an MCQ paper. These 100 English MCQs study production, installation, energy, safety, measurement and sustainability only.

Sample PIE VMBO GL Practice Questions

Try these sample questions to test your PIE VMBO GL exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1On a technical drawing (werktekening), what does a dimension written as 50 mm usually mean?
A.The hole diameter only
B.The measured length of that feature on the finished part
C.The cutting speed in metres per minute
D.The electrical voltage of the machine
Explanation: Workshop drawings label linear dimensions in millimetres so you can check the finished feature size with a ruler or calliper.
2Which hand tool is primarily used to remove small amounts of metal and smooth edges after sawing?
A.Torque wrench
B.File (vijl)
C.Pipe bender
D.Insulation stripper
Explanation: A file (vijl) shapes and deburrs metal by abrasive cutting with hand strokes after rough sawing.
3Before drilling a hole in thin sheet metal, what should you do to keep the drill from walking?
A.Increase spindle speed to maximum first
B.Centre-punch or mark and start with a small pilot hole / use a centre mark
C.Oil the entire sheet heavily so it floats
D.Hold the sheet loosely so it can move freely
Explanation: A centre punch or clear mark plus a controlled start (often a pilot) keeps the bit from skating on the surface.
4What is tapping (tappen) used for in metalwork?
A.Cutting external screw thread on a bolt
B.Cutting internal screw thread in a hole
C.Measuring electrical resistance
D.Bending sheet metal to 90°
Explanation: Tapping cuts an internal thread so a machine screw or bolt can engage the hole.
5When reading a thread table before tapping, what information do you mainly need?
A.Paint colour of the workpiece
B.Tap size, drill diameter for the core hole, and thread pitch/standard
C.Only the ambient room temperature
D.The school’s Wi-Fi password
Explanation: Thread tables give tap designation, recommended drill for the core hole, and pitch/standard so the thread forms correctly.
6Blind rivets (blindklinken) are useful because they:
A.Require access to both sides of the joint with a nut
B.Allow joining sheet when you only have good access from one side
C.Replace all welding permanently in every industry
D.Only work on wood
Explanation: Blind rivets set from one side, which is ideal for hollow or closed structures.
7After assembling a sheet-metal product, a dimensional check (maatcontrole) means you:
A.Only look at the paint finish
B.Compare key lengths/holes to the drawing using measuring tools
C.Throw away the drawing
D.Energise the circuit at full mains voltage
Explanation: Maatcontrole verifies sizes and positions against the werktekening with callipers, tape or gauges.
8On a CSPE order list (bestellijst), a machining allowance (verspaningstoegift) is listed separately for some stock pieces. Why?
A.So paint colour can be matched to the allowance
B.So the supplier/school issues enough raw length/thickness to machine down to finished size
C.So electrical voltage can be derated
D.So PE colour coding changes
Explanation: Verspaningstoegift is extra stock so cutting/machining can reach the finished drawing size; Examenblad notes alerting suppliers when allowance is listed separately.
9When sawing metal by hand, the correct general technique is to:
A.Force the blade sideways to cut faster
B.Use steady forward cutting strokes with appropriate blade and support the workpiece
C.Bend the blade into a U-shape for speed
D.Saw without clamping so the part can spin
Explanation: Supported, clamped work and controlled strokes with a suitable blade give a straight, safe cut.
10A verspaningstoegift (machining allowance) on a blank means:
A.Extra material left so machining can reach the final size
B.A fee paid to the exam board
C.The electrical insulation thickness
D.The paint layer thickness only
Explanation: Machining allowance is sacrificial stock so finishing cuts can achieve drawing dimensions and surface quality.

About the PIE VMBO GL Exam

Produceren, installeren en energie (PIE) is the VMBO beroepsgerichte profielvak combining metal/production, installation technology and electrical/energy skills. For VMBO GL (gemengde leerweg) 2026 the centraal examen is a CSPE with two onderdelen A–B during the national afnameperiode 1 April–17 July 2026. Examenblad links the Syllabus PIE vmbo 2026 and examenprogramma; vakspecifieke informatie notes the 2026 syllabus has no content changes versus 2025 and that GL CSPE structure is A (merged former A+B) and B (former C). Official CSPE tasks are practical and Dutch-language; GL often includes programmable-relay / ladder-diagram work. These 100 English MCQs adapt assessable knowledge on production, installation, energy, electrical safety, measurement and sustainability for study — they cannot certify workshop skill.

Assessment

Eindexamen for the PIE profielvak = CSPE + Schoolexamen (SE). CSPE for VMBO GL 2026 has two onderdelen (A–B): A merges former A+B; B corresponds to former C. Practical workshop tasks (materials processing, wiring/relay or programmable-relay boards, ladder logic such as Easy E4) combine with written/Facet theory. Syllabus modules: Ontwerpen en maken; Bewerken en verbinden van materialen; Besturen en automatiseren; Installeren en monteren. Official language is Dutch.

Time Limit

Richttijd per CSPE onderdeel in Instructie Examinator / opdrachtenboekje (netto exam time; unused time cannot transfer). Afnameperiode profielvak-CSPEs 2026: Wed 1 Apr 2026 – Fri 17 Jul 2026. SE timing follows school PTA.

Passing Score

Dutch 1–10 scale; typically ≥5.5 to pass a subject. CSPE points converted via N-term / omzettingstabel for beroepsgerichte vakken; final grade combines CE (CSPE) and SE per VMBO uitslagbepaling.

Exam Fee

No separate published per-subject national fee for regular school VMBO GL candidates. Schools organise materials/outillage for the practical CSPE. (College voor Toetsen en Examens (CvTE) via Examenblad; school conducts CSPE afname; Facet for applicable theory parts)

PIE VMBO GL Exam Content Outline

Core CSPE / syllabus

Production and materials processing

Drawings, cutting/forming metals and plastics, joining, dimensional quality checks and machining allowances.

Core CSPE / syllabus

Installation and mounting

Assembling mechanical and building-services components safely to specification, including DIN-rail boards.

Core CSPE / syllabus

Energy, circuits and automation

Electrotechnology, relays/wiring, sensors/actuators, programmable relays and ladder logic, energy concepts.

Cross-cutting

Electrical and mechanical safety

PPE, isolation mindset, machine safety and recognising unsafe practice.

Cross-cutting

Measurement and calculation

Measuring tools, Ohm’s law, power, series/parallel and workshop calculations.

Context

Sustainability

Energy efficiency, renewables awareness, waste and material efficiency.

How to Pass the PIE VMBO GL Exam

What You Need to Know

  • Passing score: Dutch 1–10 scale; typically ≥5.5 to pass a subject. CSPE points converted via N-term / omzettingstabel for beroepsgerichte vakken; final grade combines CE (CSPE) and SE per VMBO uitslagbepaling.
  • Assessment: Eindexamen for the PIE profielvak = CSPE + Schoolexamen (SE). CSPE for VMBO GL 2026 has two onderdelen (A–B): A merges former A+B; B corresponds to former C. Practical workshop tasks (materials processing, wiring/relay or programmable-relay boards, ladder logic such as Easy E4) combine with written/Facet theory. Syllabus modules: Ontwerpen en maken; Bewerken en verbinden van materialen; Besturen en automatiseren; Installeren en monteren. Official language is Dutch.
  • Time limit: Richttijd per CSPE onderdeel in Instructie Examinator / opdrachtenboekje (netto exam time; unused time cannot transfer). Afnameperiode profielvak-CSPEs 2026: Wed 1 Apr 2026 – Fri 17 Jul 2026. SE timing follows school PTA.
  • Exam fee: No separate published per-subject national fee for regular school VMBO GL candidates. Schools organise materials/outillage for the practical CSPE.

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

PIE VMBO GL Study Tips from Top Performers

1Map school practice to the four syllabus modules: design/make, materials processing/joining, control/automation, and install/mount.
2Drill electrical safety, measurement and ladder-logic / programmable-relay concepts (e.g. Easy E4) before CSPE wiring tasks.
3Practise reading werktekeningen, order lists with machining allowance, and checking sizes with callipers/tape.
4Use Ohm’s law, series/parallel and P = U × I for energy and circuit calculations that support theory items.
5Treat these English MCQs as concept checks only; complete real CSPE practicals and Dutch theory in Facet/opdrachtenboekjes.

Frequently Asked Questions

What is the official exam format for VMBO GL PIE?

The centraal examen is a CSPE (centraal schriftelijk en praktisch examen). For VMBO GL 2026 it has two onderdelen (A–B) with practical and written/Facet parts. It is performance-based, not a national multiple-choice paper.

How does GL CSPE structure differ from BB?

BB/KB CSPEs generally use four onderdelen (A–D). PIE GL 2026 uses two: onderdeel A merges former A+B; onderdeel B matches former C (per Examenblad vakspecifieke informatie).

When is the 2026 PIE CSPE taken?

Within the profielvak-CSPE afnameperiode Wednesday 1 April 2026 through Friday 17 July 2026. Schools schedule onderdelen; candidates must finish one onderdeel before starting the next.

Do these MCQs replace the CSPE practical?

No. Official assessment requires completing practical workshop and related CSPE tasks in Dutch. This bank is an English-language study adaptation of knowledge and judgment only.

What syllabus should I follow?

Use the Syllabus produceren, installeren en energie vmbo 2026 linked from Examenblad (vakspecifieke informatie: no content changes vs 2025) and the examenprogramma PIE vmbo. The syllabus is leading over any textbook method.

How is PIE graded?

On the Dutch 1–10 scale. CSPE points are converted with an N-term / omzettingstabel; the final subject grade normally averages CSPE and SE. A typical pass threshold is ≥5.5.

Is there a national exam fee?

Regular school candidates do not pay a separate published national per-subject CSPE fee. Ask your school about any material costs for practical tasks.